From: Gustavo Padovan <gustavo@padovan.org>
To: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Cc: linux-bluetooth@vger.kernel.org,
Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Subject: Re: [PATCH] [RESEND] btusb,ath3k: add support for 0930:0219
Date: Mon, 11 Jun 2012 23:56:00 -0300 [thread overview]
Message-ID: <20120612025600.GC24440@joana> (raw)
In-Reply-To: <1379642.mNRPMjYO4c@ilstop>
Hi Giancarlo,
* Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> [2012-06-10 08:33:11 +0200]:
> Hi,
>
> this patch adds support for the AR3012 chip found on the Toshiba Sallite M840-1000-XQ.
>
> usb-devices shows:
>
> T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0930 ProdID=0219 Rev=00.02
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> Thanks,
>
> Giancarlo
>
> Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
> ---
> diff -urpN -X linux-3.5-rc1/Documentation/dontdiff linux-3.5-rc1.org/drivers/bluetooth/ath3k.c linux-3.5-rc1/drivers/bluetooth/ath3k.c
> --- linux-3.5-rc1.org/drivers/bluetooth/ath3k.c 2012-06-03 03:29:26.000000000 +0200
> +++ linux-3.5-rc1/drivers/bluetooth/ath3k.c 2012-06-06 10:29:11.325484026 +0200
> @@ -77,6 +77,7 @@ static struct usb_device_id ath3k_table[
> { USB_DEVICE(0x04CA, 0x3005) },
> { USB_DEVICE(0x13d3, 0x3362) },
> { USB_DEVICE(0x0CF3, 0xE004) },
> + { USB_DEVICE(0x0930, 0x0219) },
>
> /* Atheros AR5BBU12 with sflash firmware */
> { USB_DEVICE(0x0489, 0xE02C) },
> @@ -101,6 +102,7 @@ static struct usb_device_id ath3k_blist_
> { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU22 with sflash firmware */
> { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
> diff -urpN -X linux-3.5-rc1/Documentation/dontdiff linux-3.5-rc1.org/drivers/bluetooth/btusb.c linux-3.5-rc1/drivers/bluetooth/btusb.c
> --- linux-3.5-rc1.org/drivers/bluetooth/btusb.c 2012-06-03 03:29:26.000000000 +0200
> +++ linux-3.5-rc1/drivers/bluetooth/btusb.c 2012-06-06 10:29:35.616401307 +0200
> @@ -139,6 +139,7 @@ static struct usb_device_id blacklist_ta
> { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU12 with sflash firmware */
> { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
Patch has been applied to bluetooth.git. Thanks.
Gustavo
prev parent reply other threads:[~2012-06-12 2:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-10 6:33 [PATCH] [RESEND] btusb,ath3k: add support for 0930:0219 Giancarlo Formicuccia
2012-06-12 2:56 ` Gustavo Padovan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120612025600.GC24440@joana \
--to=gustavo@padovan.org \
--cc=giancarlo.formicuccia@gmail.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).