[RFC v2 03/12] doc: Add set-api

[Luiz Augusto von Dentz <luiz.dentz@gmail.com>]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds set-api.rst which documents DeviceSet interface.
---
 doc/set-api.rst | 53 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 doc/set-api.rst

diff --git a/doc/set-api.rst b/doc/set-api.rst
new file mode 100644
index 000000000000..c49be1ae0514
--- /dev/null
+++ b/doc/set-api.rst
@@ -0,0 +1,53 @@
+=====================================
+BlueZ D-Bus DeviceSet API description
+=====================================
+
+
+DeviceSet interface
+===================
+
+Service		org.bluez
+Interface	org.bluez.DeviceSet1
+Object path	[variable prefix]/{hci0,hci1,...}/set_{sirk}
+
+Methods
+=======
+
+**void Connect() [experimental]**
+
+	Connects all **devices** members of the set, each member is
+	connected in sequence as they were added/loaded following the
+	same proceedure as described in **Device1.Connect**.
+
+	Possible errors: org.bluez.Error.NotReady
+			 org.bluez.Error.Failed
+			 org.bluez.Error.InProgress
+			 org.bluez.Error.AlreadyConnected
+
+**void Disconnect() [experimental]**
+
+	Disconnects all **devices** members of the set, each member is
+	disconnected in sequence as they were connected following the
+	same proceedure as described in **Device1.Disconnect**.
+
+	Possible errors: org.bluez.Error.NotConnected
+
+Properties
+==========
+
+**object Adapter [readonly]**
+
+	The object path of the adapter the set belongs to.
+
+**bool AutoConnect [read-write, experimental]**
+
+	Indicates if the **devices** members of the set shall be automatically
+	connected once any of its members is connected.
+
+**array(object) Devices [ready-only, experimental]**
+
+	List of devices objects that are members of the set.
+
+**byte Size [read-only, experimental]**
+
+	Set members size.
-- 
2.39.2