[PATCH v1] Bluetooth: hci_qca: Enable the ldisc for ROME for x86 platforms.

[Balakrishna Godavarthi <bgodavar@codeaurora.org>]

When using btattach to setup Rome over ldisc we observed a crash
in qca_setup as it will try to access the serdev which is not
available in the ldisc proto. This patch will fix the crash by
support both the ldisc and serdev way in the qca hci_uart driver.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
 drivers/bluetooth/hci_qca.c | 47 ++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 237aea34b69f..0a5c98d46864 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -963,7 +963,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
-	struct qca_serdev *qcadev;
+	struct qca_serdev *qcadev = NULL;
 	struct sk_buff *skb;
 	u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
 
@@ -985,18 +985,19 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 	skb_queue_tail(&qca->txq, skb);
 	hci_uart_tx_wakeup(hu);
 
-	qcadev = serdev_device_get_drvdata(hu->serdev);
+	if (hu->serdev)
+		qcadev = serdev_device_get_drvdata(hu->serdev);
 
 	/* Wait for the baudrate change request to be sent */
-
 	while (!skb_queue_empty(&qca->txq))
 		usleep_range(100, 200);
 
-	serdev_device_wait_until_sent(hu->serdev,
-		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
+	if (hu->serdev)
+		serdev_device_wait_until_sent(hu->serdev,
+				msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
 
 	/* Give the controller time to process the request */
-	if (qcadev->btsoc_type == QCA_WCN3990)
+	if (qcadev && qcadev->btsoc_type == QCA_WCN3990)
 		msleep(10);
 	else
 		msleep(300);
@@ -1072,10 +1073,12 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
 
 static int qca_check_speeds(struct hci_uart *hu)
 {
-	struct qca_serdev *qcadev;
+	struct qca_serdev *qcadev = NULL;
 
-	qcadev = serdev_device_get_drvdata(hu->serdev);
-	if (qcadev->btsoc_type == QCA_WCN3990) {
+	if (hu->serdev)
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+
+	if (qcadev && qcadev->btsoc_type == QCA_WCN3990) {
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1091,7 +1094,7 @@ static int qca_check_speeds(struct hci_uart *hu)
 static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 {
 	unsigned int speed, qca_baudrate;
-	struct qca_serdev *qcadev;
+	struct qca_serdev *qcadev = NULL;
 	int ret = 0;
 
 	if (speed_type == QCA_INIT_SPEED) {
@@ -1106,8 +1109,10 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		/* Disable flow control for wcn3990 to deassert RTS while
 		 * changing the baudrate of chip and host.
 		 */
-		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->btsoc_type == QCA_WCN3990)
+		if (hu->serdev)
+			qcadev = serdev_device_get_drvdata(hu->serdev);
+
+		if (qcadev && qcadev->btsoc_type == QCA_WCN3990)
 			hci_uart_set_flow_control(hu, true);
 
 		qca_baudrate = qca_get_baudrate_value(speed);
@@ -1119,7 +1124,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		host_set_baudrate(hu, speed);
 
 error:
-		if (qcadev->btsoc_type == QCA_WCN3990)
+		if (qcadev && qcadev->btsoc_type == QCA_WCN3990)
 			hci_uart_set_flow_control(hu, false);
 	}
 
@@ -1181,11 +1186,15 @@ static int qca_setup(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 	struct qca_data *qca = hu->priv;
 	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
-	struct qca_serdev *qcadev;
+	struct qca_serdev *qcadev = NULL;
 	int ret;
 	int soc_ver = 0;
+	enum qca_btsoc_type btsoc_type = QCA_ROME;
 
-	qcadev = serdev_device_get_drvdata(hu->serdev);
+	if (hu->serdev) {
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		btsoc_type = qcadev->btsoc_type;
+	}
 
 	ret = qca_check_speeds(hu);
 	if (ret)
@@ -1194,7 +1203,7 @@ static int qca_setup(struct hci_uart *hu)
 	/* Patch downloading has to be done without IBS mode */
 	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 
-	if (qcadev->btsoc_type == QCA_WCN3990) {
+	if (qcadev && btsoc_type == QCA_WCN3990) {
 		bt_dev_info(hdev, "setting up wcn3990");
 
 		/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
@@ -1225,7 +1234,7 @@ static int qca_setup(struct hci_uart *hu)
 		qca_baudrate = qca_get_baudrate_value(speed);
 	}
 
-	if (qcadev->btsoc_type != QCA_WCN3990) {
+	if (btsoc_type != QCA_WCN3990) {
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &soc_ver);
 		if (ret)
@@ -1234,7 +1243,7 @@ static int qca_setup(struct hci_uart *hu)
 
 	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
 	/* Setup patch / NVM configurations */
-	ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
+	ret = qca_uart_setup(hdev, qca_baudrate, btsoc_type, soc_ver);
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
@@ -1250,7 +1259,7 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	if (qcadev->btsoc_type == QCA_WCN3990)
+	if (btsoc_type == QCA_WCN3990)
 		hu->hdev->set_bdaddr = qca_set_bdaddr;
 	else
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project