From: Tedd Ho-Jeong An <tedd.an@intel.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
Subject: Re: [PATCH] Bluetooth: Add support for Intel Bluetooth device 3168 [8087:0aa7]
Date: Mon, 20 Jun 2016 13:20:52 -0700 [thread overview]
Message-ID: <20160620132052.118f8ee6@fedora-linux-22.shared> (raw)
In-Reply-To: <8FDD3771-6106-4F35-9783-9D41D357BAB8@holtmann.org>
Hi Marcel
On Mon, 20 Jun 2016 22:12:23 +0200
Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Tedd,
>
> > This patch adds support for Intel Bluetooth device 3168 also known
> > as Sandy Peak (SdP).
> >
> > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> > D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=8087 ProdID=0aa7 Rev= 0.01
> > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> >
> > Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
> > ---
> > drivers/bluetooth/btusb.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index a3be65e..9a2c602 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -313,6 +313,7 @@ static const struct usb_device_id blacklist_table[] = {
> > { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> > { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
> > { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
> > + { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL },
> > { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
>
> so SdP is actually iBT 2.x based?
Yes, actually, SdP is WiFi 1x1 module and BT is same as StP D1. It just magically
has a different VID/PID.
>
> Even while this looks odd, lets keep the list sorted by PID and not by driver_info.
ACK, I will send out new one shortly.
>
> Regards
>
> Marcel
>
prev parent reply other threads:[~2016-06-20 20:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 19:05 [PATCH] Bluetooth: Add support for Intel Bluetooth device 3168 [8087:0aa7] Tedd Ho-Jeong An
2016-06-20 20:12 ` Marcel Holtmann
2016-06-20 20:20 ` Tedd Ho-Jeong An [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160620132052.118f8ee6@fedora-linux-22.shared \
--to=tedd.an@intel.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).