From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
To: "Frédéric Danis" <frederic.danis.oss@gmail.com>
Cc: robh@kernel.org, marcel@holtmann.org, loic.poulain@gmail.com,
johan@kernel.org, lukas@wunner.de, hdegoede@redhat.com,
linux-bluetooth@vger.kernel.org, linux-serial@vger.kernel.org,
linux-acpi@vger.kernel.org
Subject: Re: [PATCH 2/2] ACPI / scan: Fix enumeration for special UART devices
Date: Sat, 7 Oct 2017 13:36:00 +0200 [thread overview]
Message-ID: <20171007113600.5r5niw3uhwbvytud@earth> (raw)
In-Reply-To: <1507107090-15992-3-git-send-email-frederic.danis.oss@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 5191 bytes --]
Hi,
On Wed, Oct 04, 2017 at 10:51:30AM +0200, Frédéric Danis wrote:
> UART devices is expected to be enumerated by SerDev subsystem.
>
> During ACPI scan, serial devices behind SPI, I2C or UART buses are not
> enumerated, allowing them to be enumerated by their respective parents.
>
> Rename *spi_i2c_slave* to *serial_bus_slave* as this will be used for serial
> devices on serial buses (SPI, I2C or UART).
>
> On Macs an empty ResourceTemplate is returned for uart slaves.
> Instead the device properties "baud", "parity", "dataBits", "stopBits" are
> provided. Add a check for "baud" in acpi_is_serial_bus_slave().
>
> Signed-off-by: Frédéric Danis <frederic.danis.oss@gmail.com>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-- Sebastian
> drivers/acpi/scan.c | 37 +++++++++++++++++--------------------
> include/acpi/acpi_bus.h | 2 +-
> 2 files changed, 18 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 602f8ff..860b698 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1505,41 +1505,38 @@ static void acpi_init_coherency(struct acpi_device *adev)
> adev->flags.coherent_dma = cca;
> }
>
> -static int acpi_check_spi_i2c_slave(struct acpi_resource *ares, void *data)
> +static int acpi_check_serial_bus_slave(struct acpi_resource *ares, void *data)
> {
> - bool *is_spi_i2c_slave_p = data;
> + bool *is_serial_bus_slave_p = data;
>
> if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
> return 1;
>
> - /*
> - * devices that are connected to UART still need to be enumerated to
> - * platform bus
> - */
> - if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART)
> - *is_spi_i2c_slave_p = true;
> + *is_serial_bus_slave_p = true;
>
> /* no need to do more checking */
> return -1;
> }
>
> -static bool acpi_is_spi_i2c_slave(struct acpi_device *device)
> +static bool acpi_is_serial_bus_slave(struct acpi_device *device)
> {
> struct list_head resource_list;
> - bool is_spi_i2c_slave = false;
> + bool is_serial_bus_slave = false;
>
> /* Macs use device properties in lieu of _CRS resources */
> if (x86_apple_machine &&
> (fwnode_property_present(&device->fwnode, "spiSclkPeriod") ||
> - fwnode_property_present(&device->fwnode, "i2cAddress")))
> + fwnode_property_present(&device->fwnode, "i2cAddress") ||
> + fwnode_property_present(&device->fwnode, "baud")))
> return true;
>
> INIT_LIST_HEAD(&resource_list);
> - acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave,
> - &is_spi_i2c_slave);
> + acpi_dev_get_resources(device, &resource_list,
> + acpi_check_serial_bus_slave,
> + &is_serial_bus_slave);
> acpi_dev_free_resource_list(&resource_list);
>
> - return is_spi_i2c_slave;
> + return is_serial_bus_slave;
> }
>
> void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
> @@ -1557,7 +1554,7 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
> acpi_bus_get_flags(device);
> device->flags.match_driver = false;
> device->flags.initialized = true;
> - device->flags.spi_i2c_slave = acpi_is_spi_i2c_slave(device);
> + device->flags.serial_bus_slave = acpi_is_serial_bus_slave(device);
> acpi_device_clear_enumerated(device);
> device_initialize(&device->dev);
> dev_set_uevent_suppress(&device->dev, true);
> @@ -1841,10 +1838,10 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
> static void acpi_default_enumeration(struct acpi_device *device)
> {
> /*
> - * Do not enumerate SPI/I2C slaves as they will be enumerated by their
> - * respective parents.
> + * Do not enumerate SPI/I2C/UART slaves as they will be enumerated by
> + * their respective parents.
> */
> - if (!device->flags.spi_i2c_slave) {
> + if (!device->flags.serial_bus_slave) {
> acpi_create_platform_device(device, NULL);
> acpi_device_set_enumerated(device);
> } else {
> @@ -1941,7 +1938,7 @@ static void acpi_bus_attach(struct acpi_device *device)
> return;
>
> device->flags.match_driver = true;
> - if (ret > 0 && !device->flags.spi_i2c_slave) {
> + if (ret > 0 && !device->flags.serial_bus_slave) {
> acpi_device_set_enumerated(device);
> goto ok;
> }
> @@ -1950,7 +1947,7 @@ static void acpi_bus_attach(struct acpi_device *device)
> if (ret < 0)
> return;
>
> - if (!device->pnp.type.platform_id && !device->flags.spi_i2c_slave)
> + if (!device->pnp.type.platform_id && !device->flags.serial_bus_slave)
> acpi_device_set_enumerated(device);
> else
> acpi_default_enumeration(device);
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index fa15052..f849be2 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -211,7 +211,7 @@ struct acpi_device_flags {
> u32 of_compatible_ok:1;
> u32 coherent_dma:1;
> u32 cca_seen:1;
> - u32 spi_i2c_slave:1;
> + u32 serial_bus_slave:1;
> u32 reserved:19;
> };
>
> --
> 2.7.4
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2017-10-07 11:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-04 8:51 [PATCH 0/2] ACPI serdev support Frédéric Danis
2017-10-04 8:51 ` [PATCH 1/2] serdev: Add ACPI support Frédéric Danis
2017-10-06 12:33 ` Rob Herring
2017-10-06 18:32 ` Marcel Holtmann
2017-10-07 0:03 ` Rafael J. Wysocki
2017-10-07 0:31 ` Marcel Holtmann
2017-10-07 6:42 ` Greg Kroah-Hartman
2017-10-07 6:42 ` Greg KH
2017-10-07 11:35 ` Sebastian Reichel
2017-10-07 15:12 ` Johan Hovold
2017-10-10 8:10 ` Marcel Holtmann
2017-10-10 8:15 ` Johan Hovold
2017-10-10 8:22 ` Marcel Holtmann
2017-10-10 16:36 ` Johan Hovold
2017-10-10 23:13 ` Ian W MORRISON
2017-10-04 8:51 ` [PATCH 2/2] ACPI / scan: Fix enumeration for special UART devices Frédéric Danis
2017-10-07 11:36 ` Sebastian Reichel [this message]
2017-10-07 15:19 ` Johan Hovold
2017-10-07 22:53 ` Sebastian Reichel
2017-10-08 8:51 ` Marcel Holtmann
2017-10-09 8:59 ` Sebastian Reichel
2017-10-09 7:35 ` Johan Hovold
2017-10-09 8:55 ` Sebastian Reichel
2017-10-09 9:08 ` Johan Hovold
2017-10-09 18:09 ` Marcel Holtmann
2017-10-10 7:08 ` Johan Hovold
2017-10-05 15:21 ` [PATCH 0/2] ACPI serdev support Marcel Holtmann
2017-10-06 7:33 ` Ian W MORRISON
2017-10-06 8:16 ` Frédéric Danis
2017-10-06 14:47 ` Ian W MORRISON
2017-10-06 17:36 ` Frédéric Danis
2017-10-07 6:16 ` Ian W MORRISON
2017-10-07 15:14 ` Johan Hovold
2017-10-10 0:27 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171007113600.5r5niw3uhwbvytud@earth \
--to=sebastian.reichel@collabora.co.uk \
--cc=frederic.danis.oss@gmail.com \
--cc=hdegoede@redhat.com \
--cc=johan@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=loic.poulain@gmail.com \
--cc=lukas@wunner.de \
--cc=marcel@holtmann.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox