From: Weihong Guan <weihong.guan@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
Weihong Guan <weihong.guan@gmail.com>
Subject: [PATCH BlueZ 2/2] mgmt-tester: Add single advertising set tests
Date: Thu, 12 Nov 2026 02:38:58 +0000 [thread overview]
Message-ID: <20261112023858.892176-3-weihong.guan@gmail.com> (raw)
In-Reply-To: <20261112023858.892176-1-weihong.guan@gmail.com>
With a controller supporting one advertising set the kernel gives
instance 1 handle 0x00. Check that the set's commands and events use
the handle rather than the instance number:
- adding a non-connectable instance sets its random address on handle
0x00;
- an instance whose timeout the controller enforces (the set's
duration) is removed when the set terminates on handle 0x00;
- removing instance 1 removes the set on handle 0x00.
They pass on bluetooth-next, which has the fixes since commit
4dce35adafb5 ("Bluetooth: hci_event: Find the owner of a terminated adv
set") and the three before it, and fail without them: the random
address goes to handle 0x01, a set the controller doesn't have.
Assisted-by: Claude:claude-opus-5.5
---
tools/mgmt-tester.c | 87 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/tools/mgmt-tester.c b/tools/mgmt-tester.c
index 201bd43..c8282f7 100644
--- a/tools/mgmt-tester.c
+++ b/tools/mgmt-tester.c
@@ -367,6 +367,7 @@ struct generic_data {
bdaddr_t *setup_bdaddr;
bool setup_le_states;
const uint8_t *le_states;
+ uint8_t setup_adv_sets;
const uint16_t *setup_settings;
bool setup_nobredr;
bool setup_limited_discov;
@@ -505,6 +506,13 @@ static void read_index_list_callback(uint8_t status, uint16_t length,
if (test && test->setup_le_states)
hciemu_set_central_le_states(data->hciemu, test->le_states);
+ if (test && test->setup_adv_sets &&
+ !hciemu_set_central_le_adv_sets(data->hciemu,
+ test->setup_adv_sets)) {
+ tester_warn("hciemu_set_central_le_adv_sets failed");
+ tester_pre_setup_failed();
+ }
+
}
static void test_pre_setup(const void *test_data)
@@ -9244,6 +9252,72 @@ static const struct generic_data add_ext_advertising_timeout_expired = {
.expect_alt_ev_len = sizeof(advertising_instance1_param),
};
+/* A controller with a single advertising set: instance 1 is given handle
+ * 0x00, so the set's commands and events carry handle 0x00, not the
+ * instance number.
+ */
+static int set_adv_set_rand_addr_handle_0_check(const void *param,
+ uint16_t length)
+{
+ const struct bt_hci_cmd_le_set_adv_set_rand_addr *cp = param;
+
+ if (length != sizeof(*cp))
+ return -EINVAL;
+
+ return cp->handle != 0x00;
+}
+
+static const uint8_t remove_adv_set_handle_0_param[] = {
+ 0x00,
+};
+
+/* Handle 0x00 and any address: printed if the check fails */
+static const uint8_t set_adv_set_rand_addr_handle_0_param[] = {
+ 0x00, /* handle */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* address */
+};
+
+static const struct generic_data add_ext_advertising_1_set = {
+ .setup_adv_sets = 1,
+ .setup_settings = settings_powered_le,
+ .send_opcode = MGMT_OP_ADD_ADVERTISING,
+ .send_param = add_advertising_param_uuid,
+ .send_len = sizeof(add_advertising_param_uuid),
+ .expect_param = advertising_instance1_param,
+ .expect_len = sizeof(advertising_instance1_param),
+ .expect_status = MGMT_STATUS_SUCCESS,
+ .expect_alt_ev = MGMT_EV_ADVERTISING_ADDED,
+ .expect_alt_ev_param = advertising_instance1_param,
+ .expect_alt_ev_len = sizeof(advertising_instance1_param),
+ .expect_hci_command = BT_HCI_CMD_LE_SET_ADV_SET_RAND_ADDR,
+ .expect_hci_param = set_adv_set_rand_addr_handle_0_param,
+ .expect_hci_len = sizeof(set_adv_set_rand_addr_handle_0_param),
+ .expect_hci_param_check_func = set_adv_set_rand_addr_handle_0_check,
+};
+
+static const struct generic_data add_ext_adv_1_set_timeout_expired = {
+ .setup_adv_sets = 1,
+ .expect_alt_ev = MGMT_EV_ADVERTISING_REMOVED,
+ .expect_alt_ev_param = advertising_instance1_param,
+ .expect_alt_ev_len = sizeof(advertising_instance1_param),
+};
+
+static const struct generic_data remove_ext_advertising_1_set = {
+ .setup_adv_sets = 1,
+ .send_opcode = MGMT_OP_REMOVE_ADVERTISING,
+ .send_param = remove_advertising_param_1,
+ .send_len = sizeof(remove_advertising_param_1),
+ .expect_status = MGMT_STATUS_SUCCESS,
+ .expect_param = remove_advertising_param_1,
+ .expect_len = sizeof(remove_advertising_param_1),
+ .expect_alt_ev = MGMT_EV_ADVERTISING_REMOVED,
+ .expect_alt_ev_param = advertising_instance1_param,
+ .expect_alt_ev_len = sizeof(advertising_instance1_param),
+ .expect_hci_command = BT_HCI_CMD_LE_REMOVE_ADV_SET,
+ .expect_hci_param = remove_adv_set_handle_0_param,
+ .expect_hci_len = sizeof(remove_adv_set_handle_0_param),
+};
+
static const struct generic_data remove_ext_advertising_fail_1 = {
.send_opcode = MGMT_OP_REMOVE_ADVERTISING,
.send_param = remove_advertising_param_1,
@@ -15713,6 +15787,19 @@ int main(int argc, char *argv[])
setup_add_advertising_connectable_1m,
test_command_generic);
+ /* A single advertising set: instance 1 on handle 0x00 */
+ test_bredrle50("Add Ext Advertising - Success (1 set, Rand Addr)",
+ &add_ext_advertising_1_set,
+ NULL, test_command_generic);
+ test_bredrle50_full("Add Ext Advertising - Success (1 set, Timeout)",
+ &add_ext_adv_1_set_timeout_expired,
+ setup_add_advertising_timeout,
+ test_command_generic, 3);
+ test_bredrle50("Remove Ext Advertising - Success (1 set)",
+ &remove_ext_advertising_1_set,
+ setup_add_advertising,
+ test_command_generic);
+
test_bredrle50("Remove Ext Advertising - Invalid Params 1",
&remove_ext_advertising_fail_1,
NULL, test_command_generic);
--
2.47.3
prev parent reply other threads:[~2026-11-12 2:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 2:38 [PATCH BlueZ 0/2] Single advertising set in the emulator and mgmt-tester Weihong Guan
2026-11-12 2:38 ` [PATCH BlueZ 1/2] emulator: Set the number of advertising sets Weihong Guan
2026-11-12 9:14 ` Single advertising set in the emulator and mgmt-tester bluez.test.bot
2026-11-12 2:38 ` Weihong Guan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112023858.892176-3-weihong.guan@gmail.com \
--to=weihong.guan@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox