* [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID
@ 2026-02-19 23:16 Sean Wang
2026-02-19 23:16 ` [PATCH 2/4] Bluetooth: btmtk: add MT7902 MCU support Sean Wang
` (5 more replies)
0 siblings, 6 replies; 11+ messages in thread
From: Sean Wang @ 2026-02-19 23:16 UTC (permalink / raw)
To: marcel, luiz.dentz, ulf.hansson
Cc: linux-bluetooth, linux-mediatek, linux-mmc, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
include/linux/mmc/sdio_ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 673cbdf43453..97cc834fb3d5 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -112,6 +112,7 @@
#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663
#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668
#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961
+#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a
#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296
#define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/4] Bluetooth: btmtk: add MT7902 MCU support
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
@ 2026-02-19 23:16 ` Sean Wang
2026-02-19 23:16 ` [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902 Sean Wang
` (4 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Sean Wang @ 2026-02-19 23:16 UTC (permalink / raw)
To: marcel, luiz.dentz, ulf.hansson
Cc: linux-bluetooth, linux-mediatek, linux-mmc, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add MT7902 device ID and firmware filename to enable MCU firmware
loading.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btmtk.c | 1 +
drivers/bluetooth/btmtk.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 14e2f4100806..2507d587f28a 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -1338,6 +1338,7 @@ int btmtk_usb_setup(struct hci_dev *hdev)
case 0x7922:
case 0x7925:
case 0x7961:
+ case 0x7902:
btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
fw_version, fw_flavor);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index b9df2b8f0627..adaf385626ee 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -5,6 +5,7 @@
#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
#define FIRMWARE_MT7922 "mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin"
+#define FIRMWARE_MT7902 "mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin"
#define FIRMWARE_MT7961 "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
#define FIRMWARE_MT7925 "mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
2026-02-19 23:16 ` [PATCH 2/4] Bluetooth: btmtk: add MT7902 MCU support Sean Wang
@ 2026-02-19 23:16 ` Sean Wang
2026-02-21 13:37 ` OnlineLearningTutorials
2026-02-22 15:21 ` Bitterblue Smith
2026-02-19 23:16 ` [PATCH 4/4] Bluetooth: btmtk: add MT7902 SDIO support Sean Wang
` (3 subsequent siblings)
5 siblings, 2 replies; 11+ messages in thread
From: Sean Wang @ 2026-02-19 23:16 UTC (permalink / raw)
To: marcel, luiz.dentz, ulf.hansson
Cc: linux-bluetooth, linux-mediatek, linux-mmc, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add VID 13d3 & PID 3633 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3579 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btusb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 247d6aff5e79..c8c50daec967 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -671,7 +671,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
-
+ { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
/* MediaTek MT7922 Bluetooth devices */
{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 4/4] Bluetooth: btmtk: add MT7902 SDIO support
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
2026-02-19 23:16 ` [PATCH 2/4] Bluetooth: btmtk: add MT7902 MCU support Sean Wang
2026-02-19 23:16 ` [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902 Sean Wang
@ 2026-02-19 23:16 ` Sean Wang
2026-02-19 23:28 ` [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Paul Menzel
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Sean Wang @ 2026-02-19 23:16 UTC (permalink / raw)
To: marcel, luiz.dentz, ulf.hansson
Cc: linux-bluetooth, linux-mediatek, linux-mmc, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add MT7902 Bluetooth SDIO support by introducing chip data and
registering the device ID.
Runtime PM is not yet supported by the driver, but normal operation
is unaffected.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btmtksdio.c | 42 ++++++++++++++++++++++++-----------
1 file changed, 29 insertions(+), 13 deletions(-)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index e986e5af51ae..042064464d34 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -42,24 +42,35 @@ struct btmtksdio_data {
const char *fwname;
u16 chipid;
bool lp_mbox_supported;
+ bool pm_runtime_supported;
};
static const struct btmtksdio_data mt7663_data = {
.fwname = FIRMWARE_MT7663,
.chipid = 0x7663,
.lp_mbox_supported = false,
+ .pm_runtime_supported = true,
};
static const struct btmtksdio_data mt7668_data = {
.fwname = FIRMWARE_MT7668,
.chipid = 0x7668,
.lp_mbox_supported = false,
+ .pm_runtime_supported = true,
};
static const struct btmtksdio_data mt7921_data = {
.fwname = FIRMWARE_MT7961,
.chipid = 0x7921,
.lp_mbox_supported = true,
+ .pm_runtime_supported = true,
+};
+
+static const struct btmtksdio_data mt7902_data = {
+ .fwname = FIRMWARE_MT7902,
+ .chipid = 0x7902,
+ .lp_mbox_supported = false,
+ .pm_runtime_supported = false,
};
static const struct sdio_device_id btmtksdio_table[] = {
@@ -69,6 +80,8 @@ static const struct sdio_device_id btmtksdio_table[] = {
.driver_data = (kernel_ulong_t)&mt7668_data },
{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7961),
.driver_data = (kernel_ulong_t)&mt7921_data },
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7902),
+ .driver_data = (kernel_ulong_t)&mt7902_data },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
@@ -1090,6 +1103,7 @@ static int btmtksdio_setup(struct hci_dev *hdev)
set_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state);
switch (bdev->data->chipid) {
+ case 0x7902:
case 0x7921:
if (test_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state)) {
err = btmtksdio_mtk_reg_read(hdev, MT7921_DLSTATUS,
@@ -1167,22 +1181,24 @@ static int btmtksdio_setup(struct hci_dev *hdev)
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long)ktime_to_ns(delta) >> 10;
- pm_runtime_set_autosuspend_delay(bdev->dev,
- MTKBTSDIO_AUTOSUSPEND_DELAY);
- pm_runtime_use_autosuspend(bdev->dev);
+ if (bdev->data->pm_runtime_supported) {
+ pm_runtime_set_autosuspend_delay(bdev->dev,
+ MTKBTSDIO_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(bdev->dev);
- err = pm_runtime_set_active(bdev->dev);
- if (err < 0)
- return err;
+ err = pm_runtime_set_active(bdev->dev);
+ if (err < 0)
+ return err;
- /* Default forbid runtime auto suspend, that can be allowed by
- * enable_autosuspend flag or the PM runtime entry under sysfs.
- */
- pm_runtime_forbid(bdev->dev);
- pm_runtime_enable(bdev->dev);
+ /* Default forbid runtime auto suspend, that can be allowed by
+ * enable_autosuspend flag or the PM runtime entry under sysfs.
+ */
+ pm_runtime_forbid(bdev->dev);
+ pm_runtime_enable(bdev->dev);
- if (enable_autosuspend)
- pm_runtime_allow(bdev->dev);
+ if (enable_autosuspend)
+ pm_runtime_allow(bdev->dev);
+ }
bt_dev_info(hdev, "Device setup in %llu usecs", duration);
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
` (2 preceding siblings ...)
2026-02-19 23:16 ` [PATCH 4/4] Bluetooth: btmtk: add MT7902 SDIO support Sean Wang
@ 2026-02-19 23:28 ` Paul Menzel
2026-02-20 18:30 ` Sean Wang
2026-02-19 23:57 ` [1/4] " bluez.test.bot
2026-02-23 13:18 ` [PATCH 1/4] " Ulf Hansson
5 siblings, 1 reply; 11+ messages in thread
From: Paul Menzel @ 2026-02-19 23:28 UTC (permalink / raw)
To: Sean Wang
Cc: marcel, luiz.dentz, ulf.hansson, linux-bluetooth, linux-mediatek,
linux-mmc, Sean Wang
Dear Sean,
Thank you for the patch.
Am 20.02.26 um 00:16 schrieb Sean Wang:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Tested how?
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> include/linux/mmc/sdio_ids.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
> index 673cbdf43453..97cc834fb3d5 100644
> --- a/include/linux/mmc/sdio_ids.h
> +++ b/include/linux/mmc/sdio_ids.h
> @@ -112,6 +112,7 @@
> #define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663
> #define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668
> #define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961
> +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a
Please sort it.
>
> #define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296
> #define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
Kind regards,
Paul
^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
` (3 preceding siblings ...)
2026-02-19 23:28 ` [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Paul Menzel
@ 2026-02-19 23:57 ` bluez.test.bot
2026-02-23 13:18 ` [PATCH 1/4] " Ulf Hansson
5 siblings, 0 replies; 11+ messages in thread
From: bluez.test.bot @ 2026-02-19 23:57 UTC (permalink / raw)
To: linux-bluetooth, sean.wang
[-- Attachment #1: Type: text/plain, Size: 5184 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1055716
---Test result---
Test Summary:
CheckPatch PENDING 0.46 seconds
GitLint PENDING 0.42 seconds
SubjectPrefix FAIL 0.62 seconds
BuildKernel PASS 25.91 seconds
CheckAllWarning PASS 28.56 seconds
CheckSparse WARNING 32.02 seconds
BuildKernel32 PASS 25.30 seconds
TestRunnerSetup PASS 565.25 seconds
TestRunner_l2cap-tester PASS 28.88 seconds
TestRunner_iso-tester FAIL 67.63 seconds
TestRunner_bnep-tester PASS 6.52 seconds
TestRunner_mgmt-tester FAIL 115.89 seconds
TestRunner_rfcomm-tester PASS 9.56 seconds
TestRunner_sco-tester FAIL 14.62 seconds
TestRunner_ioctl-tester PASS 10.54 seconds
TestRunner_mesh-tester FAIL 12.55 seconds
TestRunner_smp-tester PASS 8.84 seconds
TestRunner_userchan-tester PASS 6.77 seconds
IncrementalBuild PENDING 0.68 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
drivers/bluetooth/btmtk.c:1508:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1509:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1510:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1513:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1514:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1515:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1516:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1517:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1518:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4660:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4661:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4663:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4664:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4666:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4667:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4669:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4670:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4673:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1572:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1573:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1575:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1576:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1577:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1578:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1578:1: error: bad constant expression
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x7e/0x2b0
Total: 141, Passed: 141 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.110 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context at net/core/sock.c:3782
Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 2.687 seconds
Mesh - Send cancel - 2 Timed out 1.994 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID
2026-02-19 23:28 ` [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Paul Menzel
@ 2026-02-20 18:30 ` Sean Wang
0 siblings, 0 replies; 11+ messages in thread
From: Sean Wang @ 2026-02-20 18:30 UTC (permalink / raw)
To: Paul Menzel
Cc: marcel, luiz.dentz, ulf.hansson, linux-bluetooth, linux-mediatek,
linux-mmc, Sean Wang
Dear Paul,
On Thu, Feb 19, 2026 at 5:28 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Sean,
>
>
> Thank you for the patch.
>
> Am 20.02.26 um 00:16 schrieb Sean Wang:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
>
> Tested how?
Tested on real hardware with successful card detection, driver
initialization and the connectivity.
>
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> > include/linux/mmc/sdio_ids.h | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
> > index 673cbdf43453..97cc834fb3d5 100644
> > --- a/include/linux/mmc/sdio_ids.h
> > +++ b/include/linux/mmc/sdio_ids.h
> > @@ -112,6 +112,7 @@
> > #define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663
> > #define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668
> > #define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961
> > +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a
>
> Please sort it.
I will address the sorting in v2.
Thanks for the review.
>
> >
> > #define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296
> > #define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
>
>
> Kind regards,
>
> Paul
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
2026-02-19 23:16 ` [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902 Sean Wang
@ 2026-02-21 13:37 ` OnlineLearningTutorials
2026-02-21 20:27 ` Sean Wang
2026-02-22 15:21 ` Bitterblue Smith
1 sibling, 1 reply; 11+ messages in thread
From: OnlineLearningTutorials @ 2026-02-21 13:37 UTC (permalink / raw)
To: sean.wang
Cc: linux-bluetooth, linux-mediatek, linux-mmc, luiz.dentz, marcel,
sean.wang, ulf.hansson
Hi Sean,
Thanks for helping me to add driver for mt7902 chip.
I have checked the wifi driver for mt7902 and it is working correctly with new firmware,
earlier I have issue with old firmware, thanks.
For Bluetooth driver, you already added VID/PID 13d3/3579 for MT7902
There are some other VID/PID which are part of mt7902 bluetooth chip
13d3/3580 - (my chip)
13d3/3594 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/f94e0075ca04e50629852adbb567e130f8784873
13d3/3596 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/2a3db89c7a87241846d166defa17ebd22d4be337
Please add these VID/PID or instruct me to add,
below are device debug - cat /sys/kernel/debug/usb/devices
cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3580 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3594 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
cat /sys/kernel/debug/usb/devices
T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3596 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Thanks
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
2026-02-21 13:37 ` OnlineLearningTutorials
@ 2026-02-21 20:27 ` Sean Wang
0 siblings, 0 replies; 11+ messages in thread
From: Sean Wang @ 2026-02-21 20:27 UTC (permalink / raw)
To: OnlineLearningTutorials
Cc: linux-bluetooth, linux-mediatek, linux-mmc, luiz.dentz, marcel,
sean.wang, ulf.hansson
On Sat, Feb 21, 2026 at 7:38 AM OnlineLearningTutorials
<kush.kulshrestha5@gmail.com> wrote:
>
> Hi Sean,
>
> Thanks for helping me to add driver for mt7902 chip.
>
> I have checked the wifi driver for mt7902 and it is working correctly with new firmware,
> earlier I have issue with old firmware, thanks.
>
> For Bluetooth driver, you already added VID/PID 13d3/3579 for MT7902
> There are some other VID/PID which are part of mt7902 bluetooth chip
> 13d3/3580 - (my chip)
> 13d3/3594 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/f94e0075ca04e50629852adbb567e130f8784873
> 13d3/3596 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/2a3db89c7a87241846d166defa17ebd22d4be337
>
> Please add these VID/PID or instruct me to add,
Hi Kush,
Glad to hear Wi-Fi works with the new firmware.
I’ll add the additional Bluetooth VID/PIDs in the next version to make
the MT7902 chipset more accessible.
Appreciate the report and logs.
> below are device debug - cat /sys/kernel/debug/usb/devices
>
>
> cat /sys/kernel/debug/usb/devices
>
> T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3580 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
>
>
> cat /sys/kernel/debug/usb/devices
>
> T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3594 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
>
> cat /sys/kernel/debug/usb/devices
>
> T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3596 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
>
> Thanks
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
2026-02-19 23:16 ` [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902 Sean Wang
2026-02-21 13:37 ` OnlineLearningTutorials
@ 2026-02-22 15:21 ` Bitterblue Smith
1 sibling, 0 replies; 11+ messages in thread
From: Bitterblue Smith @ 2026-02-22 15:21 UTC (permalink / raw)
To: Sean Wang, marcel, luiz.dentz, ulf.hansson
Cc: linux-bluetooth, linux-mediatek, linux-mmc, Sean Wang
On 20/02/2026 01:16, Sean Wang wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Add VID 13d3 & PID 3633 for MediaTek MT7922 USB Bluetooth chip.
>
Hi, there is a copy paste error.
> The information in /sys/kernel/debug/usb/devices about the Bluetooth
> device is listed as the below.
>
> T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 7 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3579 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> drivers/bluetooth/btusb.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 247d6aff5e79..c8c50daec967 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -671,7 +671,8 @@ static const struct usb_device_id quirks_table[] = {
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK |
> BTUSB_WIDEBAND_SPEECH },
> -
> + { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK |
> + BTUSB_WIDEBAND_SPEECH },
> /* MediaTek MT7922 Bluetooth devices */
> { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
> BTUSB_WIDEBAND_SPEECH },
My MT7902 card bought from Aliexpress has a different USB ID: 0e8d 1ede.
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=1ede Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
` (4 preceding siblings ...)
2026-02-19 23:57 ` [1/4] " bluez.test.bot
@ 2026-02-23 13:18 ` Ulf Hansson
5 siblings, 0 replies; 11+ messages in thread
From: Ulf Hansson @ 2026-02-23 13:18 UTC (permalink / raw)
To: Sean Wang
Cc: marcel, luiz.dentz, linux-bluetooth, linux-mediatek, linux-mmc,
Sean Wang
On Fri, 20 Feb 2026 at 00:16, Sean Wang <sean.wang@kernel.org> wrote:
>
> From: Sean Wang <sean.wang@mediatek.com>
>
> Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
This should go along with the other patches, so I am not picking this
via my mmc tree.
With the sorting (pointed out by other reviewers) fixed, please add:
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
> ---
> include/linux/mmc/sdio_ids.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
> index 673cbdf43453..97cc834fb3d5 100644
> --- a/include/linux/mmc/sdio_ids.h
> +++ b/include/linux/mmc/sdio_ids.h
> @@ -112,6 +112,7 @@
> #define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663
> #define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668
> #define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961
> +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a
>
> #define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296
> #define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
> --
> 2.43.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2026-02-23 13:19 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-02-19 23:16 [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Sean Wang
2026-02-19 23:16 ` [PATCH 2/4] Bluetooth: btmtk: add MT7902 MCU support Sean Wang
2026-02-19 23:16 ` [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902 Sean Wang
2026-02-21 13:37 ` OnlineLearningTutorials
2026-02-21 20:27 ` Sean Wang
2026-02-22 15:21 ` Bitterblue Smith
2026-02-19 23:16 ` [PATCH 4/4] Bluetooth: btmtk: add MT7902 SDIO support Sean Wang
2026-02-19 23:28 ` [PATCH 1/4] mmc: sdio: add MediaTek MT7902 SDIO device ID Paul Menzel
2026-02-20 18:30 ` Sean Wang
2026-02-19 23:57 ` [1/4] " bluez.test.bot
2026-02-23 13:18 ` [PATCH 1/4] " Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox