[PATCH] Bluetooth: clean up

[PATCH] Bluetooth: clean up

[Valentin Ilie]

Clean up bluetooth files
- replace foo* bar with foo *bar
- add space arround '='
- remove trailing witespaces
- remove assignment in if
- fix coding style issues

Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
---
 drivers/bluetooth/Kconfig     |   12 +++++------
 drivers/bluetooth/dtl1_cs.c   |    6 +++---
 drivers/bluetooth/hci_bcsp.c  |   48 +++++++++++++++++++++--------------------
 drivers/bluetooth/hci_h5.c    |    6 ++++--
 drivers/bluetooth/hci_ldisc.c |   15 +++++++------
 drivers/bluetooth/hci_vhci.c  |    4 ++--
 6 files changed, 49 insertions(+), 42 deletions(-)

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 11a6104..6421414 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -30,8 +30,8 @@ config BT_HCIUART
 	help
 	  Bluetooth HCI UART driver.
 	  This driver is required if you want to use Bluetooth devices with
-	  serial port interface. You will also need this driver if you have 
-	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 
+	  serial port interface. You will also need this driver if you have
+	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
 	  adapter and BrainBoxes Bluetooth PC Card.
 
 	  Say Y here to compile support for Bluetooth UART devices into the
@@ -41,9 +41,9 @@ config BT_HCIUART_H4
 	bool "UART (H4) protocol support"
 	depends on BT_HCIUART
 	help
-	  UART (H4) is serial protocol for communication between Bluetooth 
-	  device and host. This protocol is required for most Bluetooth devices 
-	  with UART interface, including PCMCIA and CF cards. 
+	  UART (H4) is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Bluetooth devices
+	  with UART interface, including PCMCIA and CF cards.
 
 	  Say Y here to compile support for HCI UART (H4) protocol.
 
@@ -52,7 +52,7 @@ config BT_HCIUART_BCSP
 	depends on BT_HCIUART
 	select BITREVERSE
 	help
-	  BCSP (BlueCore Serial Protocol) is serial protocol for communication 
+	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
 	  between Bluetooth device and host. This protocol is required for non
 	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
 	  CF cards.
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 33f3a69..3b89c0d 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -153,7 +153,8 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
 		if (!pcmcia_dev_present(info->p_dev))
 			return;
 
-		if (!(skb = skb_dequeue(&(info->txq))))
+		skb = skb_dequeue(&(info->txq));
+		if (!skb)
 			break;
 
 		/* Send frame */
@@ -181,9 +182,8 @@ static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb)
 	int i;
 
 	printk(KERN_INFO "Bluetooth: Nokia control data =");
-	for (i = 0; i < skb->len; i++) {
+	for (i = 0; i < skb->len; i++)
 		printk(" %02x", skb->data[i]);
-	}
 	printk("\n");
 
 	/* transition to active state */
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 57e502e..fbd54e8 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -105,11 +105,11 @@ static const u16 crc_table[] = {
 #define BCSP_CRC_INIT(x) x = 0xffff
 
 /*
-   Update crc with next data byte
+	Update crc with next data byte
 
-   Implementation note
-        The data byte is treated as two nibbles.  The crc is generated
-        in reverse, i.e., bits are fed into the register from the top.
+	Implementation note
+		The data byte is treated as two nibbles.  The crc is generated
+		in reverse, i.e., bits are fed into the register from the top.
 */
 static void bcsp_crc_update(u16 *crc, u8 d)
 {
@@ -287,11 +287,12 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
 	struct bcsp_struct *bcsp = hu->priv;
 	unsigned long flags;
 	struct sk_buff *skb;
-	
+
 	/* First of all, check for unreliable messages in the queue,
 	   since they have priority */
 
-	if ((skb = skb_dequeue(&bcsp->unrel)) != NULL) {
+	skb = skb_dequeue(&bcsp->unrel);
+	if (skb != NULL) {
 		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
 		if (nskb) {
 			kfree_skb(skb);
@@ -308,7 +309,8 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
 
 	spin_lock_irqsave_nested(&bcsp->unack.lock, flags, SINGLE_DEPTH_NESTING);
 
-	if (bcsp->unack.qlen < BCSP_TXWINSIZE && (skb = skb_dequeue(&bcsp->rel)) != NULL) {
+	skb = skb_dequeue(&bcsp->rel);
+	if (bcsp->unack.qlen < BCSP_TXWINSIZE && skb != NULL) {
 		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
 		if (nskb) {
 			__skb_queue_tail(&bcsp->unack, skb);
@@ -433,7 +435,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
 			break;
 		default:
 			memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
-			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 && 
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
 					bcsp->rx_state != BCSP_W4_CRC)
 				bcsp_crc_update(&bcsp->message_crc, byte);
 			bcsp->rx_count--;
@@ -444,24 +446,24 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
 		switch (byte) {
 		case 0xdc:
 			memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
-			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 && 
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
 					bcsp->rx_state != BCSP_W4_CRC)
-				bcsp_crc_update(&bcsp-> message_crc, 0xc0);
+				bcsp_crc_update(&bcsp->message_crc, 0xc0);
 			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
 			bcsp->rx_count--;
 			break;
 
 		case 0xdd:
 			memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
-			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 && 
-					bcsp->rx_state != BCSP_W4_CRC) 
-				bcsp_crc_update(&bcsp-> message_crc, 0xdb);
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
+					bcsp->rx_state != BCSP_W4_CRC)
+				bcsp_crc_update(&bcsp->message_crc, 0xdb);
 			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
 			bcsp->rx_count--;
 			break;
 
 		default:
-			BT_ERR ("Invalid byte %02x after esc byte", byte);
+			BT_ERR("Invalid byte %02x after esc byte", byte);
 			kfree_skb(bcsp->rx_skb);
 			bcsp->rx_skb = NULL;
 			bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -524,9 +526,9 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
 
 				hci_recv_frame(bcsp->rx_skb);
 			} else {
-				BT_ERR ("Packet for unknown channel (%u %s)",
+				BT_ERR("Packet for unknown channel (%u %s)",
 					bcsp->rx_skb->data[1] & 0x0f,
-					bcsp->rx_skb->data[0] & 0x80 ? 
+					bcsp->rx_skb->data[0] & 0x80 ?
 					"reliable" : "unreliable");
 				kfree_skb(bcsp->rx_skb);
 			}
@@ -554,7 +556,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 	struct bcsp_struct *bcsp = hu->priv;
 	unsigned char *ptr;
 
-	BT_DBG("hu %p count %d rx_state %d rx_count %ld", 
+	BT_DBG("hu %p count %d rx_state %d rx_count %ld",
 		hu, count, bcsp->rx_state, bcsp->rx_count);
 
 	ptr = data;
@@ -574,7 +576,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 
 		switch (bcsp->rx_state) {
 		case BCSP_W4_BCSP_HDR:
-			if ((0xff & (u8) ~ (bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
+			if ((0xff & (u8) ~(bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
 					bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
 				BT_ERR("Error in BCSP hdr checksum");
 				kfree_skb(bcsp->rx_skb);
@@ -583,8 +585,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 				continue;
 			}
 			if (bcsp->rx_skb->data[0] & 0x80	/* reliable pkt */
-			    		&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
-				BT_ERR ("Out-of-order packet arrived, got %u expected %u",
+			&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
+				BT_ERR("Out-of-order packet arrived, got %u expected %u",
 					bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
 
 				kfree_skb(bcsp->rx_skb);
@@ -593,7 +595,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 				continue;
 			}
 			bcsp->rx_state = BCSP_W4_DATA;
-			bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) + 
+			bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
 					(bcsp->rx_skb->data[2] << 4);	/* May be 0 */
 			continue;
 
@@ -607,7 +609,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 
 		case BCSP_W4_CRC:
 			if (bitrev16(bcsp->message_crc) != bscp_get_crc(bcsp)) {
-				BT_ERR ("Checksum failed: computed %04x received %04x",
+				BT_ERR("Checksum failed: computed %04x received %04x",
 					bitrev16(bcsp->message_crc),
 					bscp_get_crc(bcsp));
 
@@ -645,7 +647,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 				BCSP_CRC_INIT(bcsp->message_crc);
 
 				/* Do not increment ptr or decrement count
-				 * Allocate packet. Max len of a BCSP pkt= 
+				 * Allocate packet. Max len of a BCSP pkt=
 				 * 0xFFF (payload) +4 (header) +2 (crc) */
 
 				bcsp->rx_skb = bt_skb_alloc(0x1005, GFP_ATOMIC);
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index b6154d5..67a0e6c 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -673,7 +673,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
 		return h5_prepare_pkt(hu, HCI_3WIRE_LINK_PKT, wakeup_req, 2);
 	}
 
-	if ((skb = skb_dequeue(&h5->unrel)) != NULL) {
+	skb = skb_dequeue(&h5->unrel);
+	if (skb != NULL) {
 		nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
 				      skb->data, skb->len);
 		if (nskb) {
@@ -690,7 +691,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
 	if (h5->unack.qlen >= h5->tx_win)
 		goto unlock;
 
-	if ((skb = skb_dequeue(&h5->rel)) != NULL) {
+	skb = skb_dequeue(&h5->rel);
+	if (skb != NULL) {
 		nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
 				      skb->data, skb->len);
 		if (nskb) {
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index bc68a44..d424e7d 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -236,7 +236,7 @@ static int hci_uart_close(struct hci_dev *hdev)
 /* Send frames from HCI layer */
 static int hci_uart_send_frame(struct sk_buff *skb)
 {
-	struct hci_dev* hdev = (struct hci_dev *) skb->dev;
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
 	struct hci_uart *hu;
 
 	if (!hdev) {
@@ -279,7 +279,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	if (tty->ops->write == NULL)
 		return -EOPNOTSUPP;
 
-	if (!(hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
+	hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+	if (!hu) {
 		BT_ERR("Can't allocate control structure");
 		return -ENFILE;
 	}
@@ -483,7 +484,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
  *
  * Return Value:    Command dependent
  */
-static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
+static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
 	struct hci_uart *hu = (void *)tty->disc_data;
@@ -564,7 +565,7 @@ static int __init hci_uart_init(void)
 
 	/* Register the tty discipline */
 
-	memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
+	memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
 	hci_uart_ldisc.magic		= TTY_LDISC_MAGIC;
 	hci_uart_ldisc.name		= "n_hci";
 	hci_uart_ldisc.open		= hci_uart_tty_open;
@@ -577,7 +578,8 @@ static int __init hci_uart_init(void)
 	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
 	hci_uart_ldisc.owner		= THIS_MODULE;
 
-	if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
+	err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
+	if (err) {
 		BT_ERR("HCI line discipline registration failed. (%d)", err);
 		return err;
 	}
@@ -622,7 +624,8 @@ static void __exit hci_uart_exit(void)
 #endif
 
 	/* Release tty registration of line discipline */
-	if ((err = tty_unregister_ldisc(N_HCI)))
+	err = tty_unregister_ldisc(N_HCI);
+	if (err)
 		BT_ERR("Can't unregister HCI line discipline (%d)", err);
 }
 
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index d8b7aed..4b499f2 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -82,7 +82,7 @@ static int vhci_flush(struct hci_dev *hdev)
 
 static int vhci_send_frame(struct sk_buff *skb)
 {
-	struct hci_dev* hdev = (struct hci_dev *) skb->dev;
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
 	struct vhci_data *data;
 
 	if (!hdev) {
@@ -281,7 +281,7 @@ static const struct file_operations vhci_fops = {
 	.llseek		= no_llseek,
 };
 
-static struct miscdevice vhci_miscdev= {
+static struct miscdevice vhci_miscdev = {
 	.name	= "vhci",
 	.fops	= &vhci_fops,
 	.minor	= MISC_DYNAMIC_MINOR,
-- 
1.7.9.5

Re: [PATCH] Bluetooth: clean up

[Dean Jenkins]

On 11/08/13 13:56, Valentin Ilie wrote:
> Clean up bluetooth files
> - replace foo* bar with foo *bar
> - add space arround '='
> - remove trailing witespaces
> - remove assignment in if
> - fix coding style issues
I suggest you split the commits into 2:
a) commit with whitespace changes
b) commit with other coding style changes that cause C statements to be 
rewritten.

This makes it easier for people to separate whitespace changes from 
technical changes to the C code.

Also it would help people back-porting these commits to older kernels.

>
> Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
> ---
>   drivers/bluetooth/Kconfig     |   12 +++++------
>   drivers/bluetooth/dtl1_cs.c   |    6 +++---
>   drivers/bluetooth/hci_bcsp.c  |   48 +++++++++++++++++++++--------------------
>   drivers/bluetooth/hci_h5.c    |    6 ++++--
>   drivers/bluetooth/hci_ldisc.c |   15 +++++++------
>   drivers/bluetooth/hci_vhci.c  |    4 ++--
>   6 files changed, 49 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> index 11a6104..6421414 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -30,8 +30,8 @@ config BT_HCIUART
>   	help
>   	  Bluetooth HCI UART driver.
>   	  This driver is required if you want to use Bluetooth devices with
> -	  serial port interface. You will also need this driver if you have
> -	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
> +	  serial port interface. You will also need this driver if you have
> +	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
>   	  adapter and BrainBoxes Bluetooth PC Card.
>   
>   	  Say Y here to compile support for Bluetooth UART devices into the
> @@ -41,9 +41,9 @@ config BT_HCIUART_H4
>   	bool "UART (H4) protocol support"
>   	depends on BT_HCIUART
>   	help
> -	  UART (H4) is serial protocol for communication between Bluetooth
> -	  device and host. This protocol is required for most Bluetooth devices
> -	  with UART interface, including PCMCIA and CF cards.
> +	  UART (H4) is serial protocol for communication between Bluetooth
> +	  device and host. This protocol is required for most Bluetooth devices
> +	  with UART interface, including PCMCIA and CF cards.
>   
>   	  Say Y here to compile support for HCI UART (H4) protocol.
>   
> @@ -52,7 +52,7 @@ config BT_HCIUART_BCSP
>   	depends on BT_HCIUART
>   	select BITREVERSE
>   	help
> -	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
> +	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
>   	  between Bluetooth device and host. This protocol is required for non
>   	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
>   	  CF cards.
> diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
> index 33f3a69..3b89c0d 100644
> --- a/drivers/bluetooth/dtl1_cs.c
> +++ b/drivers/bluetooth/dtl1_cs.c
> @@ -153,7 +153,8 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
>   		if (!pcmcia_dev_present(info->p_dev))
>   			return;
>   
> -		if (!(skb = skb_dequeue(&(info->txq))))
> +		skb = skb_dequeue(&(info->txq));
> +		if (!skb)
>   			break;
>   
>   		/* Send frame */
> @@ -181,9 +182,8 @@ static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb)
>   	int i;
>   
>   	printk(KERN_INFO "Bluetooth: Nokia control data =");
> -	for (i = 0; i < skb->len; i++) {
> +	for (i = 0; i < skb->len; i++)
>   		printk(" %02x", skb->data[i]);
> -	}
>   	printk("\n");
>   
>   	/* transition to active state */
> diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
> index 57e502e..fbd54e8 100644
> --- a/drivers/bluetooth/hci_bcsp.c
> +++ b/drivers/bluetooth/hci_bcsp.c
> @@ -105,11 +105,11 @@ static const u16 crc_table[] = {
>   #define BCSP_CRC_INIT(x) x = 0xffff
>   
>   /*
> -   Update crc with next data byte
> +	Update crc with next data byte
>   
> -   Implementation note
> -        The data byte is treated as two nibbles.  The crc is generated
> -        in reverse, i.e., bits are fed into the register from the top.
> +	Implementation note
> +		The data byte is treated as two nibbles.  The crc is generated
> +		in reverse, i.e., bits are fed into the register from the top.
>   */
>   static void bcsp_crc_update(u16 *crc, u8 d)
>   {
> @@ -287,11 +287,12 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
>   	struct bcsp_struct *bcsp = hu->priv;
>   	unsigned long flags;
>   	struct sk_buff *skb;
> -	
> +
>   	/* First of all, check for unreliable messages in the queue,
>   	   since they have priority */
>   
> -	if ((skb = skb_dequeue(&bcsp->unrel)) != NULL) {
> +	skb = skb_dequeue(&bcsp->unrel);
> +	if (skb != NULL) {
>   		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
>   		if (nskb) {
>   			kfree_skb(skb);
> @@ -308,7 +309,8 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
>   
>   	spin_lock_irqsave_nested(&bcsp->unack.lock, flags, SINGLE_DEPTH_NESTING);
>   
> -	if (bcsp->unack.qlen < BCSP_TXWINSIZE && (skb = skb_dequeue(&bcsp->rel)) != NULL) {
> +	skb = skb_dequeue(&bcsp->rel);
> +	if (bcsp->unack.qlen < BCSP_TXWINSIZE && skb != NULL) {
THIS CHANGE IS INCORRECT.

The call to skb_dequeue() depends on bcsp->unack.qlen < BCSP_TXWINSIZE 
being true. In other words the 2nd condition of && is not executed when 
the 1st condition is false. Therefore 2 nested if statements are needed.

>   		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
>   		if (nskb) {
>   			__skb_queue_tail(&bcsp->unack, skb);
> @@ -433,7 +435,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
>   			break;
>   		default:
>   			memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
> -			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
> +			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
>   					bcsp->rx_state != BCSP_W4_CRC)
>   				bcsp_crc_update(&bcsp->message_crc, byte);
>   			bcsp->rx_count--;
> @@ -444,24 +446,24 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
>   		switch (byte) {
>   		case 0xdc:
>   			memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
> -			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
> +			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
>   					bcsp->rx_state != BCSP_W4_CRC)
> -				bcsp_crc_update(&bcsp-> message_crc, 0xc0);
> +				bcsp_crc_update(&bcsp->message_crc, 0xc0);
>   			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
>   			bcsp->rx_count--;
>   			break;
>   
>   		case 0xdd:
>   			memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
> -			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
> -					bcsp->rx_state != BCSP_W4_CRC)
> -				bcsp_crc_update(&bcsp-> message_crc, 0xdb);
> +			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
> +					bcsp->rx_state != BCSP_W4_CRC)
> +				bcsp_crc_update(&bcsp->message_crc, 0xdb);
>   			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
>   			bcsp->rx_count--;
>   			break;
>   
>   		default:
> -			BT_ERR ("Invalid byte %02x after esc byte", byte);
> +			BT_ERR("Invalid byte %02x after esc byte", byte);
>   			kfree_skb(bcsp->rx_skb);
>   			bcsp->rx_skb = NULL;
>   			bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
> @@ -524,9 +526,9 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
>   
>   				hci_recv_frame(bcsp->rx_skb);
>   			} else {
> -				BT_ERR ("Packet for unknown channel (%u %s)",
> +				BT_ERR("Packet for unknown channel (%u %s)",
>   					bcsp->rx_skb->data[1] & 0x0f,
> -					bcsp->rx_skb->data[0] & 0x80 ?
> +					bcsp->rx_skb->data[0] & 0x80 ?
>   					"reliable" : "unreliable");
>   				kfree_skb(bcsp->rx_skb);
>   			}
> @@ -554,7 +556,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
>   	struct bcsp_struct *bcsp = hu->priv;
>   	unsigned char *ptr;
>   
> -	BT_DBG("hu %p count %d rx_state %d rx_count %ld",
> +	BT_DBG("hu %p count %d rx_state %d rx_count %ld",
>   		hu, count, bcsp->rx_state, bcsp->rx_count);
>   
>   	ptr = data;
> @@ -574,7 +576,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
>   
>   		switch (bcsp->rx_state) {
>   		case BCSP_W4_BCSP_HDR:
> -			if ((0xff & (u8) ~ (bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
> +			if ((0xff & (u8) ~(bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
>   					bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
>   				BT_ERR("Error in BCSP hdr checksum");
>   				kfree_skb(bcsp->rx_skb);
> @@ -583,8 +585,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
>   				continue;
>   			}
>   			if (bcsp->rx_skb->data[0] & 0x80	/* reliable pkt */
> -			    		&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
> -				BT_ERR ("Out-of-order packet arrived, got %u expected %u",
> +			&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
> +				BT_ERR("Out-of-order packet arrived, got %u expected %u",
>   					bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
>   
>   				kfree_skb(bcsp->rx_skb);
> @@ -593,7 +595,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
>   				continue;
>   			}
>   			bcsp->rx_state = BCSP_W4_DATA;
> -			bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
> +			bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
>   					(bcsp->rx_skb->data[2] << 4);	/* May be 0 */
>   			continue;
>   
> @@ -607,7 +609,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
>   
>   		case BCSP_W4_CRC:
>   			if (bitrev16(bcsp->message_crc) != bscp_get_crc(bcsp)) {
> -				BT_ERR ("Checksum failed: computed %04x received %04x",
> +				BT_ERR("Checksum failed: computed %04x received %04x",
>   					bitrev16(bcsp->message_crc),
>   					bscp_get_crc(bcsp));
>   
> @@ -645,7 +647,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
>   				BCSP_CRC_INIT(bcsp->message_crc);
>   
>   				/* Do not increment ptr or decrement count
> -				 * Allocate packet. Max len of a BCSP pkt=
> +				 * Allocate packet. Max len of a BCSP pkt=
>   				 * 0xFFF (payload) +4 (header) +2 (crc) */
>   
>   				bcsp->rx_skb = bt_skb_alloc(0x1005, GFP_ATOMIC);
> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
> index b6154d5..67a0e6c 100644
> --- a/drivers/bluetooth/hci_h5.c
> +++ b/drivers/bluetooth/hci_h5.c
> @@ -673,7 +673,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
>   		return h5_prepare_pkt(hu, HCI_3WIRE_LINK_PKT, wakeup_req, 2);
>   	}
>   
> -	if ((skb = skb_dequeue(&h5->unrel)) != NULL) {
> +	skb = skb_dequeue(&h5->unrel);
> +	if (skb != NULL) {
>   		nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
>   				      skb->data, skb->len);
>   		if (nskb) {
> @@ -690,7 +691,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
>   	if (h5->unack.qlen >= h5->tx_win)
>   		goto unlock;
>   
> -	if ((skb = skb_dequeue(&h5->rel)) != NULL) {
> +	skb = skb_dequeue(&h5->rel);
> +	if (skb != NULL) {
>   		nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
>   				      skb->data, skb->len);
>   		if (nskb) {
> diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
> index bc68a44..d424e7d 100644
> --- a/drivers/bluetooth/hci_ldisc.c
> +++ b/drivers/bluetooth/hci_ldisc.c
> @@ -236,7 +236,7 @@ static int hci_uart_close(struct hci_dev *hdev)
>   /* Send frames from HCI layer */
>   static int hci_uart_send_frame(struct sk_buff *skb)
>   {
> -	struct hci_dev* hdev = (struct hci_dev *) skb->dev;
> +	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
>   	struct hci_uart *hu;
>   
>   	if (!hdev) {
> @@ -279,7 +279,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
>   	if (tty->ops->write == NULL)
>   		return -EOPNOTSUPP;
>   
> -	if (!(hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
> +	hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
> +	if (!hu) {
>   		BT_ERR("Can't allocate control structure");
>   		return -ENFILE;
>   	}
> @@ -483,7 +484,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
>    *
>    * Return Value:    Command dependent
>    */
> -static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
> +static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
>   					unsigned int cmd, unsigned long arg)
>   {
>   	struct hci_uart *hu = (void *)tty->disc_data;
> @@ -564,7 +565,7 @@ static int __init hci_uart_init(void)
>   
>   	/* Register the tty discipline */
>   
> -	memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
> +	memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
>   	hci_uart_ldisc.magic		= TTY_LDISC_MAGIC;
>   	hci_uart_ldisc.name		= "n_hci";
>   	hci_uart_ldisc.open		= hci_uart_tty_open;
> @@ -577,7 +578,8 @@ static int __init hci_uart_init(void)
>   	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
>   	hci_uart_ldisc.owner		= THIS_MODULE;
>   
> -	if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
> +	err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
> +	if (err) {
>   		BT_ERR("HCI line discipline registration failed. (%d)", err);
>   		return err;
>   	}
> @@ -622,7 +624,8 @@ static void __exit hci_uart_exit(void)
>   #endif
>   
>   	/* Release tty registration of line discipline */
> -	if ((err = tty_unregister_ldisc(N_HCI)))
> +	err = tty_unregister_ldisc(N_HCI);
> +	if (err)
>   		BT_ERR("Can't unregister HCI line discipline (%d)", err);
>   }
>   
> diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
> index d8b7aed..4b499f2 100644
> --- a/drivers/bluetooth/hci_vhci.c
> +++ b/drivers/bluetooth/hci_vhci.c
> @@ -82,7 +82,7 @@ static int vhci_flush(struct hci_dev *hdev)
>   
>   static int vhci_send_frame(struct sk_buff *skb)
>   {
> -	struct hci_dev* hdev = (struct hci_dev *) skb->dev;
> +	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
>   	struct vhci_data *data;
>   
>   	if (!hdev) {
> @@ -281,7 +281,7 @@ static const struct file_operations vhci_fops = {
>   	.llseek		= no_llseek,
>   };
>   
> -static struct miscdevice vhci_miscdev= {
> +static struct miscdevice vhci_miscdev = {
>   	.name	= "vhci",
>   	.fops	= &vhci_fops,
>   	.minor	= MISC_DYNAMIC_MINOR,
Dean Jenkins
Mentor Graphics

[PATCH v2] Bluetooth: Remove assignment in if

[Valentin Ilie]

Remove assignment in if

Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
---
 drivers/bluetooth/ath3k.c       |  7 +++----
 drivers/bluetooth/bfusb.c       | 14 ++++++++++----
 drivers/bluetooth/bluecard_cs.c |  9 ++++++---
 drivers/bluetooth/bt3c_cs.c     |  7 ++++---
 drivers/bluetooth/btuart_cs.c   |  6 ++++--
 drivers/bluetooth/dtl1_cs.c     |  9 ++++++---
 drivers/bluetooth/hci_bcsp.c    | 26 +++++++++++++++-----------
 drivers/bluetooth/hci_h5.c      |  6 ++++--
 drivers/bluetooth/hci_ldisc.c   |  9 ++++++---
 9 files changed, 58 insertions(+), 35 deletions(-)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index a12b923..bdefdfc 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -166,10 +166,9 @@ static int ath3k_load_firmware(struct usb_device *udev,
 	}
 
 	memcpy(send_buf, firmware->data, 20);
-	if ((err = usb_control_msg(udev, pipe,
-				USB_REQ_DFU_DNLOAD,
-				USB_TYPE_VENDOR, 0, 0,
-				send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
+	err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
+				0, 0, send_buf, 20, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
 		BT_ERR("Can't change to loading configuration err");
 		goto error;
 	}
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 995aee9..2306b0b 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -131,8 +131,11 @@ static int bfusb_send_bulk(struct bfusb_data *data, struct sk_buff *skb)
 
 	BT_DBG("bfusb %p skb %p len %d", data, skb, skb->len);
 
-	if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC)))
-		return -ENOMEM;
+	if (!urb) {
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+	}
 
 	pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep);
 
@@ -218,8 +221,11 @@ static int bfusb_rx_submit(struct bfusb_data *data, struct urb *urb)
 
 	BT_DBG("bfusb %p urb %p", data, urb);
 
-	if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC)))
-		return -ENOMEM;
+	if (!urb) {
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+	}
 
 	skb = bt_skb_alloc(size, GFP_ATOMIC);
 	if (!skb) {
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 6c3e3d4..b09e3a9 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -257,7 +257,8 @@ static void bluecard_write_wakeup(bluecard_info_t *info)
 			ready_bit = XMIT_BUF_ONE_READY;
 		}
 
-		if (!(skb = skb_dequeue(&(info->txq))))
+		skb = skb_dequeue(&(info->txq));
+		if (!skb)
 			break;
 
 		if (bt_cb(skb)->pkt_type & 0x80) {
@@ -391,7 +392,8 @@ static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
 		if (info->rx_skb == NULL) {
 			info->rx_state = RECV_WAIT_PACKET_TYPE;
 			info->rx_count = 0;
-			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
 				BT_ERR("Can't allocate mem for new packet");
 				return;
 			}
@@ -567,7 +569,8 @@ static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
 	/* Ericsson baud rate command */
 	unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
 
-	if (!(skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+	skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+	if (!skb) {
 		BT_ERR("Can't allocate mem for new packet");
 		return -1;
 	}
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index a1aaa3b..653c109 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -193,8 +193,8 @@ static void bt3c_write_wakeup(bt3c_info_t *info)
 		if (!pcmcia_dev_present(info->p_dev))
 			break;
 
-
-		if (!(skb = skb_dequeue(&(info->txq)))) {
+		skb = skb_dequeue(&(info->txq));
+		if (!skb) {
 			clear_bit(XMIT_SENDING, &(info->tx_state));
 			break;
 		}
@@ -238,7 +238,8 @@ static void bt3c_receive(bt3c_info_t *info)
 		if (info->rx_skb == NULL) {
 			info->rx_state = RECV_WAIT_PACKET_TYPE;
 			info->rx_count = 0;
-			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
 				BT_ERR("Can't allocate mem for new packet");
 				return;
 			}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index beb262f..4f99e05 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -149,7 +149,8 @@ static void btuart_write_wakeup(btuart_info_t *info)
 		if (!pcmcia_dev_present(info->p_dev))
 			return;
 
-		if (!(skb = skb_dequeue(&(info->txq))))
+		skb = skb_dequeue(&(info->txq));
+		if (!skb)
 			break;
 
 		/* Send frame */
@@ -190,7 +191,8 @@ static void btuart_receive(btuart_info_t *info)
 		if (info->rx_skb == NULL) {
 			info->rx_state = RECV_WAIT_PACKET_TYPE;
 			info->rx_count = 0;
-			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
 				BT_ERR("Can't allocate mem for new packet");
 				return;
 			}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 33f3a69..358694e 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -153,7 +153,8 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
 		if (!pcmcia_dev_present(info->p_dev))
 			return;
 
-		if (!(skb = skb_dequeue(&(info->txq))))
+		skb = skb_dequeue(&(info->txq));
+		if (!skb)
 			break;
 
 		/* Send frame */
@@ -215,13 +216,15 @@ static void dtl1_receive(dtl1_info_t *info)
 		info->hdev->stat.byte_rx++;
 
 		/* Allocate packet */
-		if (info->rx_skb == NULL)
-			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+		if (info->rx_skb == NULL) {
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
 				BT_ERR("Can't allocate mem for new packet");
 				info->rx_state = RECV_WAIT_NSH;
 				info->rx_count = NSHL;
 				return;
 			}
+		}
 
 		*skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
 		nsh = (nsh_t *)info->rx_skb->data;
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 57e502e..442f836 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -291,7 +291,8 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
 	/* First of all, check for unreliable messages in the queue,
 	   since they have priority */
 
-	if ((skb = skb_dequeue(&bcsp->unrel)) != NULL) {
+	skb = skb_dequeue(&bcsp->unrel);
+	if (skb != NULL) {
 		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
 		if (nskb) {
 			kfree_skb(skb);
@@ -308,16 +309,19 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
 
 	spin_lock_irqsave_nested(&bcsp->unack.lock, flags, SINGLE_DEPTH_NESTING);
 
-	if (bcsp->unack.qlen < BCSP_TXWINSIZE && (skb = skb_dequeue(&bcsp->rel)) != NULL) {
-		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
-		if (nskb) {
-			__skb_queue_tail(&bcsp->unack, skb);
-			mod_timer(&bcsp->tbcsp, jiffies + HZ / 4);
-			spin_unlock_irqrestore(&bcsp->unack.lock, flags);
-			return nskb;
-		} else {
-			skb_queue_head(&bcsp->rel, skb);
-			BT_ERR("Could not dequeue pkt because alloc_skb failed");
+	if (bcsp->unack.qlen < BCSP_TXWINSIZE) {
+		skb = skb_dequeue(&bcsp->rel);
+		if (skb != NULL) {
+			struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
+			if (nskb) {
+				__skb_queue_tail(&bcsp->unack, skb);
+				mod_timer(&bcsp->tbcsp, jiffies + HZ / 4);
+				spin_unlock_irqrestore(&bcsp->unack.lock, flags);
+				return nskb;
+			} else {
+				skb_queue_head(&bcsp->rel, skb);
+				BT_ERR("Could not dequeue pkt because alloc_skb failed");
+			}
 		}
 	}
 
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index b6154d5..4e75763 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -673,7 +673,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
 		return h5_prepare_pkt(hu, HCI_3WIRE_LINK_PKT, wakeup_req, 2);
 	}
 
-	if ((skb = skb_dequeue(&h5->unrel)) != NULL) {
+	skb = skb_dequeue(&h5->unrel);
+	if (skb != NULL) {
 		nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
 				      skb->data, skb->len);
 		if (nskb) {
@@ -690,7 +691,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
 	if (h5->unack.qlen >= h5->tx_win)
 		goto unlock;
 
-	if ((skb = skb_dequeue(&h5->rel)) != NULL) {
+	skb = skb_dequeue(&h5->rel);
+	if (skb != NULL) {
 		nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
 				      skb->data, skb->len);
 		if (nskb) {
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index bc68a44..4a052b5 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -279,7 +279,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	if (tty->ops->write == NULL)
 		return -EOPNOTSUPP;
 
-	if (!(hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
+	hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+	if (!hu) {
 		BT_ERR("Can't allocate control structure");
 		return -ENFILE;
 	}
@@ -577,7 +578,8 @@ static int __init hci_uart_init(void)
 	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
 	hci_uart_ldisc.owner		= THIS_MODULE;
 
-	if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
+	err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
+	if (err) {
 		BT_ERR("HCI line discipline registration failed. (%d)", err);
 		return err;
 	}
@@ -622,7 +624,8 @@ static void __exit hci_uart_exit(void)
 #endif
 
 	/* Release tty registration of line discipline */
-	if ((err = tty_unregister_ldisc(N_HCI)))
+	err = tty_unregister_ldisc(N_HCI);
+	if (err)
 		BT_ERR("Can't unregister HCI line discipline (%d)", err);
 }
 
-- 
1.8.1.2

Re: [PATCH v2] Bluetooth: Remove assignment in if

[Valentin Ilie]

On 12 August 2013 18:46, Valentin Ilie <valentin.ilie@gmail.com> wrote:
> Remove assignment in if

Hello,

Can anyone look into this patch? I've corrected it as requested.

Regards,

-- 
Valentin Ilie

Re: [PATCH v2] Bluetooth: Remove assignment in if

[Gustavo Padovan]

Hi Valentin,

2013-08-19 Valentin Ilie <valentin.ilie@gmail.com>:

> On 12 August 2013 18:46, Valentin Ilie <valentin.ilie@gmail.com> wrote:
> > Remove assignment in if
> 
> Hello,
> 
> Can anyone look into this patch? I've corrected it as requested.

I can't see your patch anywhere. Could you please resend it?

	Gustavo

Re: [PATCH v2] Bluetooth: Remove assignment in if

[Johan Hedberg]

Hi Valentin,

On Mon, Aug 12, 2013, Valentin Ilie wrote:
> Remove assignment in if
> 
> Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
> ---
>  drivers/bluetooth/ath3k.c       |  7 +++----
>  drivers/bluetooth/bfusb.c       | 14 ++++++++++----
>  drivers/bluetooth/bluecard_cs.c |  9 ++++++---
>  drivers/bluetooth/bt3c_cs.c     |  7 ++++---
>  drivers/bluetooth/btuart_cs.c   |  6 ++++--
>  drivers/bluetooth/dtl1_cs.c     |  9 ++++++---
>  drivers/bluetooth/hci_bcsp.c    | 26 +++++++++++++++-----------
>  drivers/bluetooth/hci_h5.c      |  6 ++++--
>  drivers/bluetooth/hci_ldisc.c   |  9 ++++++---
>  9 files changed, 58 insertions(+), 35 deletions(-)

Applied (with a minor coding style fix) to the bluetooth-next tree.
Thanks.

Johan