linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
	Balakrishna Godavarthi <bgodavar@codeaurora.org>,
	Harish Bandi <c-hbandi@codeaurora.org>,
	Rocky Liao <rjliao@codeaurora.org>,
	Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH v3 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>
Date: Mon, 29 Apr 2019 16:21:30 -0700	[thread overview]
Message-ID: <20190429232131.183049-1-mka@chromium.org> (raw)

Rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IBS_ENABLED. The constant
represents a flag (multiple flags can be set at once), not a unique
state of the controller or driver.

Also make the flag an enum value instead of a pre-processor constant
(more flags will be added to the enum group by another patch).

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v3:
- rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IBS_ENABLED

Changes in v2:
- don't use BIT()
- change to enum type
- updated commit message
---
 drivers/bluetooth/hci_qca.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index c53ee8d8ca15..57322c42bb2d 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -54,9 +54,6 @@
 #define HCI_IBS_WAKE_ACK	0xFC
 #define HCI_MAX_IBS_SIZE	10
 
-/* Controller states */
-#define STATE_IN_BAND_SLEEP_ENABLED	1
-
 #define IBS_WAKE_RETRANS_TIMEOUT_MS	100
 #define IBS_TX_IDLE_TIMEOUT_MS		2000
 #define CMD_TRANS_TIMEOUT_MS		100
@@ -67,6 +64,10 @@
 /* Controller debug log header */
 #define QCA_DEBUG_HANDLE	0x2EDC
 
+enum qca_flags {
+	QCA_IBS_ENABLED,
+};
+
 /* HCI_IBS transmit side sleep protocol states */
 enum tx_ibs_states {
 	HCI_IBS_TX_ASLEEP,
@@ -792,7 +793,7 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 	/* Don't go to sleep in middle of patch download or
 	 * Out-Of-Band(GPIOs control) sleep is selected.
 	 */
-	if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
+	if (!test_bit(QCA_IBS_ENABLED, &qca->flags)) {
 		skb_queue_tail(&qca->txq, skb);
 		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
 		return 0;
@@ -1202,7 +1203,7 @@ static int qca_setup(struct hci_uart *hu)
 		return ret;
 
 	/* Patch downloading has to be done without IBS mode */
-	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+	clear_bit(QCA_IBS_ENABLED, &qca->flags);
 
 	if (qca_is_wcn399x(soc_type)) {
 		bt_dev_info(hdev, "setting up wcn3990");
@@ -1246,7 +1247,7 @@ static int qca_setup(struct hci_uart *hu)
 	/* Setup patch / NVM configurations */
 	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
 	if (!ret) {
-		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+		set_bit(QCA_IBS_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
 	} else if (ret == -ENOENT) {
 		/* No patch/nvm-config found, run with original fw/config */
@@ -1315,7 +1316,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
 	 * data in skb's.
 	 */
 	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
-	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+	clear_bit(QCA_IBS_ENABLED, &qca->flags);
 	qca_flush(hu);
 	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
 
-- 
2.21.0.593.g511ec345e18-goog


             reply	other threads:[~2019-04-29 23:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-29 23:21 Matthias Kaehlcke [this message]
2019-04-29 23:21 ` [PATCH v3 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event Matthias Kaehlcke
2019-04-29 23:31   ` Matthias Kaehlcke
2019-05-21 19:46   ` Matthias Kaehlcke
2019-04-30  7:44 ` [PATCH v3 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags> Balakrishna Godavarthi
2019-05-05 17:34 ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190429232131.183049-1-mka@chromium.org \
    --to=mka@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=c-hbandi@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=rjliao@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).