linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
	Jeremy Cline <jeremy@jcline.org>,
	linux-bluetooth@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-acpi@vger.kernel.org
Subject: [PATCH v3 4/9] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips
Date: Tue, 10 Jul 2018 10:11:12 +0200	[thread overview]
Message-ID: <20180710081117.25078-5-hdegoede@redhat.com> (raw)
In-Reply-To: <20180710081117.25078-1-hdegoede@redhat.com>

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

The Realtek RTL8723BS and RTL8723DS chipsets are SDIO wifi chips. They
also contain a Bluetooth module which is connected via UART to the host.

Realtek's userspace initialization tool (rtk_hciattach) differentiates
these two via the HCI version and revision returned by the
HCI_OP_READ_LOCAL_VERSION command.
Additionally we apply these checks only the for UART devices. Everything
else is assumed to be a "RTL8723B" which was originally supported by the
driver (communicating via USB).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2 (Hans de Goede)
-Fix some minor style issues / checkpatch warnings
---
 drivers/bluetooth/btrtl.c | 51 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 47 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 6c0d88d23d6d..8dacca64fe41 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -38,6 +38,8 @@
 
 #define IC_MATCH_FL_LMPSUBV	(1 << 0)
 #define IC_MATCH_FL_HCIREV	(1 << 1)
+#define IC_MATCH_FL_HCIVER	(1 << 2)
+#define IC_MATCH_FL_HCIBUS	(1 << 3)
 #define IC_INFO(lmps, hcir) \
 	.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV, \
 	.lmp_subver = (lmps), \
@@ -47,6 +49,8 @@ struct id_table {
 	__u16 match_flags;
 	__u16 lmp_subver;
 	__u16 hci_rev;
+	__u8 hci_ver;
+	__u8 hci_bus;
 	bool config_needed;
 	bool has_rom_version;
 	char *fw_name;
@@ -75,6 +79,18 @@ static const struct id_table ic_id_table[] = {
 	  .fw_name = "rtl_bt/rtl8723a_fw.bin",
 	  .cfg_name = NULL },
 
+	/* 8723BS */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
+			 IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8723B,
+	  .hci_rev = 0xb,
+	  .hci_ver = 6,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723bs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723bs_config.bin" },
+
 	/* 8723B */
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb),
 	  .config_needed = false,
@@ -89,6 +105,18 @@ static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8723d_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8723d_config.bin" },
 
+	/* 8723DS */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
+			 IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8723B,
+	  .hci_rev = 0xd,
+	  .hci_ver = 8,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723ds_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723ds_config.bin" },
+
 	/* 8821A */
 	{ IC_INFO(RTL_ROM_LMP_8821A, 0xa),
 	  .config_needed = false,
@@ -118,7 +146,8 @@ static const struct id_table ic_id_table[] = {
 	  .cfg_name = "rtl_bt/rtl8822b_config.bin" },
 	};
 
-static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev)
+static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
+					     u8 hci_ver, u8 hci_bus)
 {
 	int i;
 
@@ -129,6 +158,12 @@ static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev)
 		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) &&
 		    (ic_id_table[i].hci_rev != hci_rev))
 			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIVER) &&
+		    (ic_id_table[i].hci_ver != hci_ver))
+			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) &&
+		    (ic_id_table[i].hci_bus != hci_bus))
+			continue;
 
 		break;
 	}
@@ -481,6 +516,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev)
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *resp;
 	u16 hci_rev, lmp_subver;
+	u8 hci_ver;
 	int ret;
 
 	btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
@@ -501,14 +537,17 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev)
 		    resp->hci_ver, resp->hci_rev,
 		    resp->lmp_ver, resp->lmp_subver);
 
+	hci_ver = resp->hci_ver;
 	hci_rev = le16_to_cpu(resp->hci_rev);
 	lmp_subver = le16_to_cpu(resp->lmp_subver);
 	kfree_skb(skb);
 
-	btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev);
+	btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
+					    hdev->bus);
+
 	if (!btrtl_dev->ic_info) {
-		bt_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x",
-			   lmp_subver, hci_rev);
+		bt_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x",
+			   lmp_subver, hci_rev, hci_ver);
 		ret = -EINVAL;
 		goto err_free;
 	}
@@ -711,6 +750,10 @@ MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
-- 
2.17.1

  parent reply	other threads:[~2018-07-10  8:11 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-10  8:11 [PATCH v3 0/9] Bluetooth: Add RTL8723BS support Hans de Goede
2018-07-10  8:11 ` [PATCH v3 1/9] Bluetooth: btrtl: add MODULE_FIRMWARE declarations Hans de Goede
2018-07-10  8:11 ` [PATCH v3 2/9] Bluetooth: btrtl: split the device initialization into smaller parts Hans de Goede
2018-07-14 16:04   ` Marcel Holtmann
2018-07-10  8:11 ` [PATCH v3 3/9] Bluetooth: btrtl: add support for retrieving the UART settings Hans de Goede
2018-07-10  8:11 ` Hans de Goede [this message]
2018-07-14 16:09   ` [PATCH v3 4/9] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips Marcel Holtmann
2018-07-31 14:59     ` Hans de Goede
2018-07-10  8:11 ` [PATCH v3 5/9] Bluetooth: btrtl: Add support for a config filename postfix Hans de Goede
2018-07-14 16:06   ` Marcel Holtmann
2018-07-19 16:12     ` Hans de Goede
2018-07-10  8:11 ` [PATCH v3 6/9] Bluetooth: hci_h5: Add support for serdev enumerated devices Hans de Goede
2018-07-10  8:11 ` [PATCH v3 7/9] Bluetooth: hci_h5: Add vendor setup, open, and close callbacks Hans de Goede
2018-07-10 12:12   ` kbuild test robot
2018-07-10  8:11 ` [PATCH v3 8/9] Bluetooth: hci_h5: Add support for the RTL8723BS Hans de Goede
2018-07-10  8:11 ` [PATCH v3 9/9] Bluetooth: hci_h5: Add support for enable and device-wake GPIOs Hans de Goede
2018-07-11  1:24 ` [PATCH v3 0/9] Bluetooth: Add RTL8723BS support Ian W MORRISON

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180710081117.25078-5-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=jeremy@jcline.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=martin.blumenstingl@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).