From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH] Bluetooth: hci_sync: Add hci_le_create_conn_sync
Date: Tue, 7 Dec 2021 18:05:53 -0800 [thread overview]
Message-ID: <20211208020553.219387-1-luiz.dentz@gmail.com> (raw)
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds hci_le_create_conn_sync and make hci_le_connect use it instead
of queueing multiple commands which may conflict with the likes of
hci_update_passive_scan which uses hci_cmd_sync_queue.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
include/net/bluetooth/hci_core.h | 1 +
include/net/bluetooth/hci_sync.h | 4 +
net/bluetooth/hci_conn.c | 300 ++-----------------------------
net/bluetooth/hci_sync.c | 295 ++++++++++++++++++++++++++++++
4 files changed, 315 insertions(+), 285 deletions(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 4d69dcfebd63..c41ad7847d9d 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -646,6 +646,7 @@ struct hci_conn {
__u8 init_addr_type;
bdaddr_t resp_addr;
__u8 resp_addr_type;
+ bdaddr_t direct_rpa;
__u8 adv_instance;
__u16 handle;
__u16 state;
diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index f4034bf8f1ce..0d2a75d88e7c 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -101,3 +101,7 @@ int hci_stop_discovery_sync(struct hci_dev *hdev);
int hci_suspend_sync(struct hci_dev *hdev);
int hci_resume_sync(struct hci_dev *hdev);
+
+struct hci_conn;
+
+int hci_le_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index cd6e1cf7e396..a767f89ca86e 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -911,267 +911,45 @@ void hci_le_conn_failed(struct hci_conn *conn, u8 status)
hci_enable_advertising(hdev);
}
-static void create_le_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
+static void create_le_conn_complete(struct hci_dev *hdev, void *data, int err)
{
- struct hci_conn *conn;
+ struct hci_conn *conn = data;
hci_dev_lock(hdev);
- conn = hci_lookup_le_connect(hdev);
-
- if (hdev->adv_instance_cnt)
- hci_req_resume_adv_instances(hdev);
-
- if (!status) {
+ if (!err) {
hci_connect_le_scan_cleanup(conn);
goto done;
}
- bt_dev_err(hdev, "request failed to create LE connection: "
- "status 0x%2.2x", status);
+ bt_dev_err(hdev, "request failed to create LE connection: err %d", err);
if (!conn)
goto done;
- hci_le_conn_failed(conn, status);
+ hci_le_conn_failed(conn, err);
done:
hci_dev_unlock(hdev);
}
-static bool conn_use_rpa(struct hci_conn *conn)
-{
- struct hci_dev *hdev = conn->hdev;
-
- return hci_dev_test_flag(hdev, HCI_PRIVACY);
-}
-
-static void set_ext_conn_params(struct hci_conn *conn,
- struct hci_cp_le_ext_conn_param *p)
-{
- struct hci_dev *hdev = conn->hdev;
-
- memset(p, 0, sizeof(*p));
-
- p->scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
- p->scan_window = cpu_to_le16(hdev->le_scan_window_connect);
- p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
- p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
- p->conn_latency = cpu_to_le16(conn->le_conn_latency);
- p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
- p->min_ce_len = cpu_to_le16(0x0000);
- p->max_ce_len = cpu_to_le16(0x0000);
-}
-
-static void hci_req_add_le_create_conn(struct hci_request *req,
- struct hci_conn *conn,
- bdaddr_t *direct_rpa)
+static int hci_connect_le_sync(struct hci_dev *hdev, void *data)
{
- struct hci_dev *hdev = conn->hdev;
- u8 own_addr_type;
-
- /* If direct address was provided we use it instead of current
- * address.
- */
- if (direct_rpa) {
- if (bacmp(&req->hdev->random_addr, direct_rpa))
- hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
- direct_rpa);
-
- /* direct address is always RPA */
- own_addr_type = ADDR_LE_DEV_RANDOM;
- } else {
- /* Update random address, but set require_privacy to false so
- * that we never connect with an non-resolvable address.
- */
- if (hci_update_random_address(req, false, conn_use_rpa(conn),
- &own_addr_type))
- return;
- }
-
- if (use_ext_conn(hdev)) {
- struct hci_cp_le_ext_create_conn *cp;
- struct hci_cp_le_ext_conn_param *p;
- u8 data[sizeof(*cp) + sizeof(*p) * 3];
- u32 plen;
-
- cp = (void *) data;
- p = (void *) cp->data;
+ struct hci_conn *conn = data;
- memset(cp, 0, sizeof(*cp));
+ bt_dev_dbg(hdev, "conn %p", conn);
- bacpy(&cp->peer_addr, &conn->dst);
- cp->peer_addr_type = conn->dst_type;
- cp->own_addr_type = own_addr_type;
-
- plen = sizeof(*cp);
-
- if (scan_1m(hdev)) {
- cp->phys |= LE_SCAN_PHY_1M;
- set_ext_conn_params(conn, p);
-
- p++;
- plen += sizeof(*p);
- }
-
- if (scan_2m(hdev)) {
- cp->phys |= LE_SCAN_PHY_2M;
- set_ext_conn_params(conn, p);
-
- p++;
- plen += sizeof(*p);
- }
-
- if (scan_coded(hdev)) {
- cp->phys |= LE_SCAN_PHY_CODED;
- set_ext_conn_params(conn, p);
-
- plen += sizeof(*p);
- }
-
- hci_req_add(req, HCI_OP_LE_EXT_CREATE_CONN, plen, data);
-
- } else {
- struct hci_cp_le_create_conn cp;
-
- memset(&cp, 0, sizeof(cp));
-
- cp.scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
- cp.scan_window = cpu_to_le16(hdev->le_scan_window_connect);
-
- bacpy(&cp.peer_addr, &conn->dst);
- cp.peer_addr_type = conn->dst_type;
- cp.own_address_type = own_addr_type;
- cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
- cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
- cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
- cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
- cp.min_ce_len = cpu_to_le16(0x0000);
- cp.max_ce_len = cpu_to_le16(0x0000);
-
- hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
- }
-
- conn->state = BT_CONNECT;
- clear_bit(HCI_CONN_SCANNING, &conn->flags);
-}
-
-static void hci_req_directed_advertising(struct hci_request *req,
- struct hci_conn *conn)
-{
- struct hci_dev *hdev = req->hdev;
- u8 own_addr_type;
- u8 enable;
-
- if (ext_adv_capable(hdev)) {
- struct hci_cp_le_set_ext_adv_params cp;
- bdaddr_t random_addr;
-
- /* Set require_privacy to false so that the remote device has a
- * chance of identifying us.
- */
- if (hci_get_random_address(hdev, false, conn_use_rpa(conn), NULL,
- &own_addr_type, &random_addr) < 0)
- return;
-
- memset(&cp, 0, sizeof(cp));
-
- cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND);
- cp.own_addr_type = own_addr_type;
- cp.channel_map = hdev->le_adv_channel_map;
- cp.tx_power = HCI_TX_POWER_INVALID;
- cp.primary_phy = HCI_ADV_PHY_1M;
- cp.secondary_phy = HCI_ADV_PHY_1M;
- cp.handle = 0; /* Use instance 0 for directed adv */
- cp.own_addr_type = own_addr_type;
- cp.peer_addr_type = conn->dst_type;
- bacpy(&cp.peer_addr, &conn->dst);
-
- /* As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for
- * advertising_event_property LE_LEGACY_ADV_DIRECT_IND
- * does not supports advertising data when the advertising set already
- * contains some, the controller shall return erroc code 'Invalid
- * HCI Command Parameters(0x12).
- * So it is required to remove adv set for handle 0x00. since we use
- * instance 0 for directed adv.
- */
- __hci_req_remove_ext_adv_instance(req, cp.handle);
-
- hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(cp), &cp);
-
- if (own_addr_type == ADDR_LE_DEV_RANDOM &&
- bacmp(&random_addr, BDADDR_ANY) &&
- bacmp(&random_addr, &hdev->random_addr)) {
- struct hci_cp_le_set_adv_set_rand_addr cp;
-
- memset(&cp, 0, sizeof(cp));
-
- cp.handle = 0;
- bacpy(&cp.bdaddr, &random_addr);
-
- hci_req_add(req,
- HCI_OP_LE_SET_ADV_SET_RAND_ADDR,
- sizeof(cp), &cp);
- }
-
- __hci_req_enable_ext_advertising(req, 0x00);
- } else {
- struct hci_cp_le_set_adv_param cp;
-
- /* Clear the HCI_LE_ADV bit temporarily so that the
- * hci_update_random_address knows that it's safe to go ahead
- * and write a new random address. The flag will be set back on
- * as soon as the SET_ADV_ENABLE HCI command completes.
- */
- hci_dev_clear_flag(hdev, HCI_LE_ADV);
-
- /* Set require_privacy to false so that the remote device has a
- * chance of identifying us.
- */
- if (hci_update_random_address(req, false, conn_use_rpa(conn),
- &own_addr_type) < 0)
- return;
-
- memset(&cp, 0, sizeof(cp));
-
- /* Some controllers might reject command if intervals are not
- * within range for undirected advertising.
- * BCM20702A0 is known to be affected by this.
- */
- cp.min_interval = cpu_to_le16(0x0020);
- cp.max_interval = cpu_to_le16(0x0020);
-
- cp.type = LE_ADV_DIRECT_IND;
- cp.own_address_type = own_addr_type;
- cp.direct_addr_type = conn->dst_type;
- bacpy(&cp.direct_addr, &conn->dst);
- cp.channel_map = hdev->le_adv_channel_map;
-
- hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
-
- enable = 0x01;
- hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
- &enable);
- }
-
- conn->state = BT_CONNECT;
+ return hci_le_create_conn_sync(hdev, conn);
}
struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
u8 dst_type, bool dst_resolved, u8 sec_level,
u16 conn_timeout, u8 role, bdaddr_t *direct_rpa)
{
- struct hci_conn_params *params;
struct hci_conn *conn;
struct smp_irk *irk;
- struct hci_request req;
int err;
- /* This ensures that during disable le_scan address resolution
- * will not be disabled if it is followed by le_create_conn
- */
- bool rpa_le_conn = true;
-
/* Let's make sure that le is enabled.*/
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
if (lmp_le_capable(hdev))
@@ -1230,62 +1008,14 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
conn->sec_level = BT_SECURITY_LOW;
conn->conn_timeout = conn_timeout;
- hci_req_init(&req, hdev);
-
- /* Disable advertising if we're active. For central role
- * connections most controllers will refuse to connect if
- * advertising is enabled, and for peripheral role connections we
- * anyway have to disable it in order to start directed
- * advertising. Any registered advertisements will be
- * re-enabled after the connection attempt is finished.
- */
- if (hci_dev_test_flag(hdev, HCI_LE_ADV))
- __hci_req_pause_adv_instances(&req);
-
- /* If requested to connect as peripheral use directed advertising */
- if (conn->role == HCI_ROLE_SLAVE) {
- /* If we're active scanning most controllers are unable
- * to initiate advertising. Simply reject the attempt.
- */
- if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
- hdev->le_scan_type == LE_SCAN_ACTIVE) {
- hci_req_purge(&req);
- hci_conn_del(conn);
- return ERR_PTR(-EBUSY);
- }
+ if (direct_rpa)
+ bacpy(&conn->direct_rpa, direct_rpa);
- hci_req_directed_advertising(&req, conn);
- goto create_conn;
- }
-
- params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
- if (params) {
- conn->le_conn_min_interval = params->conn_min_interval;
- conn->le_conn_max_interval = params->conn_max_interval;
- conn->le_conn_latency = params->conn_latency;
- conn->le_supv_timeout = params->supervision_timeout;
- } else {
- conn->le_conn_min_interval = hdev->le_conn_min_interval;
- conn->le_conn_max_interval = hdev->le_conn_max_interval;
- conn->le_conn_latency = hdev->le_conn_latency;
- conn->le_supv_timeout = hdev->le_supv_timeout;
- }
-
- /* If controller is scanning, we stop it since some controllers are
- * not able to scan and connect at the same time. Also set the
- * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
- * handler for scan disabling knows to set the correct discovery
- * state.
- */
- if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
- hci_req_add_le_scan_disable(&req, rpa_le_conn);
- hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
- }
-
- hci_req_add_le_create_conn(&req, conn, direct_rpa);
+ conn->state = BT_CONNECT;
+ clear_bit(HCI_CONN_SCANNING, &conn->flags);
-create_conn:
- err = hci_req_run(&req, create_le_conn_complete);
+ err = hci_cmd_sync_queue(hdev, hci_connect_le_sync, conn,
+ create_le_conn_complete);
if (err) {
hci_conn_del(conn);
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 3d28ca7ebe45..90fbf293a30e 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -4976,3 +4976,298 @@ int hci_resume_sync(struct hci_dev *hdev)
return 0;
}
+
+static bool conn_use_rpa(struct hci_conn *conn)
+{
+ struct hci_dev *hdev = conn->hdev;
+
+ return hci_dev_test_flag(hdev, HCI_PRIVACY);
+}
+
+static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev,
+ struct hci_conn *conn)
+{
+ struct hci_cp_le_set_ext_adv_params cp;
+ int err;
+ bdaddr_t random_addr;
+ u8 own_addr_type;
+
+ err = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn),
+ &own_addr_type);
+ if (err)
+ return err;
+
+ /* Set require_privacy to false so that the remote device has a
+ * chance of identifying us.
+ */
+ err = hci_get_random_address(hdev, false, conn_use_rpa(conn), NULL,
+ &own_addr_type, &random_addr);
+ if (err)
+ return err;
+
+ memset(&cp, 0, sizeof(cp));
+
+ cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND);
+ cp.own_addr_type = own_addr_type;
+ cp.channel_map = hdev->le_adv_channel_map;
+ cp.tx_power = HCI_TX_POWER_INVALID;
+ cp.primary_phy = HCI_ADV_PHY_1M;
+ cp.secondary_phy = HCI_ADV_PHY_1M;
+ cp.handle = 0x00; /* Use instance 0 for directed adv */
+ cp.own_addr_type = own_addr_type;
+ cp.peer_addr_type = conn->dst_type;
+ bacpy(&cp.peer_addr, &conn->dst);
+
+ /* As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for
+ * advertising_event_property LE_LEGACY_ADV_DIRECT_IND
+ * does not supports advertising data when the advertising set already
+ * contains some, the controller shall return erroc code 'Invalid
+ * HCI Command Parameters(0x12).
+ * So it is required to remove adv set for handle 0x00. since we use
+ * instance 0 for directed adv.
+ */
+ err = hci_remove_ext_adv_instance_sync(hdev, cp.handle, NULL);
+ if (err)
+ return err;
+
+ err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS,
+ sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+ if (err)
+ return err;
+
+ /* Check if random address need to be updated */
+ if (own_addr_type == ADDR_LE_DEV_RANDOM &&
+ bacmp(&random_addr, BDADDR_ANY) &&
+ bacmp(&random_addr, &hdev->random_addr)) {
+ err = hci_set_adv_set_random_addr_sync(hdev, 0x00,
+ &random_addr);
+ if (err)
+ return err;
+ }
+
+ return hci_enable_ext_advertising_sync(hdev, 0x00);
+}
+
+static int hci_le_directed_advertising_sync(struct hci_dev *hdev,
+ struct hci_conn *conn)
+{
+ struct hci_cp_le_set_adv_param cp;
+ u8 status;
+ u8 own_addr_type;
+ u8 enable;
+
+ if (ext_adv_capable(hdev))
+ return hci_le_ext_directed_advertising_sync(hdev, conn);
+
+ /* Clear the HCI_LE_ADV bit temporarily so that the
+ * hci_update_random_address knows that it's safe to go ahead
+ * and write a new random address. The flag will be set back on
+ * as soon as the SET_ADV_ENABLE HCI command completes.
+ */
+ hci_dev_clear_flag(hdev, HCI_LE_ADV);
+
+ /* Set require_privacy to false so that the remote device has a
+ * chance of identifying us.
+ */
+ status = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn),
+ &own_addr_type);
+ if (status)
+ return status;
+
+ memset(&cp, 0, sizeof(cp));
+
+ /* Some controllers might reject command if intervals are not
+ * within range for undirected advertising.
+ * BCM20702A0 is known to be affected by this.
+ */
+ cp.min_interval = cpu_to_le16(0x0020);
+ cp.max_interval = cpu_to_le16(0x0020);
+
+ cp.type = LE_ADV_DIRECT_IND;
+ cp.own_address_type = own_addr_type;
+ cp.direct_addr_type = conn->dst_type;
+ bacpy(&cp.direct_addr, &conn->dst);
+ cp.channel_map = hdev->le_adv_channel_map;
+
+ status = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_PARAM,
+ sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+ if (status)
+ return status;
+
+ enable = 0x01;
+
+ return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_ENABLE,
+ sizeof(enable), &enable, HCI_CMD_TIMEOUT);
+}
+
+static void set_ext_conn_params(struct hci_conn *conn,
+ struct hci_cp_le_ext_conn_param *p)
+{
+ struct hci_dev *hdev = conn->hdev;
+
+ memset(p, 0, sizeof(*p));
+
+ p->scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
+ p->scan_window = cpu_to_le16(hdev->le_scan_window_connect);
+ p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
+ p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
+ p->conn_latency = cpu_to_le16(conn->le_conn_latency);
+ p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
+ p->min_ce_len = cpu_to_le16(0x0000);
+ p->max_ce_len = cpu_to_le16(0x0000);
+}
+
+int hci_le_ext_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn,
+ u8 own_addr_type)
+{
+ struct hci_cp_le_ext_create_conn *cp;
+ struct hci_cp_le_ext_conn_param *p;
+ u8 data[sizeof(*cp) + sizeof(*p) * 3];
+ u32 plen;
+
+ cp = (void *) data;
+ p = (void *) cp->data;
+
+ memset(cp, 0, sizeof(*cp));
+
+ bacpy(&cp->peer_addr, &conn->dst);
+ cp->peer_addr_type = conn->dst_type;
+ cp->own_addr_type = own_addr_type;
+
+ plen = sizeof(*cp);
+
+ if (scan_1m(hdev)) {
+ cp->phys |= LE_SCAN_PHY_1M;
+ set_ext_conn_params(conn, p);
+
+ p++;
+ plen += sizeof(*p);
+ }
+
+ if (scan_2m(hdev)) {
+ cp->phys |= LE_SCAN_PHY_2M;
+ set_ext_conn_params(conn, p);
+
+ p++;
+ plen += sizeof(*p);
+ }
+
+ if (scan_coded(hdev)) {
+ cp->phys |= LE_SCAN_PHY_CODED;
+ set_ext_conn_params(conn, p);
+
+ plen += sizeof(*p);
+ }
+
+ return __hci_cmd_sync_status(hdev, HCI_OP_LE_EXT_CREATE_CONN,
+ plen, data, HCI_CMD_TIMEOUT);
+}
+
+int hci_le_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn)
+{
+ struct hci_cp_le_create_conn cp;
+ struct hci_conn_params *params;
+ u8 own_addr_type;
+ int err;
+
+ /* Disable advertising if we're active. For central role
+ * connections most controllers will refuse to connect if
+ * advertising is enabled, and for peripheral role connections we
+ * anyway have to disable it in order to start directed
+ * advertising. Any registered advertisements will be
+ * re-enabled after the connection attempt is finished.
+ */
+ hci_pause_advertising_sync(hdev);
+
+ /* If requested to connect as peripheral use directed advertising */
+ if (conn->role == HCI_ROLE_SLAVE) {
+ /* If we're active scanning most controllers are unable
+ * to initiate advertising. Simply reject the attempt.
+ */
+ if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
+ hdev->le_scan_type == LE_SCAN_ACTIVE) {
+ hci_conn_del(conn);
+ return -EBUSY;
+ }
+
+ err = hci_le_directed_advertising_sync(hdev, conn);
+ goto done;
+ }
+
+ params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
+ if (params) {
+ conn->le_conn_min_interval = params->conn_min_interval;
+ conn->le_conn_max_interval = params->conn_max_interval;
+ conn->le_conn_latency = params->conn_latency;
+ conn->le_supv_timeout = params->supervision_timeout;
+ } else {
+ conn->le_conn_min_interval = hdev->le_conn_min_interval;
+ conn->le_conn_max_interval = hdev->le_conn_max_interval;
+ conn->le_conn_latency = hdev->le_conn_latency;
+ conn->le_supv_timeout = hdev->le_supv_timeout;
+ }
+
+ /* If direct address was provided we use it instead of current
+ * address.
+ */
+ if (bacmp(&conn->direct_rpa, BDADDR_ANY)) {
+ if (bacmp(&hdev->random_addr, &conn->direct_rpa)) {
+ err = __hci_cmd_sync_status(hdev,
+ HCI_OP_LE_SET_RANDOM_ADDR,
+ 6, &conn->direct_rpa,
+ HCI_CMD_TIMEOUT);
+ if (err)
+ return err;
+ }
+
+ /* direct address is always RPA */
+ own_addr_type = ADDR_LE_DEV_RANDOM;
+ } else {
+ /* Update random address, but set require_privacy to false so
+ * that we never connect with an non-resolvable address.
+ */
+ err = hci_update_random_address_sync(hdev, false,
+ conn_use_rpa(conn),
+ &own_addr_type);
+ if (err)
+ return err;
+ }
+
+ /* If controller is scanning, we stop it since some controllers are
+ * not able to scan and connect at the same time. Also set the
+ * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
+ * handler for scan disabling knows to set the correct discovery
+ * state.
+ */
+ if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
+ hci_scan_disable_sync(hdev);
+ hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
+ }
+
+ if (use_ext_conn(hdev)) {
+ err = hci_le_ext_create_conn_sync(hdev, conn, own_addr_type);
+ goto done;
+ }
+
+ memset(&cp, 0, sizeof(cp));
+
+ cp.scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
+ cp.scan_window = cpu_to_le16(hdev->le_scan_window_connect);
+
+ bacpy(&cp.peer_addr, &conn->dst);
+ cp.peer_addr_type = conn->dst_type;
+ cp.own_address_type = own_addr_type;
+ cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
+ cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
+ cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
+ cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
+ cp.min_ce_len = cpu_to_le16(0x0000);
+ cp.max_ce_len = cpu_to_le16(0x0000);
+
+ err = __hci_cmd_sync_status(hdev, HCI_OP_LE_CREATE_CONN,
+ sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+
+done:
+ hci_resume_advertising_sync(hdev);
+ return err;
+}
--
2.33.1
next reply other threads:[~2021-12-08 2:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-08 2:05 Luiz Augusto von Dentz [this message]
2021-12-08 6:12 ` [PATCH] Bluetooth: hci_sync: Add hci_le_create_conn_sync kernel test robot
2021-12-08 6:32 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208020553.219387-1-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox