From: Andrei Emeltchenko <andrei.emeltchenko.news@gmail.com>
To: Marcin Kraglak <marcin.kraglak@tieto.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 5/5] android: Add and remove uuids in mgmt interface
Date: Mon, 28 Oct 2013 15:24:23 +0200 [thread overview]
Message-ID: <20131028132420.GA27517@aemeltch-MOBL1> (raw)
In-Reply-To: <1382963409-1012-5-git-send-email-marcin.kraglak@tieto.com>
Hi Marcin,
On Mon, Oct 28, 2013 at 01:30:09PM +0100, Marcin Kraglak wrote:
> Use mgmt interface for adding and removing uuids to adapter.
> This is needed for proper changing adapter's class of device.
> ---
> android/adapter.c | 141 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 141 insertions(+)
>
> diff --git a/android/adapter.c b/android/adapter.c
> index b1cb5f8..bed0423 100644
> --- a/android/adapter.c
> +++ b/android/adapter.c
> @@ -532,10 +532,105 @@ error:
> ipc_send_rsp(io, HAL_SERVICE_ID_BLUETOOTH, status);
> }
>
> +static int uuid_cmp(const void *a, const void *b)
> +{
> + const sdp_record_t *rec = a;
> + const uuid_t *uuid = b;
> +
> + return sdp_uuid_cmp(&rec->svclass, uuid);
> +}
> +
> +static void uuid_to_uuid128(uuid_t *uuid128, const uuid_t *uuid)
> +{
> + if (uuid->type == SDP_UUID16)
> + sdp_uuid16_to_uuid128(uuid128, uuid);
> + else if (uuid->type == SDP_UUID32)
> + sdp_uuid32_to_uuid128(uuid128, uuid);
> + else
> + memcpy(uuid128, uuid, sizeof(*uuid));
> +}
> +
> +static uint8_t get_uuid_mask(const uuid_t *uuid)
> +{
> + if (uuid->type != SDP_UUID16)
> + return 0;
> +
> + switch (uuid->value.uuid16) {
> + case DIALUP_NET_SVCLASS_ID:
> + case CIP_SVCLASS_ID:
> + return 0x42; /* Telephony & Networking */
> + case IRMC_SYNC_SVCLASS_ID:
> + case OBEX_OBJPUSH_SVCLASS_ID:
> + case OBEX_FILETRANS_SVCLASS_ID:
> + case IRMC_SYNC_CMD_SVCLASS_ID:
> + case PBAP_PSE_SVCLASS_ID:
> + return 0x10; /* Object Transfer */
> + case HEADSET_SVCLASS_ID:
> + case HANDSFREE_SVCLASS_ID:
> + return 0x20; /* Audio */
> + case CORDLESS_TELEPHONY_SVCLASS_ID:
> + case INTERCOM_SVCLASS_ID:
> + case FAX_SVCLASS_ID:
> + case SAP_SVCLASS_ID:
> + /*
> + * Setting the telephony bit for the handsfree audio gateway
> + * role is not required by the HFP specification, but the
> + * Nokia 616 carkit is just plain broken! It will refuse
> + * pairing without this bit set.
> + */
> + case HANDSFREE_AGW_SVCLASS_ID:
> + return 0x40; /* Telephony */
> + case AUDIO_SOURCE_SVCLASS_ID:
> + case VIDEO_SOURCE_SVCLASS_ID:
> + return 0x08; /* Capturing */
> + case AUDIO_SINK_SVCLASS_ID:
> + case VIDEO_SINK_SVCLASS_ID:
> + return 0x04; /* Rendering */
> + case PANU_SVCLASS_ID:
> + case NAP_SVCLASS_ID:
> + case GN_SVCLASS_ID:
> + return 0x02; /* Networking */
> + default:
> + return 0;
> + }
> +}
Can those functions be reused between our android/adapter and src/adapter?
Best regards
Andrei Emeltchenko
> +
> +static void add_uuid_complete(uint8_t status, uint16_t length,
> + const void *param, void *user_data)
> +{
> + if (status != MGMT_STATUS_SUCCESS) {
> + error("Failed to add UUID: %s (0x%02x)",
> + mgmt_errstr(status), status);
> + return;
> + }
> + /*TODO inform that adapter uuids has been changed*/
> +}
> +
> +static int add_uuid(uuid_t *uuid, uint8_t svc_hint)
> +{
> + struct mgmt_cp_add_uuid cp;
> + uuid_t uuid128;
> + uint128_t uint128;
> +
> + uuid_to_uuid128(&uuid128, uuid);
> +
> + ntoh128((uint128_t *) uuid128.value.uuid128.data, &uint128);
> + htob128(&uint128, (uint128_t *) cp.uuid);
> + cp.svc_hint = svc_hint;
> +
> + if (mgmt_send(adapter->mgmt, MGMT_OP_ADD_UUID,
> + 0, sizeof(cp), &cp,
> + add_uuid_complete, adapter, NULL) > 0)
> + return 0;
> +
> + return -EIO;
> +}
> +
> static void adapter_service_insert(sdp_record_t *rec)
> {
> sdp_list_t *browse_list = NULL;
> uuid_t browse_uuid;
> + bool new_uuid;
>
> /* skip record without a browse group */
> if (sdp_get_browse_groups(rec, &browse_list) < 0) {
> @@ -552,6 +647,19 @@ static void adapter_service_insert(sdp_record_t *rec)
> adapter->services = sdp_list_insert_sorted(
> adapter->services, rec, record_sort);
>
> + if (!sdp_list_find(adapter->services, &rec->svclass, uuid_cmp))
> + new_uuid = true;
> + else
> + new_uuid = false;
> +
> + adapter->services = sdp_list_insert_sorted(adapter->services, rec,
> + record_sort);
> +
> + if (new_uuid) {
> + uint8_t svc_hint = get_uuid_mask(&rec->svclass);
> + add_uuid(&rec->svclass, svc_hint);
> + }
> +
> done:
> sdp_list_free(browse_list, free);
> }
> @@ -569,6 +677,36 @@ int bt_adapter_service_add(sdp_record_t *rec)
> return ret;
> }
>
> +static void remove_uuid_complete(uint8_t status, uint16_t length,
> + const void *param, void *user_data)
> +{
> + if (status != MGMT_STATUS_SUCCESS) {
> + error("Failed to remove UUID: %s (0x%02x)",
> + mgmt_errstr(status), status);
> + return;
> + }
> + /*TODO inform that adapter uuids has been changed*/
> +}
> +
> +static int remove_uuid(uuid_t *uuid)
> +{
> + struct mgmt_cp_remove_uuid cp;
> + uuid_t uuid128;
> + uint128_t uint128;
> +
> + uuid_to_uuid128(&uuid128, uuid);
> +
> + ntoh128((uint128_t *) uuid128.value.uuid128.data, &uint128);
> + htob128(&uint128, (uint128_t *) cp.uuid);
> +
> + if (mgmt_send(adapter->mgmt, MGMT_OP_REMOVE_UUID,
> + 0, sizeof(cp), &cp,
> + remove_uuid_complete, adapter, NULL) > 0)
> + return 0;
> +
> + return -EIO;
> +}
> +
> void bt_adapter_service_remove(uint32_t handle)
> {
> sdp_record_t *rec = sdp_record_find(handle);
> @@ -578,6 +716,9 @@ void bt_adapter_service_remove(uint32_t handle)
>
> adapter->services = sdp_list_remove(adapter->services, rec);
>
> + if (!sdp_list_find(adapter->services, &rec->svclass, uuid_cmp))
> + remove_uuid(&rec->svclass);
> +
> remove_record_from_server(rec->handle);
> }
>
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2013-10-28 13:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-28 12:30 [PATCH 1/5] android/hal: Add initial socket implementation Marcin Kraglak
2013-10-28 12:30 ` [PATCH 2/5] android: Initial implementation of socket interface Marcin Kraglak
2013-10-28 12:30 ` [PATCH 3/5] android: Add initial sdp implementation Marcin Kraglak
2013-10-28 12:30 ` [PATCH 4/5] android: Cache adapter services in bt_adapter struct Marcin Kraglak
2013-10-28 12:30 ` [PATCH 5/5] android: Add and remove uuids in mgmt interface Marcin Kraglak
2013-10-28 13:23 ` Johan Hedberg
2013-10-28 13:47 ` Marcel Holtmann
2013-10-28 13:24 ` Andrei Emeltchenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131028132420.GA27517@aemeltch-MOBL1 \
--to=andrei.emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcin.kraglak@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox