From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dorian Cruveiller <doriancruveiller@gmail.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.14 45/54] Bluetooth: btusb: Add new VID/PID for WCN785x
Date: Thu, 3 Apr 2025 15:02:00 -0400 [thread overview]
Message-ID: <20250403190209.2675485-45-sashal@kernel.org> (raw)
In-Reply-To: <20250403190209.2675485-1-sashal@kernel.org>
From: Dorian Cruveiller <doriancruveiller@gmail.com>
[ Upstream commit c7629ccfa175e16bb44a60c469214e1a6051f63d ]
Add VID 0489 & PID e10d for Qualcomm WCN785x USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e10d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a0fc465458b2f..2cfaee948bbe9 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -376,6 +376,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe0f3), .driver_info = BTUSB_QCA_WCN6855 |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe10d), .driver_info = BTUSB_QCA_WCN6855 |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x2c7c, 0x0130), .driver_info = BTUSB_QCA_WCN6855 |
--
2.39.5
next parent reply other threads:[~2025-04-03 19:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20250403190209.2675485-1-sashal@kernel.org>
2025-04-03 19:02 ` Sasha Levin [this message]
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 46/54] Bluetooth: btintel_pcie: Add device id of Whale Peak Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 47/54] Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 48/54] Bluetooth: hci_uart: fix race during initialization Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 49/54] Bluetooth: btusb: Add 2 HWIDs for MT7922 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 50/54] Bluetooth: hci_qca: use the power sequencer for wcn6750 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 51/54] Bluetooth: qca: simplify WCN399x NVM loading Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 52/54] Bluetooth: qca: add WCN3950 support Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 53/54] Bluetooth: Add quirk for broken READ_VOICE_SETTING Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 54/54] Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250403190209.2675485-45-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=doriancruveiller@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox