From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Fri, 13 Apr 2012 19:32:41 -0300 From: Gustavo Padovan To: Steven Harms Cc: Marcel Holtmann , Johan Hedberg , linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module Message-ID: <20120413223241.GJ1680@joana> References: <1334342755-7371-1-git-send-email-sjharms@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1334342755-7371-1-git-send-email-sjharms@gmail.com> List-ID: Hi Steven, * Steven Harms [2012-04-13 14:45:55 -0400]: > This change adds 0x0489:0xe033 to the btusb module. > > This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook. You should break lines on column 80. I fixed this one for you. > Output from /sys/kernel/debug/usb/devices: > > T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e033 Rev= 2.29 > S: Manufacturer=Broadcom Corp > S: Product=Acer Module > S: SerialNumber=60D819F74101 > C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) > > Signed-off-by: Steven Harms > --- > drivers/bluetooth/btusb.c | 3 +++ > 1 file changed, 3 insertions(+) Patch is applied to both bluetooth and bluetooth-next. Thanks. Gustavo