[PATCH] Bluetooth: btusb: Add USB ID 13d3:3631 for MediaTek MT7925

[Kenzi Voyer <kenzivoyer@gmail.com>]

The Mercusys (TP-Link) MA37BE Wi-Fi/Bluetooth adapter uses a MediaTek
MT7925 chip whose Bluetooth part enumerates as USB ID 13d3:3631.
This ID is not present in the btusb device table, so the interfaces
bind without MediaTek driver data and HCI initialization fails with:

    Bluetooth: hci0: Opcode 0x0c03 failed: -16

leaving no usable Bluetooth controller. Adding the ID to the MT7925
section of the table makes the driver run the MediaTek setup path
(firmware load) and the adapter works normally afterwards.

Signed-off-by: Kenzi Voyer <kenzivoyer@gmail.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index dc7191bf4..68396d553 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -831,6 +831,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3630), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3631), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x2c7c, 0x7009), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
-- 
2.55.0