Hi!

Is bluetooth expected to work on n900?

It looks like lock init is missing somewhere:

[  402.901031] of_get_named_gpiod_flags: parsed
'bluetooth-wakeup-gpios' property of node
'/ocp@68000000/serial@4806c000/bluetooth[0]' - status (0)
[  403.042022] BUG: rwlock bad magic on CPU#0, kworker/u3:0/3898,
c34b8848
[  403.042053] CPU: 0 PID: 3898 Comm: kworker/u3:0 Tainted: G        W
4.13.0-rc1-12941-g013595c-dirty #92
[  403.042083] Hardware name: Nokia RX-51 board
[  403.042114] Workqueue: hci0 hci_power_on
[  403.042205] [<c010d5dc>] (unwind_backtrace) from [<c010ae18>]
(show_stack+0x10/0x14)
[  403.042327] [<c010ae18>] (show_stack) from [<c0154d74>]
(do_raw_read_lock+0x20/0x2c)
[  403.042358] [<c0154d74>] (do_raw_read_lock) from [<c04ea070>]
(hci_uart_tx_wakeup+0x14/0x84)
[  403.042419] [<c04ea070>] (hci_uart_tx_wakeup) from [<bf00089c>]
(nokia_setup+0x210/0x640 [hci_nokia])
[  403.042449] [<bf00089c>] (nokia_setup [hci_nokia]) from
[<c04ea6fc>] (hci_uart_setup+0x7c/0x15c)
[  403.042480] [<c04ea6fc>] (hci_uart_setup) from [<c063c1a0>]
(hci_dev_do_open+0x420/0x5a0)
[  403.042510] [<c063c1a0>] (hci_dev_do_open) from [<c063db40>]
(hci_power_on+0x30/0x228)
[  403.042541] [<c063db40>] (hci_power_on) from [<c013ad5c>]
(process_one_work+0x10c/0x330)
[  403.042572] [<c013ad5c>] (process_one_work) from [<c013b120>]
(worker_thread+0x168/0x498)
[  403.042602] [<c013b120>] (worker_thread) from [<c014035c>]
(kthread+0x10c/0x148)
[  403.042633] [<c014035c>] (kthread) from [<c01076b8>]
(ret_from_fork+0x14/0x3c)
root@n900:/my/modules#

If I put the driver built-in, firmware loading failed. But I can't get
it to "hciconfig up" phase even with driver being modular. .. that
worked at one point IIRC.

Best regards,
								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html