[PATCH AUTOSEL 4.19 153/191] Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races

[PATCH AUTOSEL 4.19 153/191] Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races

[Sasha Levin]

From: Balakrishna Godavarthi <bgodavar@codeaurora.org>

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_serdev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index aa2543b3c2869..46e20444ba19b 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -368,6 +368,7 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 {
 	struct hci_dev *hdev = hu->hdev;
 
+	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 	hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 154/191] Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]

If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 260ef5426e0ca..974c1b8a689c1 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -6819,6 +6819,16 @@ static int l2cap_le_data_rcv(struct l2cap_chan *chan, struct sk_buff *skb)
 		chan->sdu_len = sdu_len;
 		chan->sdu_last_frag = skb;
 
+		/* Detect if remote is not able to use the selected MPS */
+		if (skb->len + L2CAP_SDULEN_SIZE < chan->mps) {
+			u16 mps_len = skb->len + L2CAP_SDULEN_SIZE;
+
+			/* Adjust the number of credits */
+			BT_DBG("chan->mps %u -> %u", chan->mps, mps_len);
+			chan->mps = mps_len;
+			l2cap_chan_le_send_credits(chan);
+		}
+
 		return 0;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 155/191] Bluetooth: btrsi: fix bt tx timeout issue

[Sasha Levin]

From: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>

[ Upstream commit 7cbfd1e2aad410d96fa6162aeb3f9cff1fecfc58 ]

observed sometimes data is coming with unaligned address from kernel
BT stack. If unaligned address is passed, some data in payload is
stripped when packet is loading to firmware and this results, BT
connection timeout is happening.

sh# hciconfig hci0 up
Can't init device hci0: hci0 command 0x0c03 tx timeout

Fixed this by moving the data to aligned address.

Signed-off-by: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btrsi.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
index 60d1419590bab..3951f7b238404 100644
--- a/drivers/bluetooth/btrsi.c
+++ b/drivers/bluetooth/btrsi.c
@@ -21,8 +21,9 @@
 #include <net/rsi_91x.h>
 #include <net/genetlink.h>
 
-#define RSI_HEADROOM_FOR_BT_HAL	16
+#define RSI_DMA_ALIGN	8
 #define RSI_FRAME_DESC_SIZE	16
+#define RSI_HEADROOM_FOR_BT_HAL	(RSI_FRAME_DESC_SIZE + RSI_DMA_ALIGN)
 
 struct rsi_hci_adapter {
 	void *priv;
@@ -70,6 +71,16 @@ static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
 		bt_cb(new_skb)->pkt_type = hci_skb_pkt_type(skb);
 		kfree_skb(skb);
 		skb = new_skb;
+		if (!IS_ALIGNED((unsigned long)skb->data, RSI_DMA_ALIGN)) {
+			u8 *skb_data = skb->data;
+			int skb_len = skb->len;
+
+			skb_push(skb, RSI_DMA_ALIGN);
+			skb_pull(skb, PTR_ALIGN(skb->data,
+						RSI_DMA_ALIGN) - skb->data);
+			memmove(skb->data, skb_data, skb_len);
+			skb_trim(skb, skb_len);
+		}
 	}
 
 	return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
-- 
2.20.1