From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sergey Shatunov <me@prok.pw>,
Marcel Holtmann <marcel@holtmann.org>,
Sasha Levin <sashal@kernel.org>,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 5.6 071/149] Bluetooth: btusb: Add support for 13d3:3548 Realtek 8822CE device
Date: Sat, 11 Apr 2020 19:02:28 -0400 [thread overview]
Message-ID: <20200411230347.22371-71-sashal@kernel.org> (raw)
In-Reply-To: <20200411230347.22371-1-sashal@kernel.org>
From: Sergey Shatunov <me@prok.pw>
[ Upstream commit eb3939e386ec8df6049697d388298590231ac79c ]
The ASUS FX505DV laptop contains RTL8822CE device with an
associated BT chip using a USB ID of 13d3:3548.
This patch add fw download support for it.
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3548 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f5924f3e8b8d8..fa207b7150128 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -387,6 +387,7 @@ static const struct usb_device_id blacklist_table[] = {
/* Additional Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK },
+ { USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK },
/* Silicon Wave based devices */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
--
2.20.1
next prev parent reply other threads:[~2020-04-11 23:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200411230347.22371-1-sashal@kernel.org>
2020-04-11 23:01 ` [PATCH AUTOSEL 5.6 030/149] Bluetooth: L2CAP: handle l2cap config request during open state Sasha Levin
2020-04-11 23:01 ` [PATCH AUTOSEL 5.6 037/149] Bluetooth: Fix calculation of SCO handle for packet processing Sasha Levin
2020-04-11 23:01 ` [PATCH AUTOSEL 5.6 041/149] Bluetooth: guard against controllers sending zero'd events Sasha Levin
2020-04-11 23:02 ` [PATCH AUTOSEL 5.6 043/149] Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991 Sasha Levin
2020-04-11 23:02 ` [PATCH AUTOSEL 5.6 045/149] Bluetooth: hci_qca: Not send vendor pre-shutdown command for QCA Rome Sasha Levin
2020-04-11 23:02 ` Sasha Levin [this message]
2020-04-11 23:02 ` [PATCH AUTOSEL 5.6 085/149] Bluetooth: hci_qca: Bug fixes while collecting controller memory dump Sasha Levin
2020-04-11 23:02 ` [PATCH AUTOSEL 5.6 096/149] Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200411230347.22371-71-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=me@prok.pw \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).