[PATCH] Bluetooth: btusb: Add IMC Networks MT7922 device 0x13d3:0x3625

[monesss315 <monesss315@gmail.com>]

From: Gustavo Evgucci <monesss315@gmail.com>

The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not
recognized as a MediaTek device because it is missing from the btusb
device ID table. As a result, btmtk firmware loading is never triggered
and the HCI reset command times out with -ETIMEDOUT.

Add the device with BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH flags,
consistent with the neighboring 13d3:3627, 13d3:3628 and 13d3:3630
entries which use the same chip.

Tested on: MediaTek MT7922 (Wi-Fi 6E combo card, IMC Networks BT USB
interface), kernel 7.0.11-arch1-1.

Signed-off-by: Gustavo Evgucci <monesss315@gmail.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -755,6 +755,8 @@ static const struct usb_device_id btusb_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3613), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3625), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3627), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
-- 
2.x.x