[PATCH 05/11] Bluetooth: btusb: Add a simple static btusb_prepare_reset()

[Zijun Hu <zijun.hu@oss.qualcomm.com>]

Add btusb_prepare_reset() to do cleanup before a reset, and
apply it to btusb_mtk_reset() as well.

Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
---
Previous version:
https://lore.kernel.org/all/20260713-btusb_prep_qcc2072-v2-5-bbcb651285f2@oss.qualcomm.com

Changes since previous version:
- Improve commit title and message.
---
 drivers/bluetooth/btusb.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2ea1d6bbea39..90336dec59a2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2069,16 +2069,24 @@ static void btusb_stop_traffic(struct btusb_data *data)
 {
 	usb_kill_anchored_urbs(&data->intr_anchor);
 	usb_kill_anchored_urbs(&data->bulk_anchor);
 	usb_kill_anchored_urbs(&data->isoc_anchor);
 	usb_kill_anchored_urbs(&data->diag_anchor);
 	usb_kill_anchored_urbs(&data->ctrl_anchor);
 }
 
+static void btusb_prepare_reset(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+}
+
 static int btusb_close(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	int err;
 
 	BT_DBG("%s", hdev->name);
 
 	cancel_delayed_work(&data->rx_work);
@@ -2913,18 +2921,17 @@ static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
 
 	err = usb_autopm_get_interface(data->intf);
 	if (err < 0)
 		return err;
 
 	/* Release MediaTek ISO data interface */
 	btusb_mtk_release_iso_intf(hdev);
 
-	btusb_stop_traffic(data);
-	usb_kill_anchored_urbs(&data->tx_anchor);
+	btusb_prepare_reset(hdev);
 
 	/* Toggle the hard reset line. The MediaTek device is going to
 	 * yank itself off the USB and then replug. The cleanup is handled
 	 * correctly on the way out (standard USB disconnect), and the new
 	 * device is detected cleanly and bound to the driver again like
 	 * it should be.
 	 */
 	if (data->reset_gpio) {

-- 
2.34.1