From: "Ken O'Brien" <ken@laptop.site>
To: Gustavo Padovan <gustavo@padovan.org>,
"Ken O'Brien" <kernel@kenobrien.org>,
marcel@holtmann.org, johan.hedberg@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] bluetooth: btusb: Added support for Belkin F8065bf usb bluetooth device
Date: Thu, 19 Sep 2013 21:56:36 +0100 [thread overview]
Message-ID: <20130919205636.GA4915@laptop.site> (raw)
In-Reply-To: <20130919192403.GH4006@joana>
Sure thing. Here's the output:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=050d ProdID=065a Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=0002723E2D29
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
On Thu, Sep 19, 2013 at 02:24:03PM -0500, Gustavo Padovan wrote:
> Hi Ken,
>
> 2013-09-19 Ken O'Brien <kernel@kenobrien.org>:
>
> > Belkin bluetooth device's usb device id added to generic usb bluetooth driver.
> >
> > Signed-off-by: Ken O'Brien <kernel@kenobrien.org>
> > ---
> > drivers/bluetooth/btusb.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 8e16f0a..117b90c 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -111,6 +111,9 @@ static struct usb_device_id btusb_table[] = {
> >
> > /*Broadcom devices with vendor specific id */
> > { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
> > +
> > + /* Belkin F8T065bf */
> > + { USB_DEVICE(0x050d, 0x065a) },
>
> Could you please add the output of /sys/kernel/debug/usb/devices for this
> bluetooth controller to the commit messages, like we do for any new device id
> we add to btusb. Thanks.
>
> Gustavo
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2013-09-19 20:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-19 17:06 [PATCH] bluetooth: btusb: Added support for Belkin F8065bf usb bluetooth device Ken O'Brien
2013-09-19 19:24 ` Gustavo Padovan
2013-09-19 20:56 ` Ken O'Brien [this message]
2013-09-19 22:07 ` Ken O'Brien
2013-09-19 22:44 ` Ken O'Brien
-- strict thread matches above, loose matches on Subject: below --
2013-09-19 17:21 Ken O'Brien
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130919205636.GA4915@laptop.site \
--to=ken@laptop.site \
--cc=gustavo@padovan.org \
--cc=johan.hedberg@gmail.com \
--cc=kernel@kenobrien.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).