From: "Michał Narajowski" <michal.narajowski@codecoup.pl>
To: linux-bluetooth@vger.kernel.org
Cc: "Michał Narajowski" <michal.narajowski@codecoup.pl>
Subject: [PATCH BlueZ 28/31] monitor: Add LE Set Privacy Mode decoding
Date: Tue, 6 Jun 2017 11:41:17 +0200 [thread overview]
Message-ID: <20170606094120.14541-31-michal.narajowski@codecoup.pl> (raw)
In-Reply-To: <20170606094120.14541-1-michal.narajowski@codecoup.pl>
< HCI Command: LE Set Privacy Mode (0x08|0x004e) plen 8
Peer Identity address type: Random (0x01)
Peer Identity address: 07:06:05:04:03:02 (Non-Resolvable)
Privacy Mode: Reserved (0x08)
---
monitor/bt.h | 7 +++++++
monitor/packet.c | 27 ++++++++++++++++++++++++++-
2 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/monitor/bt.h b/monitor/bt.h
index 8b58795..3e88d36 100644
--- a/monitor/bt.h
+++ b/monitor/bt.h
@@ -2373,6 +2373,13 @@ struct bt_hci_cmd_le_write_rf_path_comp {
uint16_t rf_rx_path_comp;
} __attribute__ ((packed));
+#define BT_HCI_CMD_LE_SET_PRIV_MODE 0x204e
+struct bt_hci_cmd_le_set_priv_mode {
+ uint8_t peer_id_addr_type;
+ uint8_t peer_id_addr[6];
+ uint8_t priv_mode;
+} __attribute__ ((packed));
+
#define BT_HCI_EVT_INQUIRY_COMPLETE 0x01
struct bt_hci_evt_inquiry_complete {
uint8_t status;
diff --git a/monitor/packet.c b/monitor/packet.c
index 4b0c5df..dbb920f 100644
--- a/monitor/packet.c
+++ b/monitor/packet.c
@@ -7643,6 +7643,29 @@ static void le_write_rf_path_comp_cmd(const void *data, uint8_t size)
print_field("RF Rx Path Compensation Value: 0x%4.4x", cmd->rf_rx_path_comp);
}
+static void le_set_priv_mode_cmd(const void *data, uint8_t size)
+{
+ const struct bt_hci_cmd_le_set_priv_mode *cmd = data;
+ const char *str;
+
+ print_addr_type("Peer Identity address type", cmd->peer_id_addr_type);
+ print_addr("Peer Identity address", cmd->peer_id_addr, cmd->peer_id_addr_type);
+
+ switch (cmd->priv_mode) {
+ case 0x00:
+ str = "Use Network Privacy";
+ break;
+ case 0x01:
+ str = "Use Device Privacy";
+ break;
+ default:
+ str = "Reserved";
+ break;
+ }
+
+ print_field("Privacy Mode: %s (0x%2.2x)", str, cmd->priv_mode);
+}
+
struct opcode_data {
uint16_t opcode;
int bit;
@@ -8427,7 +8450,9 @@ static const struct opcode_data opcode_table[] = {
{ 0x204d, 313, "LE Write RF Path Compensation",
le_write_rf_path_comp_cmd, 4, true,
status_rsp, 1, true },
- { 0x204e, 314, "LE Set Privacy Mode" },
+ { 0x204e, 314, "LE Set Privacy Mode",
+ le_set_priv_mode_cmd, 8, true,
+ status_rsp, 1, true },
{ }
};
--
2.9.3
next prev parent reply other threads:[~2017-06-06 9:41 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 9:40 [PATCH BlueZ 00/31] monitor: Bluetooth 5 HCI commands support Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 01/31] monitor: Add LE Enhanced Receiver Test decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 1/2] monitor: Add LE Set Extended Scan Parameters decoding Michał Narajowski
2017-06-08 8:38 ` Marcel Holtmann
2017-06-06 9:40 ` [PATCH BlueZ 02/31] monitor: Add LE Enhanced Transmitter Test decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 2/2] monitor: Add LE Set Extended Scan Enable decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 03/31] monitor: Add LE Set Advertising Set Random Address decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 04/31] monitor: Add LE Set Extended Advertising Parameters decoding Michał Narajowski
2017-06-08 8:44 ` Marcel Holtmann
2017-06-08 13:00 ` Szymon Janc
2017-06-06 9:40 ` [PATCH BlueZ 05/31] monitor: Add LE Set Extended Advertising Data decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 06/31] monitor: Add LE Set Extended Scan Response " Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 07/31] monitor: Add LE Set Extended Advertising Enable decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 08/31] monitor: Add LE Read Maximum Advertising Data Length decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 09/31] monitor: Add LE Read Number of Supported Advertising Sets decoding Michał Narajowski
2017-06-06 9:40 ` [PATCH BlueZ 10/31] monitor: Add LE Remove Advertising Set decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 11/31] monitor: Add LE Clear Advertising Sets decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 12/31] monitor: Add LE Set Periodic Advertising Parameters decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 13/31] monitor: Add LE Set Periodic Advertising Data decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 14/31] monitor: Add LE Set Periodic Advertising Enable decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 15/31] monitor: Add LE Set Extended Scan Parameters decoding Michał Narajowski
2017-06-06 9:46 ` Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 16/31] monitor: Add LE Set Extended Scan Enable decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 17/31] monitor: Add LE Extended Create Connection decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 18/31] monitor: Add LE Periodic Advertising Create Sync decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 19/31] monitor: Add LE Periodic Advertising Create Sync Cancel decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 20/31] monitor: Add LE Periodic Advertising Terminate Sync decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 21/31] monitor: Add LE Add Device To Periodic Advertiser List decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 22/31] monitor: Add LE Remove Device From " Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 23/31] monitor: Add LE Clear " Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 24/31] monitor: Add LE Read Periodic Advertiser List Size decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 25/31] monitor: Add LE Read Transmit Power decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 26/31] monitor: Add LE Read RF Path Compensation decoding Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 27/31] monitor: Add LE Write " Michał Narajowski
2017-06-06 9:41 ` Michał Narajowski [this message]
2017-06-06 9:41 ` [PATCH BlueZ 29/31] monitor: Add LE Extended Advertising Report Event decoding Michał Narajowski
2017-06-06 14:10 ` Łukasz Rymanowski
2017-06-06 9:41 ` [PATCH BlueZ 30/31] monitor: Add LE Advertising Set Terminated " Michał Narajowski
2017-06-06 9:41 ` [PATCH BlueZ 31/31] monitor: Add LE Scan Request Received " Michał Narajowski
2017-06-08 8:47 ` [PATCH BlueZ 00/31] monitor: Bluetooth 5 HCI commands support Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606094120.14541-31-michal.narajowski@codecoup.pl \
--to=michal.narajowski@codecoup.pl \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox