From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.14 52/54] Bluetooth: qca: add WCN3950 support
Date: Thu, 3 Apr 2025 15:02:07 -0400 [thread overview]
Message-ID: <20250403190209.2675485-52-sashal@kernel.org> (raw)
In-Reply-To: <20250403190209.2675485-1-sashal@kernel.org>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit d5712c511cb358ab87f1e884848419ec76a67ab2 ]
WCN3950 is another example of the WCN39xx BT/WiFI family of chips. It
requires different firmware files and has different current
requirements, so add it as a separate SoC type.
The firmware for these chips has been recently added to the
linux-firmware repository and will be a part of the upcoming release:
- qca/cmbtfw12.tlv
- qca/cmbtfw13.tlv
- qca/cmnv12.bin
- qca/cmnv13.bin
- qca/cmnv13s.bin
- qca/cmnv13t.bin
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btqca.c | 14 ++++++++++++++
drivers/bluetooth/btqca.h | 4 ++++
drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++
3 files changed, 43 insertions(+)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 7d6b02fe2040f..3d6778b95e005 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -816,6 +816,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
snprintf(config.fwname, sizeof(config.fwname), "qca/%s", rampatch_name);
} else {
switch (soc_type) {
+ case QCA_WCN3950:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/cmbtfw%02x.tlv", rom_ver);
+ break;
case QCA_WCN3990:
case QCA_WCN3991:
case QCA_WCN3998:
@@ -881,6 +885,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
}
} else {
switch (soc_type) {
+ case QCA_WCN3950:
+ if (le32_to_cpu(ver.soc_id) == QCA_WCN3950_SOC_ID_T)
+ variant = "t";
+ else if (le32_to_cpu(ver.soc_id) == QCA_WCN3950_SOC_ID_S)
+ variant = "u";
+
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/cmnv%02x%s.bin", rom_ver, variant);
+ break;
case QCA_WCN3990:
case QCA_WCN3991:
case QCA_WCN3998:
@@ -947,6 +960,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
* VsMsftOpCode.
*/
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 9d28c88002257..8f3c1b1c77b3d 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -41,6 +41,9 @@
#define QCA_WCN3991_SOC_ID 0x40014320
+#define QCA_WCN3950_SOC_ID_T 0x40074130
+#define QCA_WCN3950_SOC_ID_S 0x40075130
+
/* QCA chipset version can be decided by patch and SoC
* version, combination with upper 2 bytes from SoC
* and lower 2 bytes from patch will be used.
@@ -145,6 +148,7 @@ enum qca_btsoc_type {
QCA_INVALID = -1,
QCA_AR3002,
QCA_ROME,
+ QCA_WCN3950,
QCA_WCN3988,
QCA_WCN3990,
QCA_WCN3998,
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d2fd08aceb179..f2558506a02c7 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -623,6 +623,7 @@ static int qca_open(struct hci_uart *hu)
qcadev = serdev_device_get_drvdata(hu->serdev);
switch (qcadev->btsoc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1366,6 +1367,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
/* Give the controller time to process the request */
switch (qca_soc_type(hu)) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1452,6 +1454,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
static int qca_check_speeds(struct hci_uart *hu)
{
switch (qca_soc_type(hu)) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1494,6 +1497,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
* changing the baudrate of chip and host.
*/
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1528,6 +1532,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
error:
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1746,6 +1751,7 @@ static int qca_regulator_init(struct hci_uart *hu)
}
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1776,6 +1782,7 @@ static int qca_regulator_init(struct hci_uart *hu)
qca_set_speed(hu, QCA_INIT_SPEED);
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1807,6 +1814,7 @@ static int qca_power_on(struct hci_dev *hdev)
return 0;
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1891,6 +1899,7 @@ static int qca_setup(struct hci_uart *hu)
soc_name = "qca2066";
break;
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1925,6 +1934,7 @@ static int qca_setup(struct hci_uart *hu)
clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -1958,6 +1968,7 @@ static int qca_setup(struct hci_uart *hu)
}
switch (soc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -2046,6 +2057,17 @@ static const struct hci_uart_proto qca_proto = {
.dequeue = qca_dequeue,
};
+static const struct qca_device_data qca_soc_data_wcn3950 __maybe_unused = {
+ .soc_type = QCA_WCN3950,
+ .vregs = (struct qca_vreg []) {
+ { "vddio", 15000 },
+ { "vddxo", 60000 },
+ { "vddrf", 155000 },
+ { "vddch0", 585000 },
+ },
+ .num_vregs = 4,
+};
+
static const struct qca_device_data qca_soc_data_wcn3988 __maybe_unused = {
.soc_type = QCA_WCN3988,
.vregs = (struct qca_vreg []) {
@@ -2338,6 +2360,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->btsoc_type = QCA_ROME;
switch (qcadev->btsoc_type) {
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -2375,6 +2398,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
break;
}
fallthrough;
+ case QCA_WCN3950:
case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
@@ -2683,6 +2707,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,qca6174-bt" },
{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
{ .compatible = "qcom,qca9377-bt" },
+ { .compatible = "qcom,wcn3950-bt", .data = &qca_soc_data_wcn3950},
{ .compatible = "qcom,wcn3988-bt", .data = &qca_soc_data_wcn3988},
{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
--
2.39.5
next prev parent reply other threads:[~2025-04-03 19:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20250403190209.2675485-1-sashal@kernel.org>
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 45/54] Bluetooth: btusb: Add new VID/PID for WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 46/54] Bluetooth: btintel_pcie: Add device id of Whale Peak Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 47/54] Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 48/54] Bluetooth: hci_uart: fix race during initialization Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 49/54] Bluetooth: btusb: Add 2 HWIDs for MT7922 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 50/54] Bluetooth: hci_qca: use the power sequencer for wcn6750 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 51/54] Bluetooth: qca: simplify WCN399x NVM loading Sasha Levin
2025-04-03 19:02 ` Sasha Levin [this message]
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 53/54] Bluetooth: Add quirk for broken READ_VOICE_SETTING Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 54/54] Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250403190209.2675485-52-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox