From: "Frédéric Danis" <frederic.danis@collabora.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ 3/3] doc/qualification: Add BAP/USR tests
Date: Thu, 3 Sep 2026 10:57:16 +0200 [thread overview]
Message-ID: <20260903085716.741578-3-frederic.danis@collabora.com> (raw)
In-Reply-To: <20260903085716.741578-1-frederic.danis@collabora.com>
From: Raghavendra Rao Sidlagatta <raghavendra.rao@collabora.com>
---
doc/qualification/bap-pts.rst | 1992 +++++++++++++++++++++++++++++++++
1 file changed, 1992 insertions(+)
diff --git a/doc/qualification/bap-pts.rst b/doc/qualification/bap-pts.rst
index 2f81e2ad5..53a627dbc 100644
--- a/doc/qualification/bap-pts.rst
+++ b/doc/qualification/bap-pts.rst
@@ -1620,3 +1620,1995 @@ for which we know the test passed.
| | | | | If nothing occurs after connection and pairing, check that audio output |
| | | | | is set to the PTS device. |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/ADV/BV-01-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/ADV/BV-04-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of |
+| | | | | 'wireplumber.conf.d/announcement.conf':: |
+| | | | | |
+| | | | | monitor.bluez.properties = { |
+| | | | | bluez5.bap-server.ascs-announcement = "targeted" |
+| | | | | } |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-01-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-02-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-05-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-06-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-07-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-003-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-004-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-006-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-007-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-008-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-011-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-012-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-013-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-014-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-015-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-016-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-019-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-020-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-023-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-024-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-071-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-072-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-075-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-076-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-079-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-080-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-081-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-082-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-083-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-084-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-087-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-088-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-091-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-092-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-104-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-106-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-111-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-112-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-113-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-114-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-115-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-116-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-135-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-136-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-137-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-138-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-139-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-143-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-144-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-145-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-146-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-147-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-148-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-149-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-150-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-161-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-162-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-163-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-167-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-168-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-01-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-02-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-03-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-04-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-05-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-360-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-362-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-367-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-369-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-375-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-377-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-378-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-380-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+
+Scripts
+========
+
+The script below is useful to automate the linking of Bluetooth input and
+Bluetooth output, ensuring both are opened.
+
+link-bt-microphone-with-speakers.lua::
+
+ #!/usr/bin/wpexec
+
+ log = Log.open_topic('auto-bluez')
+
+ function parseBool (var)
+ return var and (var:lower () == "true" or var == "1")
+ end
+
+ function createLink (si, target)
+ local si_props = si.properties
+ local target_props = target.properties
+ local out_item = nil
+ local in_item = nil
+ local si_link = nil
+
+ if si_props["item.node.direction"] == "output" then
+ -- playback
+ out_item = si
+ in_item = target
+ else
+ -- capture
+ in_item = si
+ out_item = target
+ end
+
+ log:info (si,
+ string.format ("link %s <-> %s",
+ tostring (si_props ["node.name"]),
+ tostring (target_props ["node.name"])))
+
+ -- create and configure link
+ si_link = SessionItem ("si-standard-link")
+ if not si_link:configure {
+ ["out.item"] = out_item,
+ ["in.item"] = in_item,
+ ["passthrough"] = false,
+ ["exclusive"] = parseBool (si_props ["node.exclusive"]),
+ ["out.item.port.context"] = "output",
+ ["in.item.port.context"] = "input",
+ ["media.role"] = si_props["media.role"],
+ ["target.media.class"] = target_props["media.class"],
+ ["policy.role-based.priority"] = target_props["policy.role-based.priority"],
+ ["policy.role-based.action.same-priority"] = target_props["policy.role-based.action.same-priority"],
+ ["policy.role-based.action.lower-priority"] = target_props["policy.role-based.action.lower-priority"],
+ ["is.role.policy.link"] = nil,
+ ["main.item.id"] = si.id,
+ ["target.item.id"] = target.id,
+ } then
+ log:info (si, "Error configuring link")
+ return
+ end
+
+ -- Register
+ si_link:register ()
+
+ -- Activate
+ si_link:activate (Feature.SessionItem.ACTIVE, function (l, e)
+ if e then
+ log:info (si, "Error activating link")
+ l:remove ()
+ else
+ -- Success activating link
+ log:info (si, "Link activated")
+ end
+ end)
+ end
+
+ linkables_om = ObjectManager {
+ Interest { type = "SiLinkable" }
+ }
+
+ links_om = ObjectManager {
+ Interest { type = "Link" }
+ }
+
+ linkables_om:connect("objects-changed", function (om)
+ -- Find the BT microphone linkable
+ local bt_microphone = om:lookup {
+ type = "SiLinkable",
+ Constraint { "node.name", "matches", "bluez_input*"},
+ }
+
+ -- Find the speakers linkable
+ local speakers = om:lookup {
+ type = "SiLinkable",
+ Constraint { "node.name", "matches", "alsa_loopback_device*.alsa_output*Speaker*" },
+ }
+
+ if bt_microphone ~= nil and speakers ~= nil then
+ local link = links_om:lookup {
+ Constraint { "link.output.node", "=", bt_microphone.properties["object.id"] },
+ Constraint { "link.input.node", "=", speakers.properties["object.id"] }
+ }
+ if link == nil then
+ createLink (bt_microphone, speakers)
+ end
+ end
+ end)
+
+ linkables_om:activate()
+ links_om:activate()
--
2.43.0
next prev parent reply other threads:[~2026-09-03 8:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 8:57 [PATCH BlueZ 1/3] doc/qualification: Add PICS and howto for the BAP qualification Frédéric Danis
2026-09-03 8:57 ` [PATCH BlueZ 2/3] doc/qualification: Add BAP/UCL tests Frédéric Danis
2026-09-03 8:57 ` Frédéric Danis [this message]
2026-09-03 11:53 ` [BlueZ,1/3] doc/qualification: Add PICS and howto for the BAP qualification bluez.test.bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260903085716.741578-3-frederic.danis@collabora.com \
--to=frederic.danis@collabora.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox