[PATCH v1 0/3] Trigger reset if firmware status is abnormal when

[Chris Lu <chris.lu@mediatek.com>]

When the device unexpectedly restarts during previous firmware
download process, it can cause mt79xx firmware status to be
abnormal in the next attempt. In this case, a reset should be
performed to ensure everything starts afresh.

These changes include:
1. Optimizing the handling after the download function retry
   is exhausted, a reset should be performed.
2. Another download firmware command also needs to check status
   , and if an unexpected status occurs, trigger a reset.
3. Adding a flag "BTMTK_FIRMWARE_DL_RETRY": if download firmware
   process enters the reset mechanism, this flag will be set.
   After a successful setup, the flag will be cleared.
   If the flag is already set, no further reset attempts will be
   made to avoid endless reset retries.

Chris Lu (3):
  Bluetooth: btmtk: improve mt79xx firmware setup retry flow
  Bluetooth: btmtk: add status check in  mt79xx firmware setup
  Bluetooth: btmtk: Add reset mechanism if downloading firmware failed

 drivers/bluetooth/btmtk.c | 21 +++++++++++++++++++--
 drivers/bluetooth/btmtk.h |  1 +
 2 files changed, 20 insertions(+), 2 deletions(-)

-- 
2.45.2