public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: <hildawu@realtek.com>
To: <marcel@holtmann.org>
Cc: <johan.hedberg@gmail.com>, <luiz.dentz@gmail.com>,
	<linux-bluetooth@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<apusaka@chromium.org>, <yinghsu@chromium.org>,
	<max.chou@realtek.com>, <alex_lu@realsil.com.cn>,
	<kidman@realtek.com>
Subject: [PATCH v2 2/3] Bluetooth: btusb: Workaround for spotty SCO quality
Date: Tue, 13 Sep 2022 18:02:43 +0800	[thread overview]
Message-ID: <20220913100244.23660-3-hildawu@realtek.com> (raw)
In-Reply-To: <20220913100244.23660-1-hildawu@realtek.com>

From: Hilda Wu <hildawu@realtek.com>

When streaming HFP, once a few minutes a brief pause in audio can be
heard on some platform with Realtek Bluetooth. When the issue occurs,
the system will see the SCO packet for unknown connection handle messages.

Note: This issue affects (e)SCO only, does not affect ACLs.
Because the duplicate packet causing the problem only occurs in Realtek BT.
This is to filter out duplicate packet for avoiding influence.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
Changes in v2:
 - Seperate commits for functions
---
---
 drivers/bluetooth/btrtl.c | 28 ++++++++++++++++++++++++++++
 drivers/bluetooth/btrtl.h |  8 ++++++++
 drivers/bluetooth/btusb.c | 14 ++++++++++++++
 3 files changed, 50 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index fb52313a1d45..15223b3ed94d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -781,6 +781,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 	case CHIP_ID_8852C:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+		btrealtek_set_flag(hdev, REALTEK_WBS_FILTER);
 		hci_set_aosp_capable(hdev);
 		break;
 	default:
@@ -937,6 +938,33 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btrtl_get_uart_settings);
 
+int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *p, int len,
+			u16 wMaxPacketSize)
+{
+	u8 *prev;
+
+	if (pos >= HCI_SCO_HDR_SIZE && pos >= wMaxPacketSize &&
+	    len == wMaxPacketSize && !(pos % wMaxPacketSize) &&
+	    wMaxPacketSize >= 10 && p[0] == data[0] && p[1] == data[1]) {
+		prev = data + (pos - wMaxPacketSize);
+
+		/* Detect the sco data of usb isoc pkt duplication. */
+		if (!memcmp(p + 2, prev + 2, 8))
+			return -EILSEQ;
+
+		if (wMaxPacketSize >= 12 &&
+		    p[2] == prev[6] && p[3] == prev[7] &&
+		    p[4] == prev[4] && p[5] == prev[5] &&
+		    p[6] == prev[10] && p[7] == prev[11] &&
+		    p[8] == prev[8] && p[9] == prev[9]) {
+			return -EILSEQ;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btrtl_usb_recv_isoc);
+
 MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index e2c99684799a..79e93a8b229f 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -84,6 +84,8 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
 			    struct btrtl_device_info *btrtl_dev,
 			    unsigned int *controller_baudrate,
 			    u32 *device_baudrate, bool *flow_control);
+int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *buffer, int len,
+				u16 wMaxPacketSize);
 
 #else
 
@@ -127,4 +129,10 @@ static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
 	return -ENOENT;
 }
 
+static inline int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *buffer, int len,
+				  u16 wMaxPacketSize)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4c3aed89ff05..8e595e03655a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -961,6 +961,7 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
 	struct sk_buff *skb;
 	unsigned long flags;
 	int err = 0;
+	u16 wMaxPacketSize = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize);
 
 	spin_lock_irqsave(&data->rxlock, flags);
 	skb = data->sco_skb;
@@ -980,6 +981,19 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
 		}
 
 		len = min_t(uint, hci_skb_expect(skb), count);
+
+		/* Gaps in audio could be heard while streaming WBS using USB
+		 * alt settings 3 on some platforms, since this is only used
+		 * with RTK chips so let vendor function detect it.
+		 */
+		if (test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags) &&
+			btrealtek_test_flag(data->hdev, REALTEK_WBS_FILTER)) {
+			err = btrtl_usb_recv_isoc(skb->len, skb->data, buffer,
+							len, wMaxPacketSize);
+			if (err)
+				break;
+		}
+
 		skb_put_data(skb, buffer, len);
 
 		count -= len;
-- 
2.17.1


  parent reply	other threads:[~2022-09-13 10:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-13 10:02 [PATCH v2 0/3] Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips hildawu
2022-09-13 10:02 ` [PATCH v2 1/3] Bluetooth: btrtl: Add btrealtek data struct hildawu
2022-09-13 11:11   ` Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips bluez.test.bot
2022-09-13 10:02 ` hildawu [this message]
2022-09-14 21:37   ` [PATCH v2 2/3] Bluetooth: btusb: Workaround for spotty SCO quality Luiz Augusto von Dentz
2022-09-13 10:02 ` [PATCH v2 3/3] Bluetooth: btsub: Ignore zero length of USB packets on ALT 6 for the specific chip model of Realtek devices hildawu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220913100244.23660-3-hildawu@realtek.com \
    --to=hildawu@realtek.com \
    --cc=alex_lu@realsil.com.cn \
    --cc=apusaka@chromium.org \
    --cc=johan.hedberg@gmail.com \
    --cc=kidman@realtek.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=max.chou@realtek.com \
    --cc=yinghsu@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox