[PATCH v2] Bluetooth: btnxpuart: Validate the FW dump header length

[Ali Ahmet Memis <ali@iusegentoo.com>]

nxp_process_fw_dump() pulls the ACL header off the frame and then reads
seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data,
without checking that the ACL payload is long enough to contain it.

h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the
number of payload bytes named in that header, so skb->len is 4 + dlen
with dlen supplied by the controller and possibly smaller than the 8
byte dump header, or zero. A short frame with connection handle 0xfff
therefore reads both fields from beyond the received data.

Beyond the read itself, buf_len is what terminates a dump: a value of
zero makes the driver call hci_devcd_complete() and reset the
controller, so a truncated frame can end a dump early.

Reject frames whose payload is shorter than the dump header.

Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature")
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
---
v2: Warn on the early exit path instead of dropping the frame silently,
    as suggested by Neeraj. Dropped the trailing newline from the
    suggested message, since bt_dev_warn() already appends one.

v1: https://lore.kernel.org/all/20260814081221.913676-1-ali@iusegentoo.com/

 drivers/bluetooth/btnxpuart.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 6a1cffe08d5f..f439d287146e 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -1370,10 +1370,19 @@ static int nxp_process_fw_dump(struct hci_dev *hdev, struct sk_buff *skb)
 									  sizeof(*acl_hdr));
 	struct nxp_fw_dump_hdr *fw_dump_hdr = (struct nxp_fw_dump_hdr *)skb->data;
 	struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev);
-	__u16 seq_num = __le16_to_cpu(fw_dump_hdr->seq_num);
-	__u16 buf_len = __le16_to_cpu(fw_dump_hdr->buf_len);
+	__u16 seq_num;
+	__u16 buf_len;
 	int err;
 
+	/* The ACL payload must be long enough to hold the FW dump header */
+	if (skb->len < sizeof(*fw_dump_hdr)) {
+		bt_dev_warn(hdev, "FW dump: invalid or corrupt fw dump chunk");
+		goto free_skb;
+	}
+
+	seq_num = __le16_to_cpu(fw_dump_hdr->seq_num);
+	buf_len = __le16_to_cpu(fw_dump_hdr->buf_len);
+
 	if (seq_num == 0x0001) {
 		if (test_and_set_bit(BTNXPUART_FW_DUMP_IN_PROGRESS, &nxpdev->tx_state)) {
 			bt_dev_err(hdev, "FW dump already in progress");
-- 
2.55.0