From: Max Chou <max.chou@realtek.com>
To: Marcel Holtmann <marcel@holtmann.org>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
<linux-bluetooth@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Hilda Wu <hildawu@realtek.com>, alex_lu <alex_lu@realsil.com.cn>,
<niall_ni@realsil.com.cn>, <zhu_qing@realsil.com.cn>,
Chih-Hsiang Wang <wangchihhs@realtek.com>, <brenda.li@ublnx.com>,
Max Chou <max.chou@realtek.com>
Subject: [PATCH] Bluetooth: btrtl: Add the support for RTL8761CUV
Date: Mon, 27 Oct 2025 16:10:44 +0800 [thread overview]
Message-ID: <20251027081044.11158-1-max.chou@realtek.com> (raw)
Add the support for RTL8761CUV BT controller on USB interface.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=c761 Rev= 2.00
S: Manufacturer=Realtek
S: Product=Bluetooth Controller
S: SerialNumber=10000
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btrtl.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 6abd962502e3..329554f23542 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -72,6 +72,7 @@ enum btrtl_chip_id {
CHIP_ID_8851B = 36,
CHIP_ID_8922A = 44,
CHIP_ID_8852BT = 47,
+ CHIP_ID_8761C = 51,
};
struct id_table {
@@ -230,6 +231,14 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8761bu_config",
.hw_info = "rtl8761bu" },
+ /* 8761CU */
+ { IC_INFO(RTL_ROM_LMP_8761A, 0x0e, 0xc, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8761cu_fw",
+ .cfg_name = "rtl_bt/rtl8761cu_config",
+ .hw_info = "rtl8761cu" },
+
/* 8822C with UART interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0x8, HCI_UART),
.config_needed = true,
@@ -668,6 +677,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
{ RTL_ROM_LMP_8851B, 36 }, /* 8851B */
{ RTL_ROM_LMP_8922A, 44 }, /* 8922A */
{ RTL_ROM_LMP_8852A, 47 }, /* 8852BT */
+ { RTL_ROM_LMP_8761A, 51 }, /* 8761C */
};
if (btrtl_dev->fw_len <= 8)
@@ -1301,6 +1311,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
case CHIP_ID_8851B:
case CHIP_ID_8922A:
case CHIP_ID_8852BT:
+ case CHIP_ID_8761C:
hci_set_quirk(hdev, HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED);
/* RTL8852C needs to transmit mSBC data continuously without
@@ -1520,6 +1531,8 @@ MODULE_FIRMWARE("rtl_bt/rtl8761b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761b_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8761cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8761cu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821c_fw.bin");
--
2.43.0
next reply other threads:[~2025-10-27 8:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-27 8:10 Max Chou [this message]
2025-10-27 8:41 ` Bluetooth: btrtl: Add the support for RTL8761CUV bluez.test.bot
[not found] <20251023070221.18657-1-max.chou@realtek.com>
2025-10-23 7:05 ` [PATCH] " Max Chou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251027081044.11158-1-max.chou@realtek.com \
--to=max.chou@realtek.com \
--cc=alex_lu@realsil.com.cn \
--cc=brenda.li@ublnx.com \
--cc=hildawu@realtek.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=niall_ni@realsil.com.cn \
--cc=wangchihhs@realtek.com \
--cc=zhu_qing@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).