[PATCH 02/12] power: sequencing: pcie-m2: Add support for 'is_fixed()' callback to 'uart' target

[Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.oss.qualcomm.com@kernel.org>]

From: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>

Add support for 'is_fixed()' callback to tell the consumers whether this
power sequencer target 'uart' is fixed or controllable. This is decided
based on the availability of the 'W_DISABLE2#' GPIO in DT.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
---
 drivers/power/sequencing/pwrseq-pcie-m2.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/power/sequencing/pwrseq-pcie-m2.c b/drivers/power/sequencing/pwrseq-pcie-m2.c
index ef69ae268059..2b79f2e34079 100644
--- a/drivers/power/sequencing/pwrseq-pcie-m2.c
+++ b/drivers/power/sequencing/pwrseq-pcie-m2.c
@@ -121,10 +121,18 @@ static int pwrseq_pcie_m2_e_pwup_delay(struct pwrseq_device *pwrseq)
 	return 0;
 }
 
+static bool pwrseq_pcie_m2_e_uart_is_fixed(struct pwrseq_device *pwrseq)
+{
+	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+	return !ctx->w_disable2_gpio;
+}
+
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_uart_target_data = {
 	.name = "uart",
 	.unit = &pwrseq_pcie_m2_e_uart_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
+	.is_fixed = pwrseq_pcie_m2_e_uart_is_fixed,
 };
 
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_pcie_target_data = {

-- 
2.51.0