linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFCv2 0/6] Draft Software/Virtual AMP80211
@ 2012-04-24 13:17 Andrei Emeltchenko
  2012-04-24 13:17 ` [RFCv2 1/6] mac80211: softamp: Adds Bluetooth Software AMP Andrei Emeltchenko
                   ` (5 more replies)
  0 siblings, 6 replies; 12+ messages in thread
From: Andrei Emeltchenko @ 2012-04-24 13:17 UTC (permalink / raw)
  To: linux-bluetooth, linux-wireless

From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>

RFC for Software / Virtual _DRAFT_ implementation of Bluetooth High Speed
by using wireless driver. Currently it can be used for testing Bluetooth
A2MP protocol.

Changes:
	RFCv2: Process basic HCI commands and basic data traffic; added skeleton
	for Netlink comms, took comments from reviewers.
	RFCv1: Initial release.

TODO:
	Change names from vamp to <softamp|bt_softamp|etc>

Main ideas:
 - Use existing wireless infrastructure nl80211, mac80211.
 - Use virtual interface of type NL80211_IFTYPE_BLUETOOTH_AMP. Then all
drivers supporting virtual interface should work.

After modifying iw it will be enabled by adding new virtual interface.

# iw phy <physical device> interface add vamp type vamp
# iw dev
phy#0
	Interface vamp
		ifindex 6
		type Virtual AMP
...
# hciconfig 
hci1:	Type: AMP  Bus: VIRTUAL
	BD Address: 00:00:00:00:00:00  ACL MTU: 0:0  SCO MTU: 0:0
	DOWN 
	RX bytes:0 acl:0 sco:0 events:0 errors:0
	TX bytes:0 acl:0 sco:0 commands:0 errors:0
...

Andrei Emeltchenko (6):
  mac80211: softamp: Adds Bluetooth Software AMP
  mac80211: softamp: Adds build config option
  hwsim: Adds support for BT SOFTAMP for testing
  mac80211: softamp: Handle assoc request
  mac80211: softamp: Netlink interface to softamp
  mac80211: softamp: Handle data traffic

 drivers/net/wireless/mac80211_hwsim.c |    3 +-
 include/linux/ieee80211.h             |   13 +
 include/linux/nl80211.h               |    1 +
 net/mac80211/Kconfig                  |    9 +
 net/mac80211/Makefile                 |    2 +
 net/mac80211/ieee80211_i.h            |    5 +
 net/mac80211/iface.c                  |    9 +
 net/mac80211/rx.c                     |    4 +
 net/mac80211/sta_info.h               |    4 +
 net/mac80211/util.c                   |    1 +
 net/mac80211/virtual_amp.c            |  675 +++++++++++++++++++++++++++++++++
 net/mac80211/virtual_amp.h            |   96 +++++
 12 files changed, 821 insertions(+), 1 deletion(-)
 create mode 100644 net/mac80211/virtual_amp.c
 create mode 100644 net/mac80211/virtual_amp.h

-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2012-05-07 11:59 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-24 13:17 [RFCv2 0/6] Draft Software/Virtual AMP80211 Andrei Emeltchenko
2012-04-24 13:17 ` [RFCv2 1/6] mac80211: softamp: Adds Bluetooth Software AMP Andrei Emeltchenko
2012-05-07 11:41   ` Johannes Berg
2012-05-07 11:56     ` Andrei Emeltchenko
2012-05-07 11:59       ` Johannes Berg
2012-04-24 13:17 ` [RFCv2 2/6] mac80211: softamp: Adds build config option Andrei Emeltchenko
2012-04-24 13:17 ` [RFCv2 3/6] hwsim: Adds support for BT SOFTAMP for testing Andrei Emeltchenko
2012-04-24 13:17 ` [RFCv2 4/6] mac80211: softamp: Handle assoc request Andrei Emeltchenko
2012-05-07 11:42   ` Johannes Berg
2012-04-24 13:17 ` [RFCv2 5/6] mac80211: softamp: Netlink interface to softamp Andrei Emeltchenko
2012-05-07 11:42   ` Johannes Berg
2012-04-24 13:17 ` [RFCv2 6/6] mac80211: softamp: Handle data traffic Andrei Emeltchenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).