[PATCH AUTOSEL 5.18 119/159] Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk

[PATCH AUTOSEL 5.18 119/159] Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 05abad857277dda198063017b00ba5b9fed2c0cb ]

This adds HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk which can be
used to mark HCI_Enhanced_Setup_Synchronous_Connection as broken even
if its support command bit are set since some controller report it as
supported but the command don't work properly with some configurations
(e.g. BT_VOICE_TRANSPARENT/mSBC).

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h      | 9 +++++++++
 include/net/bluetooth/hci_core.h | 8 ++++++--
 net/bluetooth/hci_conn.c         | 2 +-
 net/bluetooth/sco.c              | 2 +-
 4 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 69ef31cea582..62a9bb022aed 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -265,6 +265,15 @@ enum {
 	 * runtime suspend, because event filtering takes place there.
 	 */
 	HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL,
+
+	/*
+	 * When this quirk is set, disables the use of
+	 * HCI_OP_ENHANCED_SETUP_SYNC_CONN command to setup SCO connections.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN,
 };
 
 /* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 62d7b81b1cb7..5a52a2018b56 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1495,8 +1495,12 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 #define privacy_mode_capable(dev) (use_ll_privacy(dev) && \
 				   (hdev->commands[39] & 0x04))
 
-/* Use enhanced synchronous connection if command is supported */
-#define enhanced_sco_capable(dev) ((dev)->commands[29] & 0x08)
+/* Use enhanced synchronous connection if command is supported and its quirk
+ * has not been set.
+ */
+#define enhanced_sync_conn_capable(dev) \
+	(((dev)->commands[29] & 0x08) && \
+	 !test_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &(dev)->quirks))
 
 /* Use ext scanning if set ext scan param and ext scan enable is supported */
 #define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index fe803bee419a..882a7df13005 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -481,7 +481,7 @@ static bool hci_setup_sync_conn(struct hci_conn *conn, __u16 handle)
 
 bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
 {
-	if (enhanced_sco_capable(conn->hdev))
+	if (enhanced_sync_conn_capable(conn->hdev))
 		return hci_enhanced_setup_sync_conn(conn, handle);
 
 	return hci_setup_sync_conn(conn, handle);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8eabf41b2993..2a58c7d88433 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -885,7 +885,7 @@ static int sco_sock_setsockopt(struct socket *sock, int level, int optname,
 			err = -EBADFD;
 			break;
 		}
-		if (enhanced_sco_capable(hdev) &&
+		if (enhanced_sync_conn_capable(hdev) &&
 		    voice.setting == BT_VOICE_TRANSPARENT)
 			sco_pi(sk)->codec.id = BT_CODEC_TRANSPARENT;
 		hci_dev_put(hdev);
-- 
2.35.1

[PATCH AUTOSEL 5.18 120/159] Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCA

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit d44e1dbda36fff5d7c2586683c4adc0963aef908 ]

This sets HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCA controllers
since SCO appear to not work when using HCI_OP_ENHANCED_SETUP_SYNC_CONN.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215576
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 50df417207af..06a854a2507e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3335,6 +3335,11 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 			msleep(QCA_BT_RESET_WAIT_MS);
 	}
 
+	/* Mark HCI_OP_ENHANCED_SETUP_SYNC_CONN as broken as it doesn't seem to
+	 * work with the likes of HSP/HFP mSBC.
+	 */
+	set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
+
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.18 121/159] Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA

[Sasha Levin]

From: Zijun Hu <quic_zijuhu@quicinc.com>

[ Upstream commit 247f226adadfb7be09dd537f177429f4415aef8e ]

Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA controllers since
they answer HCI_OP_READ_DEF_ERR_DATA_REPORTING with error code
"UNKNOWN HCI COMMAND" as shown below:

[  580.517552] Bluetooth: hci0: unexpected cc 0x0c5a length: 1 < 2
[  580.517660] Bluetooth: hci0: Opcode 0x c5a failed: -38

hcitool -i hci0 cmd 0x03 0x5a
< HCI Command: ogf 0x03, ocf 0x005a, plen 0
> HCI Event: 0x0e plen 4
  01 5A 0C 01

btmon log:
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
> HCI Event: Command Complete (0x0e) plen 4
      Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
        Status: Unknown HCI Command (0x01)

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 06a854a2507e..e48c3ad069bb 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3339,6 +3339,7 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 	 * work with the likes of HSP/HFP mSBC.
 	 */
 	set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
+	set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
 
 	return 0;
 }
-- 
2.35.1