From: Gustavo Padovan <gustavo@padovan.org>
To: "Michael Grützner" <mgruetzn@gmx.de>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
Date: Wed, 2 May 2012 18:28:55 -0300 [thread overview]
Message-ID: <20120502212855.GC16030@joana> (raw)
In-Reply-To: <5301735.uaK8kx1qmQ@dagobah>
Hi Michael,
* Michael Gr=FCtzner <mgruetzn@gmx.de> [2012-05-02 22:33:40 +0200]:
> From: Michael Gruetzner <mgruetzn@gmx.de>
>=20
> Add Foxconn/Hon Hai AR5BBU22 Bluetooth Module( 0x489:0xE03C) to
> the blacklist of btusb module and add it to the ath3k module to properly
> load the firmware in Kernel 3.3.4
> The device is integrated in e.g. some Acer Aspire 7750G.
>=20
> Output from /sys/kernel/debug/usb/devices:
>=20
> T: Bus=3D01 Lev=3D02 Prnt=3D02 Port=3D05 Cnt=3D02 Dev#=3D 6 Spd=3D12 =
MxCh=3D 0
> D: Ver=3D 2.00 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
> P: Vendor=3D0489 ProdID=3De03c Rev=3D 0.02
> S: Manufacturer=3DAtheros Communications
> S: Product=3DBluetooth USB Host Controller
> S: SerialNumber=3DAlaska Day 2006
> C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA
> I:* If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
> E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> I:* If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> =20
> Signed-off-by: Michael Gruetzner <mgruetzn@gmx.de>
> ---
> drivers/bluetooth/ath3k.c | 6 ++++++
> drivers/bluetooth/btusb.c | 3 +++
> 2 files changed, 9 insertions(+)
Patch has been applied to both bluetooth and bluetooth-next trees.
Thanks.
Gustavo
next prev parent reply other threads:[~2012-05-02 21:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-30 23:43 [PATCH 1/1] bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Michael Grützner
2012-05-02 15:08 ` Gustavo Padovan
2012-05-02 20:33 ` Michael Grützner
2012-05-02 21:28 ` Gustavo Padovan [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-04-30 23:37 Michael Grützner
2012-04-30 1:41 Michael Grützner
2012-04-30 9:33 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120502212855.GC16030@joana \
--to=gustavo@padovan.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mgruetzn@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).