[PATCH v3 06/11] Bluetooth: hci_qca: Set 'bt_en_available' based on pwrseq power controllability

[Loic Poulain <loic.poulain@oss.qualcomm.com>]

A Bluetooth device only needs the non-persistent setup if the host can
gate its power, so that it is actually reset on the next power-on. When the
power is controlled by a power sequencer, whether the host can gate it
depends on the hardware wiring, e.g. the presence of the BT_EN or
W_DISABLE2# line.

Query the generic pwrseq_power_is_controllable() helper whenever the BT
power comes from a sequencer, regardless of which provider it is (M2,
WCN, ...). If the power is not controllable, clear 'bt_en_available' so
that HCI_QUIRK_NON_PERSISTENT_SETUP is not set.

This is based on Manivannan's original patch that keyed the decision off
the W_DISABLE2# device tree property, it now uses the generic pwrseq helper
and handles the always-on case.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
 drivers/bluetooth/hci_qca.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 17f436484e1e74d1dd690ada22134315abb767c4..4a1ef316e715f4f1f0c8f7deafa971887af040f3 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2549,6 +2549,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		}
 	}
 	
+	if (qcadev->bt_power->pwrseq) {
+		bt_en_available = pwrseq_power_is_controllable(qcadev->bt_power->pwrseq);
+		if (!bt_en_available) {
+			/* The host cannot gate the BT power individually.
+			 * Treat it as always-on and drop the pwrseq handle.
+			 */
+			pwrseq_power_on(qcadev->bt_power->pwrseq);
+			qcadev->bt_power->pwrseq = NULL;
+		}
+	}
+
 	err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
 	if (err) {
 		BT_ERR("serdev registration failed");

-- 
2.34.1