Linux bluetooth development
 help / color / mirror / Atom feed
From: Chengfeng Ye <nicoyip.dev@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
	Chengfeng Ye <nicoyip.dev@gmail.com>,
	stable@vger.kernel.org
Subject: [PATCH] Bluetooth: hci_sync: Fix accept list UAF during suspend
Date: Thu, 30 Jul 2026 17:23:31 +0800	[thread overview]
Message-ID: <20260730092331.2069741-1-nicoyip.dev@gmail.com> (raw)

hci_update_event_filter_sync() walks hdev->accept_list while sending a
synchronous HCI command for each remote-wakeup device.  The suspend path
holds hdev->req_lock, but accept-list updates are serialized by hdev->lock.
Consequently, remove_device() can free the current list entry during the
controller wait.

The following interleaving causes the use-after-free:

  hci_update_event_filter_sync()    remove_device()
  fetch accept-list entry
  hci_set_event_filter_sync()
    wait for controller response    hci_dev_lock()
                                    list_del()
                                    kfree()
                                    hci_dev_unlock()
  read the freed list.next

KASAN reported:

  BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910
  Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10
  Workqueue: events vhci_suspend_work
  Call Trace:
   hci_suspend_sync+0x835/0x910
   hci_suspend_dev+0x182/0x450
   process_one_work+0x661/0x1090
   worker_thread+0x45b/0xd10

  Allocated by task 86:
   hci_bdaddr_list_add_with_flags+0x1a8/0x400
   add_device+0x381/0x820
   hci_sock_sendmsg+0x1033/0x1ea0

  Freed by task 91:
   kfree+0x131/0x3c0
   remove_device+0x429/0xb70
   hci_sock_sendmsg+0x1033/0x1ea0

Snapshot the remote-wakeup addresses under hdev->lock.  Release the lock
before sending HCI commands.  This preserves list order and avoids
retaining an accept-list node across a controller wait.

Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
---
 net/bluetooth/hci_sync.c | 38 +++++++++++++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 7 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index c0b1fc293b49..540da19d1d64 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -6250,6 +6250,8 @@ static int hci_pause_discovery_sync(struct hci_dev *hdev)
 static int hci_update_event_filter_sync(struct hci_dev *hdev)
 {
 	struct bdaddr_list_with_flags *b;
+	bdaddr_t *accept_list = NULL;
+	size_t i, num_entries = 0;
 	u8 scan = SCAN_DISABLED;
 	bool scanning = test_bit(HCI_PSCAN, &hdev->flags);
 	int err;
@@ -6263,26 +6265,48 @@ static int hci_update_event_filter_sync(struct hci_dev *hdev)
 	if (hci_test_quirk(hdev, HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL))
 		return 0;
 
+	hci_dev_lock(hdev);
+
+	list_for_each_entry(b, &hdev->accept_list, list)
+		if (b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP)
+			num_entries++;
+
+	if (num_entries) {
+		accept_list = kmalloc_array(num_entries, sizeof(*accept_list),
+					    GFP_KERNEL);
+		if (!accept_list) {
+			hci_dev_unlock(hdev);
+			return -ENOMEM;
+		}
+	}
+
+	i = 0;
+	list_for_each_entry(b, &hdev->accept_list, list)
+		if (b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP)
+			bacpy(&accept_list[i++], &b->bdaddr);
+
+	hci_dev_unlock(hdev);
+
 	/* Always clear event filter when starting */
 	hci_clear_event_filter_sync(hdev);
 
-	list_for_each_entry(b, &hdev->accept_list, list) {
-		if (!(b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP))
-			continue;
-
-		bt_dev_dbg(hdev, "Adding event filters for %pMR", &b->bdaddr);
+	for (i = 0; i < num_entries; i++) {
+		bt_dev_dbg(hdev, "Adding event filters for %pMR",
+			   &accept_list[i]);
 
 		err =  hci_set_event_filter_sync(hdev, HCI_FLT_CONN_SETUP,
 						 HCI_CONN_SETUP_ALLOW_BDADDR,
-						 &b->bdaddr,
+						 &accept_list[i],
 						 HCI_CONN_SETUP_AUTO_ON);
 		if (err)
 			bt_dev_err(hdev, "Failed to set event filter for %pMR",
-				   &b->bdaddr);
+				   &accept_list[i]);
 		else
 			scan = SCAN_PAGE;
 	}
 
+	kfree(accept_list);
+
 	if (scan && !scanning)
 		hci_write_scan_enable_sync(hdev, scan);
 	else if (!scan && scanning)
-- 
2.43.0


                 reply	other threads:[~2026-07-30  9:23 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260730092331.2069741-1-nicoyip.dev@gmail.com \
    --to=nicoyip.dev@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox