From: Andrei Emeltchenko <Andrei.Emeltchenko.news@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCHv2 hcidump 1/4] Headers for AMP ASSOC dump functions
Date: Thu, 14 Jun 2012 10:25:14 +0300 [thread overview]
Message-ID: <20120614072512.GB24061@aemeltch-MOBL1> (raw)
In-Reply-To: <1338887361-11585-1-git-send-email-Andrei.Emeltchenko.news@gmail.com>
On Tue, Jun 05, 2012 at 12:09:18PM +0300, Andrei Emeltchenko wrote:
> From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
ping
>
> ---
> lib/a2mp.h | 38 -------------
> lib/amp.h | 174 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 174 insertions(+), 38 deletions(-)
> create mode 100644 lib/amp.h
>
> diff --git a/lib/a2mp.h b/lib/a2mp.h
> index 61f1c1e..da937d1 100644
> --- a/lib/a2mp.h
> +++ b/lib/a2mp.h
> @@ -142,44 +142,6 @@ struct a2mp_disconn_rsp {
> #define A2MP_STATUS_PHYS_LINK_EXISTS 0x05
> #define A2MP_STATUS_SECURITY_VIOLATION 0x06
>
> -#define A2MP_MAC_ADDR_TYPE 1
> -#define A2MP_PREF_CHANLIST_TYPE 2
> -#define A2MP_CONNECTED_CHAN 3
> -#define A2MP_PAL_CAP_TYPE 4
> -#define A2MP_PAL_VER_INFO 5
> -
> -struct a2mp_tlv {
> - uint8_t type;
> - uint16_t len;
> - uint8_t val[0];
> -} __attribute__ ((packed));
> -
> -struct a2mp_pal_ver {
> - uint8_t ver;
> - uint16_t company_id;
> - uint16_t sub_ver;
> -} __attribute__ ((packed));
> -
> -struct a2mp_country_triplet {
> - union {
> - struct {
> - uint8_t first_channel;
> - uint8_t num_channels;
> - int8_t max_power;
> - } __attribute__ ((packed)) chans;
> - struct {
> - uint8_t reg_extension_id;
> - uint8_t reg_class;
> - uint8_t coverage_class;
> - } __attribute__ ((packed)) ext;
> - };
> -} __attribute__ ((packed));
> -
> -struct a2mp_chan_list {
> - uint8_t country_code[3];
> - struct a2mp_country_triplet triplets[0];
> -} __attribute__ ((packed));
> -
> #ifdef __cplusplus
> }
> #endif
> diff --git a/lib/amp.h b/lib/amp.h
> new file mode 100644
> index 0000000..f364f85
> --- /dev/null
> +++ b/lib/amp.h
> @@ -0,0 +1,174 @@
> +/*
> + *
> + * BlueZ - Bluetooth protocol stack for Linux
> + *
> + * Copyright (C) 2010-2011 Code Aurora Forum. All rights reserved.
> + * Copyright (C) 2012 Intel Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __AMP_H
> +#define __AMP_H
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#define AMP_MGR_CID 0x03
> +
> +/* AMP manager codes */
> +#define AMP_COMMAND_REJ 0x01
> +#define AMP_DISCOVER_REQ 0x02
> +#define AMP_DISCOVER_RSP 0x03
> +#define AMP_CHANGE_NOTIFY 0x04
> +#define AMP_CHANGE_RSP 0x05
> +#define AMP_INFO_REQ 0x06
> +#define AMP_INFO_RSP 0x07
> +#define AMP_ASSOC_REQ 0x08
> +#define AMP_ASSOC_RSP 0x09
> +#define AMP_LINK_REQ 0x0a
> +#define AMP_LINK_RSP 0x0b
> +#define AMP_DISCONN_REQ 0x0c
> +#define AMP_DISCONN_RSP 0x0d
> +
> +typedef struct {
> + uint8_t code;
> + uint8_t ident;
> + uint16_t len;
> +} __attribute__ ((packed)) amp_mgr_hdr;
> +#define AMP_MGR_HDR_SIZE 4
> +
> +/* AMP ASSOC structure */
> +typedef struct {
> + uint8_t type_id;
> + uint16_t len;
> + uint8_t data[0];
> +} __attribute__ ((packed)) amp_assoc_tlv;
> +
> +typedef struct {
> + uint16_t reason;
> +} __attribute__ ((packed)) amp_cmd_rej_parms;
> +
> +typedef struct {
> + uint16_t mtu;
> + uint16_t mask;
> +} __attribute__ ((packed)) amp_discover_req_parms;
> +
> +typedef struct {
> + uint16_t mtu;
> + uint16_t mask;
> + uint8_t controller_list[0];
> +} __attribute__ ((packed)) amp_discover_rsp_parms;
> +
> +typedef struct {
> + uint8_t id;
> +} __attribute__ ((packed)) amp_info_req_parms;
> +
> +typedef struct {
> + uint8_t id;
> + uint8_t status;
> + uint32_t total_bandwidth;
> + uint32_t max_bandwidth;
> + uint32_t min_latency;
> + uint16_t pal_caps;
> + uint16_t assoc_size;
> +} __attribute__ ((packed)) amp_info_rsp_parms;
> +
> +typedef struct {
> + uint8_t id;
> + uint8_t status;
> + amp_assoc_tlv assoc;
> +} __attribute__ ((packed)) amp_assoc_rsp_parms;
> +
> +typedef struct {
> + uint8_t local_id;
> + uint8_t remote_id;
> + amp_assoc_tlv assoc;
> +} __attribute__ ((packed)) amp_link_req_parms;
> +
> +typedef struct {
> + uint8_t local_id;
> + uint8_t remote_id;
> + uint8_t status;
> +} __attribute__ ((packed)) amp_link_rsp_parms;
> +
> +typedef struct {
> + uint8_t local_id;
> + uint8_t remote_id;
> +} __attribute__ ((packed)) amp_disconn_req_parms;
> +
> +#define A2MP_MAC_ADDR_TYPE 1
> +#define A2MP_PREF_CHANLIST_TYPE 2
> +#define A2MP_CONNECTED_CHAN 3
> +#define A2MP_PAL_CAP_TYPE 4
> +#define A2MP_PAL_VER_INFO 5
> +
> +struct amp_tlv {
> + uint8_t type;
> + uint16_t len;
> + uint8_t val[0];
> +} __attribute__ ((packed));
> +
> +struct amp_pal_ver {
> + uint8_t ver;
> + uint16_t company_id;
> + uint16_t sub_ver;
> +} __attribute__ ((packed));
> +
> +struct amp_country_triplet {
> + union {
> + struct {
> + uint8_t first_channel;
> + uint8_t num_channels;
> + int8_t max_power;
> + } __attribute__ ((packed)) chans;
> + struct {
> + uint8_t reg_extension_id;
> + uint8_t reg_class;
> + uint8_t coverage_class;
> + } __attribute__ ((packed)) ext;
> + };
> +} __attribute__ ((packed));
> +
> +struct amp_chan_list {
> + uint8_t country_code[3];
> + struct amp_country_triplet triplets[0];
> +} __attribute__ ((packed));
> +
> +#define AMP_COMMAND_NOT_RECOGNIZED 0x0000
> +
> +/* AMP controller status */
> +#define AMP_CT_POWERED_DOWN 0x00
> +#define AMP_CT_BLUETOOTH_ONLY 0x01
> +#define AMP_CT_NO_CAPACITY 0x02
> +#define AMP_CT_LOW_CAPACITY 0x03
> +#define AMP_CT_MEDIUM_CAPACITY 0x04
> +#define AMP_CT_HIGH_CAPACITY 0x05
> +#define AMP_CT_FULL_CAPACITY 0x06
> +
> +/* AMP response status */
> +#define AMP_STATUS_SUCCESS 0x00
> +#define AMP_STATUS_INVALID_CTRL_ID 0x01
> +#define AMP_STATUS_UNABLE_START_LINK_CREATION 0x02
> +#define AMP_STATUS_NO_PHYSICAL_LINK_EXISTS 0x02
> +#define AMP_STATUS_COLLISION_OCCURED 0x03
> +#define AMP_STATUS_DISCONN_REQ_RECVD 0x04
> +#define AMP_STATUS_PHYS_LINK_EXISTS 0x05
> +#define AMP_STATUS_SECURITY_VIOLATION 0x06
> +
> +void amp_assoc_dump(int level, uint8_t *assoc, uint16_t len);
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* __AMP_H */
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-06-14 7:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-05 9:09 [PATCHv2 hcidump 1/4] Headers for AMP ASSOC dump functions Andrei Emeltchenko
2012-06-05 9:09 ` [PATCHv2 hcidump 2/4] Fix number of triplet calculation Andrei Emeltchenko
2012-06-05 9:09 ` [PATCHv2 hcidump 3/4] Make assoc dump function available for HCI parser Andrei Emeltchenko
2012-06-05 9:09 ` [PATCHv2 hcidump 4/4] Add decoding AMP Assoc data in " Andrei Emeltchenko
2012-06-14 7:25 ` Andrei Emeltchenko [this message]
2012-06-26 12:02 ` [PATCHv2 hcidump 1/4] Headers for AMP ASSOC dump functions Andrei Emeltchenko
2012-06-28 13:09 ` [PATCHv3 hcidump 1/4] lib: Add headers for AMP ASSOC data Andrei Emeltchenko
2012-06-28 13:09 ` [PATCHv3 hcidump 2/4] a2mp: Fix number of triplet calculation Andrei Emeltchenko
2012-06-28 13:09 ` [PATCHv3 hcidump 3/4] a2mp: Make assoc dump function available for HCI parser Andrei Emeltchenko
2012-06-28 13:09 ` [PATCHv3 hcidump 4/4] amp: Add decoding AMP Assoc data in " Andrei Emeltchenko
2012-06-28 13:19 ` [PATCHv3 hcidump 1/4] lib: Add headers for AMP ASSOC data Johan Hedberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120614072512.GB24061@aemeltch-MOBL1 \
--to=andrei.emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox