* [PATCHv5 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
` (17 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo
Cc: sunnyk, marcel, andrei.emeltchenko.news, Andrei Emeltchenko
An L2CAP channel using high speed continues to be associated with a
BR/EDR l2cap_conn, while also tracking an additional hci_conn
(representing a physical link on a high speed controller) and hci_chan
(representing a logical link). There may only be one physical link
between two high speed controllers. Each physical link may contain
several logical links, with each logical link representing a channel
with specific quality of service.
During a channel move, the destination channel id, current move state,
and role (initiator vs. responder) are tracked and used by the channel
move state machine. The ident value associated with a move request
must also be stored in order to use it in later move responses.
The active channel is stored in local_amp_id.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
include/net/bluetooth/l2cap.h | 29 +++++++++++++++++++++++++++++
net/bluetooth/l2cap_core.c | 5 +++++
2 files changed, 34 insertions(+)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 6e23afd..6d3615e 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -434,6 +434,8 @@ struct l2cap_chan {
struct sock *sk;
struct l2cap_conn *conn;
+ struct hci_conn *hs_hcon;
+ struct hci_chan *hs_hchan;
struct kref kref;
__u8 state;
@@ -477,6 +479,11 @@ struct l2cap_chan {
unsigned long conn_state;
unsigned long flags;
+ __u8 local_amp_id;
+ __u8 move_id;
+ __u8 move_state;
+ __u8 move_role;
+
__u16 next_tx_seq;
__u16 expected_ack_seq;
__u16 expected_tx_seq;
@@ -644,6 +651,9 @@ enum {
enum {
L2CAP_RX_STATE_RECV,
L2CAP_RX_STATE_SREJ_SENT,
+ L2CAP_RX_STATE_MOVE,
+ L2CAP_RX_STATE_WAIT_P,
+ L2CAP_RX_STATE_WAIT_F,
};
enum {
@@ -674,6 +684,25 @@ enum {
L2CAP_EV_RECV_FRAME,
};
+enum {
+ L2CAP_MOVE_ROLE_NONE,
+ L2CAP_MOVE_ROLE_INITIATOR,
+ L2CAP_MOVE_ROLE_RESPONDER,
+};
+
+enum {
+ L2CAP_MOVE_STABLE,
+ L2CAP_MOVE_WAIT_REQ,
+ L2CAP_MOVE_WAIT_RSP,
+ L2CAP_MOVE_WAIT_RSP_SUCCESS,
+ L2CAP_MOVE_WAIT_CONFIRM,
+ L2CAP_MOVE_WAIT_CONFIRM_RSP,
+ L2CAP_MOVE_WAIT_LOGICAL_COMP,
+ L2CAP_MOVE_WAIT_LOGICAL_CFM,
+ L2CAP_MOVE_WAIT_LOCAL_BUSY,
+ L2CAP_MOVE_WAIT_PREPARE,
+};
+
void l2cap_chan_hold(struct l2cap_chan *c);
void l2cap_chan_put(struct l2cap_chan *c);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 08efc25..c1b169f 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2788,6 +2788,11 @@ int l2cap_ertm_init(struct l2cap_chan *chan)
skb_queue_head_init(&chan->tx_q);
+ chan->local_amp_id = 0;
+ chan->move_id = 0;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+
if (chan->mode != L2CAP_MODE_ERTM)
return 0;
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 02/18] Bluetooth: Add L2CAP create channel request handling
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-23 22:24 ` [PATCHv5 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
` (16 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo
Cc: sunnyk, marcel, andrei.emeltchenko.news, Andrei Emeltchenko
The L2CAP create channel request is very similar to an L2CAP connect
request, but it has an additional parameter for the controller ID. If
the controller id is 0, the channel is set up on the BR/EDR controller
(just like a connect request). Using a valid high speed controller ID
will cause the channel to be initially created on that high speed
controller. While the L2CAP data will be initially routed over the
AMP controller, the L2CAP fixed signaling channel only uses BR/EDR.
When a create channel request is received for a high speed controller,
a pending response is always sent first. After the high speed
physical and logical links are complete a success response will be
sent.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
net/bluetooth/l2cap_core.c | 63 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 48 insertions(+), 15 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index c1b169f..2b3eef7 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3400,8 +3400,9 @@ static inline int l2cap_command_rej(struct l2cap_conn *conn,
return 0;
}
-static void l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd,
- u8 *data, u8 rsp_code, u8 amp_id)
+static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd,
+ u8 *data, u8 rsp_code, u8 amp_id)
{
struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
struct l2cap_conn_rsp rsp;
@@ -3452,6 +3453,7 @@ static void l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd,
bacpy(&bt_sk(sk)->dst, conn->dst);
chan->psm = psm;
chan->dcid = scid;
+ chan->local_amp_id = amp_id;
__l2cap_chan_add(conn, chan);
@@ -3469,8 +3471,17 @@ static void l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd,
status = L2CAP_CS_AUTHOR_PEND;
chan->ops->defer(chan);
} else {
- __l2cap_state_change(chan, BT_CONFIG);
- result = L2CAP_CR_SUCCESS;
+ /* Force pending result for AMP controllers.
+ * The connection will succeed after the
+ * physical link is up.
+ */
+ if (amp_id) {
+ __l2cap_state_change(chan, BT_CONNECT2);
+ result = L2CAP_CR_PEND;
+ } else {
+ __l2cap_state_change(chan, BT_CONFIG);
+ result = L2CAP_CR_SUCCESS;
+ }
status = L2CAP_CS_NO_INFO;
}
} else {
@@ -3516,6 +3527,8 @@ sendresp:
l2cap_build_conf_req(chan, buf), buf);
chan->num_conf_req++;
}
+
+ return chan;
}
static int l2cap_connect_req(struct l2cap_conn *conn,
@@ -4028,12 +4041,12 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn,
return 0;
}
-static inline int l2cap_create_channel_req(struct l2cap_conn *conn,
- struct l2cap_cmd_hdr *cmd,
- u16 cmd_len, void *data)
+static int l2cap_create_channel_req(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd,
+ u16 cmd_len, void *data)
{
struct l2cap_create_chan_req *req = data;
- struct l2cap_create_chan_rsp rsp;
+ struct l2cap_chan *chan;
u16 psm, scid;
if (cmd_len != sizeof(*req))
@@ -4047,14 +4060,34 @@ static inline int l2cap_create_channel_req(struct l2cap_conn *conn,
BT_DBG("psm 0x%2.2x, scid 0x%4.4x, amp_id %d", psm, scid, req->amp_id);
- /* Placeholder: Always reject */
- rsp.dcid = 0;
- rsp.scid = cpu_to_le16(scid);
- rsp.result = __constant_cpu_to_le16(L2CAP_CR_NO_MEM);
- rsp.status = __constant_cpu_to_le16(L2CAP_CS_NO_INFO);
+ if (req->amp_id) {
+ struct hci_dev *hdev;
- l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP,
- sizeof(rsp), &rsp);
+ /* Validate AMP controller id */
+ hdev = hci_dev_get(req->amp_id);
+ if (!hdev || hdev->dev_type != HCI_AMP ||
+ !test_bit(HCI_UP, &hdev->flags)) {
+ struct l2cap_create_chan_rsp rsp;
+
+ rsp.dcid = 0;
+ rsp.scid = cpu_to_le16(scid);
+ rsp.result = __constant_cpu_to_le16(L2CAP_CR_BAD_AMP);
+ rsp.status = __constant_cpu_to_le16(L2CAP_CS_NO_INFO);
+
+ l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP,
+ sizeof(rsp), &rsp);
+
+ if (hdev)
+ hci_dev_put(hdev);
+
+ return 0;
+ }
+
+ hci_dev_put(hdev);
+ }
+
+ chan = l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP,
+ req->amp_id);
return 0;
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 03/18] Bluetooth: Remove unnecessary intermediate function
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-23 22:24 ` [PATCHv5 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-23 22:24 ` [PATCHv5 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
` (15 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Resolves a conflict resolution issue in "Bluetooth: Fix L2CAP coding
style". The remaining connect and create channel response handler is
renamed to better reflect its use for both response types.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 2b3eef7..3175094 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3538,7 +3538,7 @@ static int l2cap_connect_req(struct l2cap_conn *conn,
return 0;
}
-static inline int l2cap_connect_rsp(struct l2cap_conn *conn,
+static int l2cap_connect_create_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u8 *data)
{
struct l2cap_conn_rsp *rsp = (struct l2cap_conn_rsp *) data;
@@ -4092,15 +4092,6 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,
return 0;
}
-static inline int l2cap_create_channel_rsp(struct l2cap_conn *conn,
- struct l2cap_cmd_hdr *cmd,
- void *data)
-{
- BT_DBG("conn %p", conn);
-
- return l2cap_connect_rsp(conn, cmd, data);
-}
-
static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
u16 icid, u16 result)
{
@@ -4307,7 +4298,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn,
case L2CAP_CONN_RSP:
case L2CAP_CREATE_CHAN_RSP:
- err = l2cap_connect_rsp(conn, cmd, data);
+ err = l2cap_connect_create_rsp(conn, cmd, data);
break;
case L2CAP_CONF_REQ:
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 04/18] Bluetooth: Lookup channel structure based on DCID
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (2 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 05/18] Bluetooth: Channel move request handling Mat Martineau
` (14 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Processing a move channel request involves getting the channel
structure using the destination channel ID. Previous code could only
look up using the source channel ID.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 3175094..03daae8 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -100,6 +100,23 @@ static struct l2cap_chan *l2cap_get_chan_by_scid(struct l2cap_conn *conn,
return c;
}
+/* Find channel with given DCID.
+ * Returns locked channel.
+ */
+static struct l2cap_chan *l2cap_get_chan_by_dcid(struct l2cap_conn *conn,
+ u16 cid)
+{
+ struct l2cap_chan *c;
+
+ mutex_lock(&conn->chan_lock);
+ c = __l2cap_get_chan_by_dcid(conn, cid);
+ if (c)
+ l2cap_chan_lock(c);
+ mutex_unlock(&conn->chan_lock);
+
+ return c;
+}
+
static struct l2cap_chan *__l2cap_get_chan_by_ident(struct l2cap_conn *conn,
u8 ident)
{
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 05/18] Bluetooth: Channel move request handling
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (3 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
` (13 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
On receipt of a channel move request, the request must be validated
based on the L2CAP mode, connection state, and controller
capabilities. ERTM channels must have their state machines cleared
and transmission paused while the channel move takes place.
If the channel is being moved to an AMP controller then
an AMP physical link must be prepared. Moving the channel back to
BR/EDR proceeds immediately.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 113 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 112 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 03daae8..24729f5 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -735,6 +735,12 @@ static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
hci_send_acl(conn->hchan, skb, flags);
}
+static bool __chan_is_moving(struct l2cap_chan *chan)
+{
+ return chan->move_state != L2CAP_MOVE_STABLE &&
+ chan->move_state != L2CAP_MOVE_WAIT_PREPARE;
+}
+
static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
{
struct hci_conn *hcon = chan->conn->hcon;
@@ -996,6 +1002,41 @@ void l2cap_send_conn_req(struct l2cap_chan *chan)
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
}
+static void l2cap_move_setup(struct l2cap_chan *chan)
+{
+ struct sk_buff *skb;
+
+ BT_DBG("chan %p", chan);
+
+ if (chan->mode != L2CAP_MODE_ERTM)
+ return;
+
+ __clear_retrans_timer(chan);
+ __clear_monitor_timer(chan);
+ __clear_ack_timer(chan);
+
+ chan->retry_count = 0;
+ skb_queue_walk(&chan->tx_q, skb) {
+ if (bt_cb(skb)->control.retries)
+ bt_cb(skb)->control.retries = 1;
+ else
+ break;
+ }
+
+ chan->expected_tx_seq = chan->buffer_seq;
+
+ clear_bit(CONN_REJ_ACT, &chan->conn_state);
+ clear_bit(CONN_SREJ_ACT, &chan->conn_state);
+ l2cap_seq_list_clear(&chan->retrans_list);
+ l2cap_seq_list_clear(&chan->srej_list);
+ skb_queue_purge(&chan->srej_q);
+
+ chan->tx_state = L2CAP_TX_STATE_XMIT;
+ chan->rx_state = L2CAP_RX_STATE_MOVE;
+
+ set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
+}
+
static void l2cap_chan_ready(struct l2cap_chan *chan)
{
/* This clears all conf flags, including CONF_NOT_COMPLETE */
@@ -4157,6 +4198,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_req *req = data;
+ struct l2cap_chan *chan;
u16 icid = 0;
u16 result = L2CAP_MR_NOT_ALLOWED;
@@ -4170,9 +4212,78 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
if (!enable_hs)
return -EINVAL;
- /* Placeholder: Always refuse */
+ chan = l2cap_get_chan_by_dcid(conn, icid);
+ if (!chan) {
+ l2cap_send_move_chan_rsp(conn, cmd->ident, icid,
+ L2CAP_MR_NOT_ALLOWED);
+ return 0;
+ }
+
+ if (chan->scid < L2CAP_CID_DYN_START ||
+ chan->chan_policy == BT_CHANNEL_POLICY_BREDR_ONLY ||
+ (chan->mode != L2CAP_MODE_ERTM &&
+ chan->mode != L2CAP_MODE_STREAMING)) {
+ result = L2CAP_MR_NOT_ALLOWED;
+ goto send_move_response;
+ }
+
+ if (chan->local_amp_id == req->dest_amp_id) {
+ result = L2CAP_MR_SAME_ID;
+ goto send_move_response;
+ }
+
+ if (req->dest_amp_id) {
+ struct hci_dev *hdev;
+ hdev = hci_dev_get(req->dest_amp_id);
+ if (!hdev || hdev->dev_type != HCI_AMP ||
+ !test_bit(HCI_UP, &hdev->flags)) {
+ if (hdev)
+ hci_dev_put(hdev);
+
+ result = L2CAP_MR_BAD_ID;
+ goto send_move_response;
+ }
+ hci_dev_put(hdev);
+ }
+
+ /* Detect a move collision. Only send a collision response
+ * if this side has "lost", otherwise proceed with the move.
+ * The winner has the larger bd_addr.
+ */
+ if ((__chan_is_moving(chan) ||
+ chan->move_role != L2CAP_MOVE_ROLE_NONE) &&
+ bacmp(conn->src, conn->dst) > 0) {
+ result = L2CAP_MR_COLLISION;
+ goto send_move_response;
+ }
+
+ chan->ident = cmd->ident;
+ chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
+ l2cap_move_setup(chan);
+ chan->move_id = req->dest_amp_id;
+ icid = chan->dcid;
+
+ if (!req->dest_amp_id) {
+ /* Moving to BR/EDR */
+ if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
+ chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+ result = L2CAP_MR_PEND;
+ } else {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+ result = L2CAP_MR_SUCCESS;
+ }
+ } else {
+ chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
+ /* Placeholder - uncomment when amp functions are available */
+ /*amp_accept_physical(chan, req->dest_amp_id);*/
+ result = L2CAP_MR_PEND;
+ }
+
+send_move_response:
l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
+ l2cap_chan_unlock(chan);
+
return 0;
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 06/18] Bluetooth: Add new ERTM receive states for channel move
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (4 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 05/18] Bluetooth: Channel move request handling Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 07/18] Bluetooth: Add move channel confirm handling Mat Martineau
` (12 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Two new states are required to implement channel moves with the ERTM
receive state machine.
The "WAIT_P" state is used by a move responder to wait for a "poll"
flag after a move is completed (success or failure). "WAIT_F" is
similarly used by a move initiator to wait for a "final" flag when the
move is completing. In either state, the reqseq value in the
poll/final frame tells the state machine exactly which frame should be
expected next.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 102 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 24729f5..b9a91bf 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4713,6 +4713,12 @@ static int l2cap_reassemble_sdu(struct l2cap_chan *chan, struct sk_buff *skb,
return err;
}
+static int l2cap_resegment(struct l2cap_chan *chan)
+{
+ /* Placeholder */
+ return 0;
+}
+
void l2cap_chan_busy(struct l2cap_chan *chan, int busy)
{
u8 event;
@@ -5218,6 +5224,96 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan,
return err;
}
+static int l2cap_finish_move(struct l2cap_chan *chan)
+{
+ BT_DBG("chan %p", chan);
+
+ chan->rx_state = L2CAP_RX_STATE_RECV;
+
+ if (chan->hs_hcon)
+ chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
+ else
+ chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
+
+ return l2cap_resegment(chan);
+}
+
+static int l2cap_rx_state_wait_p(struct l2cap_chan *chan,
+ struct l2cap_ctrl *control,
+ struct sk_buff *skb, u8 event)
+{
+ int err;
+
+ BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb,
+ event);
+
+ if (!control->poll)
+ return -EPROTO;
+
+ l2cap_process_reqseq(chan, control->reqseq);
+
+ if (!skb_queue_empty(&chan->tx_q))
+ chan->tx_send_head = skb_peek(&chan->tx_q);
+ else
+ chan->tx_send_head = NULL;
+
+ /* Rewind next_tx_seq to the point expected
+ * by the receiver.
+ */
+ chan->next_tx_seq = control->reqseq;
+ chan->unacked_frames = 0;
+
+ err = l2cap_finish_move(chan);
+ if (err)
+ return err;
+
+ set_bit(CONN_SEND_FBIT, &chan->conn_state);
+ l2cap_send_i_or_rr_or_rnr(chan);
+
+ if (event == L2CAP_EV_RECV_IFRAME)
+ return -EPROTO;
+
+ return l2cap_rx_state_recv(chan, control, NULL, event);
+}
+
+static int l2cap_rx_state_wait_f(struct l2cap_chan *chan,
+ struct l2cap_ctrl *control,
+ struct sk_buff *skb, u8 event)
+{
+ int err;
+
+ if (!control->final)
+ return -EPROTO;
+
+ clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
+
+ chan->rx_state = L2CAP_RX_STATE_RECV;
+ l2cap_process_reqseq(chan, control->reqseq);
+
+ if (!skb_queue_empty(&chan->tx_q))
+ chan->tx_send_head = skb_peek(&chan->tx_q);
+ else
+ chan->tx_send_head = NULL;
+
+ /* Rewind next_tx_seq to the point expected
+ * by the receiver.
+ */
+ chan->next_tx_seq = control->reqseq;
+ chan->unacked_frames = 0;
+
+ if (chan->hs_hcon)
+ chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
+ else
+ chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
+
+ err = l2cap_resegment(chan);
+
+ if (!err)
+ err = l2cap_rx_state_recv(chan, control, skb, event);
+
+ return err;
+}
+
static bool __valid_reqseq(struct l2cap_chan *chan, u16 reqseq)
{
/* Make sure reqseq is for a packet that has been sent but not acked */
@@ -5244,6 +5340,12 @@ static int l2cap_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
err = l2cap_rx_state_srej_sent(chan, control, skb,
event);
break;
+ case L2CAP_RX_STATE_WAIT_P:
+ err = l2cap_rx_state_wait_p(chan, control, skb, event);
+ break;
+ case L2CAP_RX_STATE_WAIT_F:
+ err = l2cap_rx_state_wait_f(chan, control, skb, event);
+ break;
default:
/* shut it down */
break;
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 07/18] Bluetooth: Add move channel confirm handling
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (5 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 08/18] Bluetooth: Add state to hci_chan Mat Martineau
` (11 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
After sending a move channel response, a move responder waits for a
move channel confirm command. If the received command has a
"confirmed" result the move is proceeding, and "unconfirmed" means the
move has failed and the channel will not change controllers.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
net/bluetooth/l2cap_core.c | 58 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 55 insertions(+), 3 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b9a91bf..fef0394 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1037,6 +1037,28 @@ static void l2cap_move_setup(struct l2cap_chan *chan)
set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
}
+static void l2cap_move_done(struct l2cap_chan *chan)
+{
+ u8 move_role = chan->move_role;
+ BT_DBG("chan %p", chan);
+
+ chan->move_state = L2CAP_MOVE_STABLE;
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+
+ if (chan->mode != L2CAP_MODE_ERTM)
+ return;
+
+ switch (move_role) {
+ case L2CAP_MOVE_ROLE_INITIATOR:
+ l2cap_tx(chan, NULL, NULL, L2CAP_EV_EXPLICIT_POLL);
+ chan->rx_state = L2CAP_RX_STATE_WAIT_F;
+ break;
+ case L2CAP_MOVE_ROLE_RESPONDER:
+ chan->rx_state = L2CAP_RX_STATE_WAIT_P;
+ break;
+ }
+}
+
static void l2cap_chan_ready(struct l2cap_chan *chan)
{
/* This clears all conf flags, including CONF_NOT_COMPLETE */
@@ -4193,6 +4215,14 @@ static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM_RSP, sizeof(rsp), &rsp);
}
+static void __release_logical_link(struct l2cap_chan *chan)
+{
+ chan->hs_hchan = NULL;
+ chan->hs_hcon = NULL;
+
+ /* Placeholder - release the logical link */
+}
+
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
@@ -4308,11 +4338,12 @@ static inline int l2cap_move_channel_rsp(struct l2cap_conn *conn,
return 0;
}
-static inline int l2cap_move_channel_confirm(struct l2cap_conn *conn,
- struct l2cap_cmd_hdr *cmd,
- u16 cmd_len, void *data)
+static int l2cap_move_channel_confirm(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd,
+ u16 cmd_len, void *data)
{
struct l2cap_move_chan_cfm *cfm = data;
+ struct l2cap_chan *chan;
u16 icid, result;
if (cmd_len != sizeof(*cfm))
@@ -4323,8 +4354,29 @@ static inline int l2cap_move_channel_confirm(struct l2cap_conn *conn,
BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
+ chan = l2cap_get_chan_by_dcid(conn, icid);
+ if (!chan) {
+ /* Spec requires a response even if the icid was not found */
+ l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
+ return 0;
+ }
+
+ if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM) {
+ if (result == L2CAP_MC_CONFIRMED) {
+ chan->local_amp_id = chan->move_id;
+ if (!chan->local_amp_id)
+ __release_logical_link(chan);
+ } else {
+ chan->move_id = chan->local_amp_id;
+ }
+
+ l2cap_move_done(chan);
+ }
+
l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
+ l2cap_chan_unlock(chan);
+
return 0;
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 08/18] Bluetooth: Add state to hci_chan
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (6 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 07/18] Bluetooth: Add move channel confirm handling Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 09/18] Bluetooth: Move channel response Mat Martineau
` (10 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
On an AMP controller, hci_chan maps to a logical link. When a channel
is being moved, the logical link may or may not be connected already.
The hci_chan->state is used to determine the existance of a useable
logical link so the link can be either used or requested.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_conn.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 9fe8e2d..00abc52 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -355,6 +355,7 @@ struct hci_chan {
struct hci_conn *conn;
struct sk_buff_head data_q;
unsigned int sent;
+ __u8 state;
};
extern struct list_head hci_dev_list;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index fe64621..6dcf452 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -959,6 +959,7 @@ struct hci_chan *hci_chan_create(struct hci_conn *conn)
chan->conn = conn;
skb_queue_head_init(&chan->data_q);
+ chan->state = BT_CONNECTED;
list_add_rcu(&chan->list, &conn->chan_list);
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 09/18] Bluetooth: Move channel response
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (7 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 08/18] Bluetooth: Add state to hci_chan Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 10/18] Bluetooth: Add logical link confirm Mat Martineau
` (9 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
The move response command includes a result code indicationg
"pending", "success", or "failure" status. A pending result is
received when the remote address is still setting up a physical link,
and will be followed by success or failure. On success, logical link
setup will proceed. On failure, the move is stopped. The receiver of
a move channel response must always follow up by sending a move
channel confirm command.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
include/net/bluetooth/l2cap.h | 2 +
net/bluetooth/l2cap_core.c | 183 ++++++++++++++++++++++++++++++++++++++----
2 files changed, 170 insertions(+), 15 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 6d3615e..b4c3c65 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -52,6 +52,8 @@
#define L2CAP_ENC_TIMEOUT msecs_to_jiffies(5000)
#define L2CAP_CONN_TIMEOUT msecs_to_jiffies(40000)
#define L2CAP_INFO_TIMEOUT msecs_to_jiffies(4000)
+#define L2CAP_MOVE_TIMEOUT msecs_to_jiffies(4000)
+#define L2CAP_MOVE_ERTX_TIMEOUT msecs_to_jiffies(60000)
#define L2CAP_A2MP_DEFAULT_MTU 670
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index fef0394..2277ed5 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -129,6 +129,20 @@ static struct l2cap_chan *__l2cap_get_chan_by_ident(struct l2cap_conn *conn,
return NULL;
}
+static struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn,
+ u8 ident)
+{
+ struct l2cap_chan *c;
+
+ mutex_lock(&conn->chan_lock);
+ c = __l2cap_get_chan_by_ident(conn, ident);
+ if (c)
+ l2cap_chan_lock(c);
+ mutex_unlock(&conn->chan_lock);
+
+ return c;
+}
+
static struct l2cap_chan *__l2cap_global_chan_by_addr(__le16 psm, bdaddr_t *src)
{
struct l2cap_chan *c;
@@ -4185,23 +4199,34 @@ static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_RSP, sizeof(rsp), &rsp);
}
-static void l2cap_send_move_chan_cfm(struct l2cap_conn *conn,
- struct l2cap_chan *chan,
- u16 icid, u16 result)
+static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_cfm cfm;
- u8 ident;
- BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
+ BT_DBG("chan %p, result 0x%4.4x", chan, result);
- ident = l2cap_get_ident(conn);
- if (chan)
- chan->ident = ident;
+ chan->ident = l2cap_get_ident(chan->conn);
- cfm.icid = cpu_to_le16(icid);
+ cfm.icid = cpu_to_le16(chan->scid);
cfm.result = cpu_to_le16(result);
- l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM, sizeof(cfm), &cfm);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_CFM,
+ sizeof(cfm), &cfm);
+
+ __set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
+}
+
+static void l2cap_send_move_chan_cfm_icid(struct l2cap_conn *conn, u16 icid)
+{
+ struct l2cap_move_chan_cfm cfm;
+
+ BT_DBG("conn %p, icid 0x%4.4x", conn, icid);
+
+ cfm.icid = cpu_to_le16(icid);
+ cfm.result = __constant_cpu_to_le16(L2CAP_MC_UNCONFIRMED);
+
+ l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_MOVE_CHAN_CFM,
+ sizeof(cfm), &cfm);
}
static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
@@ -4223,6 +4248,13 @@ static void __release_logical_link(struct l2cap_chan *chan)
/* Placeholder - release the logical link */
}
+static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
+ u8 status)
+{
+ /* Placeholder */
+ return;
+}
+
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
@@ -4317,9 +4349,128 @@ send_move_response:
return 0;
}
-static inline int l2cap_move_channel_rsp(struct l2cap_conn *conn,
- struct l2cap_cmd_hdr *cmd,
- u16 cmd_len, void *data)
+static void l2cap_move_continue(struct l2cap_conn *conn, u16 icid, u16 result)
+{
+ struct l2cap_chan *chan;
+ struct hci_chan *hchan = NULL;
+
+ chan = l2cap_get_chan_by_scid(conn, icid);
+ if (!chan) {
+ l2cap_send_move_chan_cfm_icid(conn, icid);
+ return;
+ }
+
+ __clear_chan_timer(chan);
+ if (result == L2CAP_MR_PEND)
+ __set_chan_timer(chan, L2CAP_MOVE_ERTX_TIMEOUT);
+
+ switch (chan->move_state) {
+ case L2CAP_MOVE_WAIT_LOGICAL_COMP:
+ /* Move confirm will be sent when logical link
+ * is complete.
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
+ break;
+ case L2CAP_MOVE_WAIT_RSP_SUCCESS:
+ if (result == L2CAP_MR_PEND) {
+ break;
+ } else if (test_bit(CONN_LOCAL_BUSY,
+ &chan->conn_state)) {
+ chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+ } else {
+ /* Logical link is up or moving to BR/EDR,
+ * proceed with move
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
+ }
+ break;
+ case L2CAP_MOVE_WAIT_RSP:
+ /* Moving to AMP */
+ if (result == L2CAP_MR_SUCCESS) {
+ /* Remote is ready, send confirm immediately
+ * after logical link is ready
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
+ } else {
+ /* Both logical link and move success
+ * are required to confirm
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_COMP;
+ }
+
+ /* Placeholder - get hci_chan for logical link */
+ if (!hchan) {
+ /* Logical link not available */
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
+ break;
+ }
+
+ /* If the logical link is not yet connected, do not
+ * send confirmation.
+ */
+ if (hchan->state != BT_CONNECTED)
+ break;
+
+ /* Logical link is already ready to go */
+
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ if (result == L2CAP_MR_SUCCESS) {
+ /* Can confirm now */
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
+ } else {
+ /* Now only need move success
+ * to confirm
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
+ }
+
+ l2cap_logical_cfm(chan, hchan, L2CAP_MR_SUCCESS);
+ break;
+ default:
+ /* Any other amp move state means the move failed. */
+ chan->move_id = chan->local_amp_id;
+ l2cap_move_done(chan);
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
+ }
+
+ l2cap_chan_unlock(chan);
+}
+
+static void l2cap_move_fail(struct l2cap_conn *conn, u8 ident, u16 icid,
+ u16 result)
+{
+ struct l2cap_chan *chan;
+
+ chan = l2cap_get_chan_by_ident(conn, ident);
+ if (!chan) {
+ /* Could not locate channel, icid is best guess */
+ l2cap_send_move_chan_cfm_icid(conn, icid);
+ return;
+ }
+
+ __clear_chan_timer(chan);
+
+ if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ if (result == L2CAP_MR_COLLISION) {
+ chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
+ } else {
+ /* Cleanup - cancel move */
+ chan->move_id = chan->local_amp_id;
+ l2cap_move_done(chan);
+ }
+ }
+
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
+
+ l2cap_chan_unlock(chan);
+}
+
+static int l2cap_move_channel_rsp(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd,
+ u16 cmd_len, void *data)
{
struct l2cap_move_chan_rsp *rsp = data;
u16 icid, result;
@@ -4332,8 +4483,10 @@ static inline int l2cap_move_channel_rsp(struct l2cap_conn *conn,
BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
- /* Placeholder: Always unconfirmed */
- l2cap_send_move_chan_cfm(conn, NULL, icid, L2CAP_MC_UNCONFIRMED);
+ if (result == L2CAP_MR_SUCCESS || result == L2CAP_MR_PEND)
+ l2cap_move_continue(conn, icid, result);
+ else
+ l2cap_move_fail(conn, cmd->ident, icid, result);
return 0;
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 10/18] Bluetooth: Add logical link confirm
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (8 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 09/18] Bluetooth: Move channel response Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:36 ` Marcel Holtmann
2012-10-23 22:24 ` [PATCHv5 11/18] Bluetooth: Add move confirm response handling Mat Martineau
` (8 subsequent siblings)
18 siblings, 1 reply; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
The logical link confirm callback is executed when the AMP controller
completes its logical link setup. During a channel move, a newly
formed logical link allows a move responder to send a move channel
response. A move initiator will send a move channel confirm. A
failed logical link will end the channel move and send an appropriate
response or confirm command indicating a failure.
If the channel is being created on an AMP controller, L2CAP
configuration is completed after the logical link is set up.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap_core.c | 134 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 123 insertions(+), 11 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 2277ed5..4d240c2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3787,6 +3787,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
goto unlock;
}
+ chan->ident = cmd->ident;
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
chan->num_conf_rsp++;
@@ -4186,17 +4187,17 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,
return 0;
}
-static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
- u16 icid, u16 result)
+static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_rsp rsp;
- BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
+ BT_DBG("chan %p, result 0x%4.4x", chan, result);
- rsp.icid = cpu_to_le16(icid);
+ rsp.icid = cpu_to_le16(chan->dcid);
rsp.result = cpu_to_le16(result);
- l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_RSP, sizeof(rsp), &rsp);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_RSP,
+ sizeof(rsp), &rsp);
}
static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
@@ -4248,11 +4249,118 @@ static void __release_logical_link(struct l2cap_chan *chan)
/* Placeholder - release the logical link */
}
+static void l2cap_logical_fail(struct l2cap_chan *chan)
+{
+ /* Logical link setup failed */
+ if (chan->state != BT_CONNECTED) {
+ /* Create channel failure, disconnect */
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
+ return;
+ }
+
+ switch (chan->move_role) {
+ case L2CAP_MOVE_ROLE_RESPONDER:
+ l2cap_move_done(chan);
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_SUPP);
+ break;
+ case L2CAP_MOVE_ROLE_INITIATOR:
+ if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
+ chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
+ /* Remote has only sent pending or
+ * success responses, clean up
+ */
+ l2cap_move_done(chan);
+ }
+
+ /* Other amp move states imply that the move
+ * has already aborted
+ */
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
+ break;
+ }
+}
+
+static void l2cap_logical_finish_create(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ struct l2cap_conf_rsp rsp;
+ u8 code;
+
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ code = l2cap_build_conf_rsp(chan, &rsp,
+ L2CAP_CONF_SUCCESS, 0);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CONF_RSP, code,
+ &rsp);
+ set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
+
+ if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
+ int err = 0;
+
+ set_default_fcs(chan);
+
+ err = l2cap_ertm_init(chan);
+ if (err < 0)
+ l2cap_send_disconn_req(chan->conn, chan, -err);
+ else
+ l2cap_chan_ready(chan);
+ }
+}
+
+static void l2cap_logical_finish_move(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ BT_DBG("move_state %d", chan->move_state);
+
+ switch (chan->move_state) {
+ case L2CAP_MOVE_WAIT_LOGICAL_COMP:
+ /* Move confirm will be sent after a success
+ * response is received
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
+ break;
+ case L2CAP_MOVE_WAIT_LOGICAL_CFM:
+ if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
+ chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
+ }
+ break;
+ default:
+ /* Move was not in expected state, free the channel */
+ __release_logical_link(chan);
+
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+}
+
+/* Call with chan locked */
static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
u8 status)
{
- /* Placeholder */
- return;
+ BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
+
+ if (status) {
+ l2cap_logical_fail(chan);
+ __release_logical_link(chan);
+ return;
+ }
+
+ if (chan->state != BT_CONNECTED) {
+ /* Ignore logical link if channel is on BR/EDR */
+ if (chan->local_amp_id)
+ l2cap_logical_finish_create(chan, hchan);
+ } else {
+ l2cap_logical_finish_move(chan, hchan);
+ }
}
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
@@ -4260,6 +4368,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_req *req = data;
+ struct l2cap_move_chan_rsp rsp;
struct l2cap_chan *chan;
u16 icid = 0;
u16 result = L2CAP_MR_NOT_ALLOWED;
@@ -4276,11 +4385,15 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
chan = l2cap_get_chan_by_dcid(conn, icid);
if (!chan) {
- l2cap_send_move_chan_rsp(conn, cmd->ident, icid,
- L2CAP_MR_NOT_ALLOWED);
+ rsp.icid = cpu_to_le16(icid);
+ rsp.result = __constant_cpu_to_le16(L2CAP_MR_NOT_ALLOWED);
+ l2cap_send_cmd(conn, cmd->ident, L2CAP_MOVE_CHAN_RSP,
+ sizeof(rsp), &rsp);
return 0;
}
+ chan->ident = cmd->ident;
+
if (chan->scid < L2CAP_CID_DYN_START ||
chan->chan_policy == BT_CHANNEL_POLICY_BREDR_ONLY ||
(chan->mode != L2CAP_MODE_ERTM &&
@@ -4319,7 +4432,6 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
goto send_move_response;
}
- chan->ident = cmd->ident;
chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
l2cap_move_setup(chan);
chan->move_id = req->dest_amp_id;
@@ -4342,7 +4454,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
}
send_move_response:
- l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
+ l2cap_send_move_chan_rsp(chan, result);
l2cap_chan_unlock(chan);
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCHv5 10/18] Bluetooth: Add logical link confirm
2012-10-23 22:24 ` [PATCHv5 10/18] Bluetooth: Add logical link confirm Mat Martineau
@ 2012-10-23 22:36 ` Marcel Holtmann
0 siblings, 0 replies; 23+ messages in thread
From: Marcel Holtmann @ 2012-10-23 22:36 UTC (permalink / raw)
To: Mat Martineau; +Cc: linux-bluetooth, gustavo, sunnyk, andrei.emeltchenko.news
Hi Mat,
> The logical link confirm callback is executed when the AMP controller
> completes its logical link setup. During a channel move, a newly
> formed logical link allows a move responder to send a move channel
> response. A move initiator will send a move channel confirm. A
> failed logical link will end the channel move and send an appropriate
> response or confirm command indicating a failure.
>
> If the channel is being created on an AMP controller, L2CAP
> configuration is completed after the logical link is set up.
>
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> ---
> net/bluetooth/l2cap_core.c | 134 +++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 123 insertions(+), 11 deletions(-)
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Regards
Marcel
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCHv5 11/18] Bluetooth: Add move confirm response handling
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (9 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 10/18] Bluetooth: Add logical link confirm Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 12/18] Bluetooth: Handle physical link completion Mat Martineau
` (7 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
The move confirm response concludes the channel move command sequence.
Receipt of this command indicates that data may begin to flow again.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 4d240c2..7663a1e 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4650,6 +4650,7 @@ static inline int l2cap_move_channel_confirm_rsp(struct l2cap_conn *conn,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_cfm_rsp *rsp = data;
+ struct l2cap_chan *chan;
u16 icid;
if (cmd_len != sizeof(*rsp))
@@ -4659,6 +4660,23 @@ static inline int l2cap_move_channel_confirm_rsp(struct l2cap_conn *conn,
BT_DBG("icid 0x%4.4x", icid);
+ chan = l2cap_get_chan_by_scid(conn, icid);
+ if (!chan)
+ return 0;
+
+ __clear_chan_timer(chan);
+
+ if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM_RSP) {
+ chan->local_amp_id = chan->move_id;
+
+ if (!chan->local_amp_id && chan->hs_hchan)
+ __release_logical_link(chan);
+
+ l2cap_move_done(chan);
+ }
+
+ l2cap_chan_unlock(chan);
+
return 0;
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 12/18] Bluetooth: Handle physical link completion
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (10 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 11/18] Bluetooth: Add move confirm response handling Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
` (6 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Several different actions may be taken when an AMP physical link
becomes available. A channel being created on an AMP controller must
continue the connection process. A channel being moved needs to
either send a move request or a move response. A failed physical link
will revert to using a BR/EDR controller if possible.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 164 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 164 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 7663a1e..898529d 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1016,6 +1016,19 @@ void l2cap_send_conn_req(struct l2cap_chan *chan)
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
}
+static void l2cap_send_create_chan_req(struct l2cap_chan *chan, u8 amp_id)
+{
+ struct l2cap_create_chan_req req;
+ req.scid = cpu_to_le16(chan->scid);
+ req.psm = chan->psm;
+ req.amp_id = amp_id;
+
+ chan->ident = l2cap_get_ident(chan->conn);
+
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CREATE_CHAN_REQ,
+ sizeof(req), &req);
+}
+
static void l2cap_move_setup(struct l2cap_chan *chan)
{
struct sk_buff *skb;
@@ -4187,6 +4200,25 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,
return 0;
}
+static void l2cap_send_move_chan_req(struct l2cap_chan *chan, u8 dest_amp_id)
+{
+ struct l2cap_move_chan_req req;
+ u8 ident;
+
+ BT_DBG("chan %p, dest_amp_id %d", chan, dest_amp_id);
+
+ ident = l2cap_get_ident(chan->conn);
+ chan->ident = ident;
+
+ req.icid = cpu_to_le16(chan->scid);
+ req.dest_amp_id = dest_amp_id;
+
+ l2cap_send_cmd(chan->conn, ident, L2CAP_MOVE_CHAN_REQ, sizeof(req),
+ &req);
+
+ __set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
+}
+
static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_rsp rsp;
@@ -4363,6 +4395,138 @@ static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
}
}
+static void l2cap_do_create(struct l2cap_chan *chan, int result,
+ u8 local_amp_id, u8 remote_amp_id)
+{
+ if (!test_bit(CONF_CONNECT_PEND, &chan->conf_state)) {
+ struct l2cap_conn_rsp rsp;
+ char buf[128];
+ rsp.scid = cpu_to_le16(chan->dcid);
+ rsp.dcid = cpu_to_le16(chan->scid);
+
+ /* Incoming channel on AMP */
+ if (result == L2CAP_CR_SUCCESS) {
+ /* Send successful response */
+ rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
+ } else {
+ /* Send negative response */
+ rsp.result = cpu_to_le16(L2CAP_CR_NO_MEM);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
+ }
+
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CREATE_CHAN_RSP,
+ sizeof(rsp), &rsp);
+
+ if (result == L2CAP_CR_SUCCESS) {
+ __l2cap_state_change(chan, BT_CONFIG);
+ set_bit(CONF_REQ_SENT, &chan->conf_state);
+ l2cap_send_cmd(chan->conn, l2cap_get_ident(chan->conn),
+ L2CAP_CONF_REQ,
+ l2cap_build_conf_req(chan, buf), buf);
+ chan->num_conf_req++;
+ }
+ } else {
+ /* Outgoing channel on AMP */
+ if (result == L2CAP_CR_SUCCESS) {
+ chan->local_amp_id = local_amp_id;
+ l2cap_send_create_chan_req(chan, remote_amp_id);
+ } else {
+ /* Revert to BR/EDR connect */
+ l2cap_send_conn_req(chan);
+ }
+ }
+}
+
+static void l2cap_do_move_initiate(struct l2cap_chan *chan, u8 local_amp_id,
+ u8 remote_amp_id)
+{
+ l2cap_move_setup(chan);
+ chan->move_id = local_amp_id;
+ chan->move_state = L2CAP_MOVE_WAIT_RSP;
+
+ l2cap_send_move_chan_req(chan, remote_amp_id);
+}
+
+static void l2cap_do_move_respond(struct l2cap_chan *chan, int result)
+{
+ struct hci_chan *hchan = NULL;
+
+ /* Placeholder - get hci_chan for logical link */
+
+ if (hchan) {
+ if (hchan->state == BT_CONNECTED) {
+ /* Logical link is ready to go */
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
+
+ l2cap_logical_cfm(chan, hchan, L2CAP_MR_SUCCESS);
+ } else {
+ /* Wait for logical link to be ready */
+ chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
+ }
+ } else {
+ /* Logical link not available */
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_ALLOWED);
+ }
+}
+
+static void l2cap_do_move_cancel(struct l2cap_chan *chan, int result)
+{
+ if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ u8 rsp_result;
+ if (result == -EINVAL)
+ rsp_result = L2CAP_MR_BAD_ID;
+ else
+ rsp_result = L2CAP_MR_NOT_ALLOWED;
+
+ l2cap_send_move_chan_rsp(chan, rsp_result);
+ }
+
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+
+ /* Restart data transmission */
+ l2cap_ertm_send(chan);
+}
+
+void l2cap_physical_cfm(struct l2cap_chan *chan, int result, u8 local_amp_id,
+ u8 remote_amp_id)
+{
+ BT_DBG("chan %p, result %d, local_amp_id %d, remote_amp_id %d",
+ chan, result, local_amp_id, remote_amp_id);
+
+ l2cap_chan_lock(chan);
+
+ if (chan->state == BT_DISCONN || chan->state == BT_CLOSED) {
+ l2cap_chan_unlock(chan);
+ return;
+ }
+
+ if (chan->state != BT_CONNECTED) {
+ l2cap_do_create(chan, result, local_amp_id, remote_amp_id);
+ } else if (result != L2CAP_MR_SUCCESS) {
+ l2cap_do_move_cancel(chan, result);
+ } else {
+ switch (chan->move_role) {
+ case L2CAP_MOVE_ROLE_INITIATOR:
+ l2cap_do_move_initiate(chan, local_amp_id,
+ remote_amp_id);
+ break;
+ case L2CAP_MOVE_ROLE_RESPONDER:
+ l2cap_do_move_respond(chan, result);
+ break;
+ default:
+ l2cap_do_move_cancel(chan, result);
+ break;
+ }
+ }
+
+ l2cap_chan_unlock(chan);
+}
+
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (11 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 12/18] Bluetooth: Handle physical link completion Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 14/18] Bluetooth: Do not send data during channel move Mat Martineau
` (5 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
AMP controllers expect to transmit only "complete" ACL frames. These
frames have both the "start" and "cont" bits set. AMP does not allow
fragmented ACLs.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 898529d..22f3768 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -763,6 +763,15 @@ static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
BT_DBG("chan %p, skb %p len %d priority %u", chan, skb, skb->len,
skb->priority);
+ if (chan->hs_hcon && !__chan_is_moving(chan)) {
+ if (chan->hs_hchan)
+ hci_send_acl(chan->hs_hchan, skb, ACL_COMPLETE);
+ else
+ kfree_skb(skb);
+
+ return;
+ }
+
if (!test_bit(FLAG_FLUSHABLE, &chan->flags) &&
lmp_no_flush_capable(hcon->hdev))
flags = ACL_START_NO_FLUSH;
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 14/18] Bluetooth: Do not send data during channel move
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (12 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
` (4 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Outgoing ERTM data is queued during a channel move. The ERTM state
machine is partially reset at the start of a move, and must be
resynchronized with the remote state machine at the end of the move.
Data is not sent so that there are no state transitions between the
partial reset and the resync.
Streaming mode frames are dropped during a move.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 22f3768..4eb3ca8 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -947,6 +947,9 @@ static void l2cap_send_sframe(struct l2cap_chan *chan,
if (!control->sframe)
return;
+ if (__chan_is_moving(chan))
+ return;
+
if (test_and_clear_bit(CONN_SEND_FBIT, &chan->conn_state) &&
!control->poll)
control->final = 1;
@@ -1811,6 +1814,9 @@ static void l2cap_streaming_send(struct l2cap_chan *chan,
BT_DBG("chan %p, skbs %p", chan, skbs);
+ if (__chan_is_moving(chan))
+ return;
+
skb_queue_splice_tail_init(skbs, &chan->tx_q);
while (!skb_queue_empty(&chan->tx_q)) {
@@ -1853,6 +1859,9 @@ static int l2cap_ertm_send(struct l2cap_chan *chan)
if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
return 0;
+ if (__chan_is_moving(chan))
+ return 0;
+
while (chan->tx_send_head &&
chan->unacked_frames < chan->remote_tx_win &&
chan->tx_state == L2CAP_TX_STATE_XMIT) {
@@ -1918,6 +1927,9 @@ static void l2cap_ertm_resend(struct l2cap_chan *chan)
if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
return;
+ if (__chan_is_moving(chan))
+ return;
+
while (chan->retrans_list.head != L2CAP_SEQ_LIST_CLEAR) {
seq = l2cap_seq_list_pop(&chan->retrans_list);
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (13 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 14/18] Bluetooth: Do not send data during channel move Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
` (3 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
The L2CAP spec recommends specific retransmit and monitor timeouts for
ERTM channels that are on AMP controllers. These timeouts are
calculated from the AMP controller's best effort flush timeout.
BR/EDR controllers use the default retransmit and monitor timeouts.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
net/bluetooth/l2cap_core.c | 47 ++++++++++++++++++++++++++++++++++++++++------
1 file changed, 41 insertions(+), 6 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 4eb3ca8..6662ee3 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2967,6 +2967,44 @@ static inline bool __l2cap_efs_supported(struct l2cap_chan *chan)
return enable_hs && chan->conn->feat_mask & L2CAP_FEAT_EXT_FLOW;
}
+static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan,
+ struct l2cap_conf_rfc *rfc)
+{
+ if (chan->local_amp_id && chan->hs_hcon) {
+ u64 ertm_to = chan->hs_hcon->hdev->amp_be_flush_to;
+
+ /* Class 1 devices have must have ERTM timeouts
+ * exceeding the Link Supervision Timeout. The
+ * default Link Supervision Timeout for AMP
+ * controllers is 10 seconds.
+ *
+ * Class 1 devices use 0xffffffff for their
+ * best-effort flush timeout, so the clamping logic
+ * will result in a timeout that meets the above
+ * requirement. ERTM timeouts are 16-bit values, so
+ * the maximum timeout is 65.535 seconds.
+ */
+
+ /* Convert timeout to milliseconds and round */
+ ertm_to = DIV_ROUND_UP_ULL(ertm_to, 1000);
+
+ /* This is the recommended formula for class 2 devices
+ * that start ERTM timers when packets are sent to the
+ * controller.
+ */
+ ertm_to = 3 * ertm_to + 500;
+
+ if (ertm_to > 0xffff)
+ ertm_to = 0xffff;
+
+ rfc->retrans_timeout = cpu_to_le16((u16) ertm_to);
+ rfc->monitor_timeout = rfc->retrans_timeout;
+ } else {
+ rfc->retrans_timeout = __constant_cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
+ rfc->monitor_timeout = __constant_cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
+ }
+}
+
static inline void l2cap_txwin_setup(struct l2cap_chan *chan)
{
if (chan->tx_win > L2CAP_DEFAULT_TX_WINDOW &&
@@ -3033,8 +3071,8 @@ done:
case L2CAP_MODE_ERTM:
rfc.mode = L2CAP_MODE_ERTM;
rfc.max_transmit = chan->max_tx;
- rfc.retrans_timeout = 0;
- rfc.monitor_timeout = 0;
+
+ __l2cap_set_ertm_timeouts(chan, &rfc);
size = min_t(u16, L2CAP_DEFAULT_MAX_PDU_SIZE, chan->conn->mtu -
L2CAP_EXT_HDR_SIZE - L2CAP_SDULEN_SIZE -
@@ -3262,10 +3300,7 @@ done:
rfc.max_pdu_size = cpu_to_le16(size);
chan->remote_mps = size;
- rfc.retrans_timeout =
- __constant_cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
- rfc.monitor_timeout =
- __constant_cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
+ __l2cap_set_ertm_timeouts(chan, &rfc);
set_bit(CONF_MODE_DONE, &chan->conf_state);
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (14 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
` (2 subsequent siblings)
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo
Cc: sunnyk, marcel, andrei.emeltchenko.news, Andrei Emeltchenko
When operating over BR/EDR, ERTM accounts for the maximum over-the-air
packet size when setting the PDU size. AMP controllers do not use the
same over-the-air packets, so the PDU size should only be based on the
HCI MTU of the AMP controller.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
net/bluetooth/l2cap_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 6662ee3..ef86ebb 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2272,7 +2272,9 @@ static int l2cap_segment_sdu(struct l2cap_chan *chan,
/* PDU size is derived from the HCI MTU */
pdu_len = chan->conn->mtu;
- pdu_len = min_t(size_t, pdu_len, L2CAP_BREDR_MAX_PAYLOAD);
+ /* Constrain PDU size for BR/EDR connections */
+ if (!chan->hs_hcon)
+ pdu_len = min_t(size_t, pdu_len, L2CAP_BREDR_MAX_PAYLOAD);
/* Adjust for largest possible L2CAP overhead. */
if (chan->fcs)
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 17/18] Bluetooth: Do not retransmit data during a channel move
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (15 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-23 22:24 ` [PATCHv5 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
2012-10-23 22:38 ` [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Marcel Holtmann
18 siblings, 0 replies; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Do not retransmit previously-sent data when a "receiver ready" s-frame
with the "final" flag is received during a move.
The ERTM state machines will resynchronize at the end of a channel
move, and the state machine needs to avoid state changes during a
move.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index ef86ebb..93f1ebb 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5591,8 +5591,8 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan,
if (control->final) {
clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
- if (!test_and_clear_bit(CONN_REJ_ACT,
- &chan->conn_state)) {
+ if (!test_and_clear_bit(CONN_REJ_ACT, &chan->conn_state) &&
+ !__chan_is_moving(chan)) {
control->final = 0;
l2cap_retransmit_all(chan, control);
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCHv5 18/18] Bluetooth: Start channel move when socket option is changed
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (16 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
@ 2012-10-23 22:24 ` Mat Martineau
2012-10-24 2:45 ` Gustavo Padovan
2012-10-23 22:38 ` [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Marcel Holtmann
18 siblings, 1 reply; 23+ messages in thread
From: Mat Martineau @ 2012-10-23 22:24 UTC (permalink / raw)
To: linux-bluetooth, gustavo; +Cc: sunnyk, marcel, andrei.emeltchenko.news
Channel moves are triggered by changes to the BT_CHANNEL_POLICY
sockopt when an ERTM or streaming-mode channel is connected.
Moves are only started if enable_hs is true.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
include/net/bluetooth/l2cap.h | 1 +
net/bluetooth/l2cap_core.c | 19 +++++++++++++++++++
net/bluetooth/l2cap_sock.c | 5 +++++
3 files changed, 25 insertions(+)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index b4c3c65..49783e9 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -809,5 +809,6 @@ void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan);
void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan);
void l2cap_chan_del(struct l2cap_chan *chan, int err);
void l2cap_send_conn_req(struct l2cap_chan *chan);
+void l2cap_move_start(struct l2cap_chan *chan);
#endif /* __L2CAP_H */
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 93f1ebb..fae0c70 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4453,6 +4453,25 @@ static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
}
}
+void l2cap_move_start(struct l2cap_chan *chan)
+{
+ BT_DBG("chan %p", chan);
+
+ if (chan->local_amp_id == HCI_BREDR_ID) {
+ if (chan->chan_policy != BT_CHANNEL_POLICY_AMP_PREFERRED)
+ return;
+ chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
+ chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
+ /* Placeholder - start physical link setup */
+ } else {
+ chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
+ chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
+ chan->move_id = 0;
+ l2cap_move_setup(chan);
+ l2cap_send_move_chan_req(chan, 0);
+ }
+}
+
static void l2cap_do_create(struct l2cap_chan *chan, int result,
u8 local_amp_id, u8 remote_amp_id)
{
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 89f1472..1bcfb84 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -736,6 +736,11 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
}
chan->chan_policy = (u8) opt;
+
+ if (sk->sk_state == BT_CONNECTED &&
+ chan->move_role == L2CAP_MOVE_ROLE_NONE)
+ l2cap_move_start(chan);
+
break;
default:
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCHv5 18/18] Bluetooth: Start channel move when socket option is changed
2012-10-23 22:24 ` [PATCHv5 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
@ 2012-10-24 2:45 ` Gustavo Padovan
0 siblings, 0 replies; 23+ messages in thread
From: Gustavo Padovan @ 2012-10-24 2:45 UTC (permalink / raw)
To: Mat Martineau; +Cc: linux-bluetooth, sunnyk, marcel, andrei.emeltchenko.news
Hi Mat,
* Mat Martineau <mathewm@codeaurora.org> [2012-10-23 15:24:23 -0700]:
> Channel moves are triggered by changes to the BT_CHANNEL_POLICY
> sockopt when an ERTM or streaming-mode channel is connected.
>
> Moves are only started if enable_hs is true.
>
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
> ---
> include/net/bluetooth/l2cap.h | 1 +
> net/bluetooth/l2cap_core.c | 19 +++++++++++++++++++
> net/bluetooth/l2cap_sock.c | 5 +++++
> 3 files changed, 25 insertions(+)
all 18 patches have been applied upstream. Thanks.
Gustavo
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCHv5 00/18] L2CAP signaling for AMP channel create/move
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
` (17 preceding siblings ...)
2012-10-23 22:24 ` [PATCHv5 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
@ 2012-10-23 22:38 ` Marcel Holtmann
2012-10-24 4:58 ` Andrei Emeltchenko
18 siblings, 1 reply; 23+ messages in thread
From: Marcel Holtmann @ 2012-10-23 22:38 UTC (permalink / raw)
To: Mat Martineau; +Cc: linux-bluetooth, gustavo, sunnyk, andrei.emeltchenko.news
Hi Mat,
> Here are the changes that process commands on the L2CAP signaling
> channel for setting up AMP channels. There's still a lot of
> integration to do as other AMP functionality is implemented. I've
> marked places that require this integration with "Placeholder"
> comments (look for that string).
this looks fine to me now.
Andrei, what is left to do on your side?
Regards
Marcel
^ permalink raw reply [flat|nested] 23+ messages in thread