From: Larry Finger <Larry.Finger@lwfinger.net>
To: Marcel Holtmann <marcel@holtmann.org>,
Gustavo Padovan <gustavo@padovan.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, Hilda Wu <hildawu@realtek.com>,
Larry Finger <Larry.Finger@lwfinger.net>
Subject: [PATCH 2/2] Bluetooth: Add device 13d3:3571 to device tables
Date: Thu, 23 Mar 2023 12:45:47 -0500 [thread overview]
Message-ID: <20230323174604.30088-2-Larry.Finger@lwfinger.net> (raw)
In-Reply-To: <20230323005203.19749-1-Larry.Finger@lwfinger.net>
This device is part of a Realtek RTW8852BE chip. The device table is as
follows:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3571 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
V2 - changed "bluetooth" to "Bluetooth" in the subject
Fixed the long line in the description
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 964aa5577c79..39ea0e007038 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -542,6 +542,8 @@ static const struct usb_device_id blacklist_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
--
2.40.0
next prev parent reply other threads:[~2023-03-23 17:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 0:52 [PATCH 0/2] Bluetooth: Two additional devices Larry Finger
2023-03-23 0:52 ` [PATCH 1/2] bluetooth: Add device 0bda:887b to device tables Larry Finger
2023-03-23 2:30 ` Bluetooth: Two additional devices bluez.test.bot
2023-03-23 0:52 ` [PATCH 2/2] bluetooth: Add device 13d3:3571 to device tables Larry Finger
2023-03-23 17:45 ` [PATCH v2 0/2] Bluetooth: Two additional devices Larry Finger
2023-03-23 17:45 ` [PATCH v2 1/2] Bluetooth: Add device 0bda:887b to device tables Larry Finger
2023-03-23 18:35 ` [v2,1/2] " bluez.test.bot
2023-03-28 21:00 ` [PATCH v2 1/2] " patchwork-bot+bluetooth
2023-03-23 17:45 ` Larry Finger [this message]
2023-03-23 18:16 ` [2/2] Bluetooth: Add device 13d3:3571 " bluez.test.bot
2023-03-28 21:00 ` [PATCH 2/2] " patchwork-bot+bluetooth
2023-03-28 21:00 ` [PATCH 0/2] Bluetooth: Two additional devices patchwork-bot+bluetooth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230323174604.30088-2-Larry.Finger@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=gustavo@padovan.org \
--cc=hildawu@realtek.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox