[PATCH] Bluetooth: bfusb: Fix buffer over-read in rx processing loop

[pip-izony <eeodqql09@gmail.com>]

From: Seungjin Bae <eeodqql09@gmail.com>

The bfusb_rx_complete() function parses incoming URB data in while loop.
The logic does not sufficiently validate the remaining buffer size(count)
accross loop iterations, which can lead to a buffer over-read.

For example, with 4-bytes remaining buffer, if the first iteration takes
the `hdr & 0x4000` branch, 2-bytes are consumed. On the next iteration,
only 2-bytes remain, but the else branch is trying to access the third
byte(buf[2]). This causes an out-of-bounds read and a potential kernel panic.

This patch fixes the vulnerability by adding checks to ensure enough
data remains in the buffer before it is accessed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
---
 drivers/bluetooth/bfusb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 8df310983bf6..f17eae6dbd7d 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -360,6 +360,10 @@ static void bfusb_rx_complete(struct urb *urb)
 			count -= 2;
 			buf   += 2;
 		} else {
+            if (count < 3) {
+                bf_dev_err(data->hdev, "block header is too short");
+                break;
+            }
 			len = (buf[2] == 0) ? 256 : buf[2];
 			count -= 3;
 			buf   += 3;
-- 
2.43.0