From: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
To: Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org,
Abhishek Pandit-Subedi <abhishekpandit@chromium.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] Bluetooth: btbcm: Support pcm configuration
Date: Tue, 5 Nov 2019 16:29:21 -0800 [thread overview]
Message-ID: <20191106002923.109344-3-abhishekpandit@chromium.org> (raw)
In-Reply-To: <20191106002923.109344-1-abhishekpandit@chromium.org>
Add BCM vendor specific commands to configure PCM.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
---
drivers/bluetooth/btbcm.c | 27 +++++++++++++++++++++++++++
drivers/bluetooth/btbcm.h | 12 ++++++++++++
2 files changed, 39 insertions(+)
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 2d2e6d862068..1b6afb11844a 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -105,6 +105,33 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
+int btbcm_set_pcm_params(struct hci_dev *hdev,
+ const struct bcm_set_pcm_int_params *int_params,
+ const struct bcm_set_pcm_format_params *format_params)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync(hdev, 0xfc1c, 5, int_params, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "BCM: Set PCM int params failed (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfc1e, 5, int_params, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "BCM: Set PCM data params failed (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_set_pcm_params);
+
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
const struct hci_command_hdr *cmd;
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index d204be8a84bf..4cc6769f6bfb 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -49,11 +49,16 @@ struct bcm_set_pcm_format_params {
__u8 right_justify;
} __packed;
+#define BCM_PCM_PARAMS_COUNT 10
+
#if IS_ENABLED(CONFIG_BT_BCM)
int btbcm_check_bdaddr(struct hci_dev *hdev);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
+int btbcm_set_pcm_params(struct hci_dev *hdev,
+ const struct bcm_set_pcm_int_params *int_params,
+ const struct bcm_set_pcm_format_params *format_params);
int btbcm_setup_patchram(struct hci_dev *hdev);
int btbcm_setup_apple(struct hci_dev *hdev);
@@ -74,6 +79,13 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
return -EOPNOTSUPP;
}
+int btbcm_set_pcm_params(struct hci_dev *hdev,
+ const struct bcm_set_pcm_int_params *int_params,
+ const struct bcm_set_pcm_format_params *format_params)
+{
+ return -EOPNOTSUPP;
+}
+
static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
return -EOPNOTSUPP;
--
2.24.0.rc1.363.gb1bccd3e3d-goog
next prev parent reply other threads:[~2019-11-06 0:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 0:29 [PATCH 0/4] Bluetooth: hci_bcm: Additional changes for BCM4354 support Abhishek Pandit-Subedi
2019-11-06 0:29 ` [PATCH 1/4] Bluetooth: hci_bcm: Disallow set_baudrate for BCM4354 Abhishek Pandit-Subedi
2019-11-06 0:29 ` Abhishek Pandit-Subedi [this message]
2019-11-06 0:29 ` [PATCH 3/4] Bluetooth: hci_bcm: Support pcm params in dts Abhishek Pandit-Subedi
2019-11-06 0:29 ` [PATCH 4/4] dt-bindings: net: bluetooth: update broadcom-bluetooth Abhishek Pandit-Subedi
2019-11-07 0:46 ` Rob Herring
2019-11-07 14:09 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2019-11-23 10:01 [PATCH 2/4] Bluetooth: btbcm: Support pcm configuration Marcel Holtmann
2019-11-25 18:14 ` Abhishek Pandit-Subedi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191106002923.109344-3-abhishekpandit@chromium.org \
--to=abhishekpandit@chromium.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).