[PATCH v2 07/14] unit/test-rap: Expect Abort Operation in RAS Features

[Cheng Jiang <cheng.jiang@oss.qualcomm.com>]

The RAS Features characteristic now advertises Abort Operation, so the
value the Features read returns is 0x05 rather than 0x01.

Assisted-by: Claude:claude-opus-4.8
---
 unit/test-rap.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/unit/test-rap.c b/unit/test-rap.c
index 8e2759654..b05edf203 100644
--- a/unit/test-rap.c
+++ b/unit/test-rap.c
@@ -798,11 +798,11 @@ const struct test_config_rap cfg_cggit_discovery = {
  *       Handle: 0x0003 (RAS Features value handle)
  *
  *  ATT: Read Response (0x0b) len 5
- *       Value: 0x01 0x00 0x00 0x00
+ *       Value: 0x05 0x00 0x00 0x00
  *       Feature bits:
  *         Bit 0: Real-time ranging (1 = supported)
  *         Bit 1: Retrieve stored results (0 = not supported)
- *         Bit 2: Abort operation (0 = not supported)
+ *         Bit 2: Abort operation (1 = supported)
  *
  *  Note: The RAS Features characteristic is registered with
  *  BT_ATT_PERM_READ | BT_ATT_PERM_READ_ENCRYPT. Since the test sets
@@ -813,7 +813,7 @@ const struct test_config_rap cfg_cggit_discovery = {
 
 #define ATT_READ_RAS_FEATURES \
 	IOV_DATA(0x0a, 0x03, 0x00), \
-	IOV_DATA(0x0b, 0x01, 0x00, 0x00, 0x00)
+	IOV_DATA(0x0b, 0x05, 0x00, 0x00, 0x00)
 
 #define RAS_SR_RCO_BV_01_C \
 	ATT_EXCHANGE_MTU, \
-- 
2.43.0