From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ v1 1/3] emulator/bthost: Add helpers to test security of deferred setup
Date: Thu, 19 Nov 2026 17:15:18 -0500 [thread overview]
Message-ID: <20261119221520.1311381-2-luiz.dentz@gmail.com> (raw)
In-Reply-To: <20261119221520.1311381-1-luiz.dentz@gmail.com>
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add helpers so testers can control the remote side while a connection
is pending:
- bthost_hold_auth_request()/bthost_release_auth_request() hold the
reply to a PIN Code or IO Capability Request, keeping pairing in
progress until it is released.
- bthost_set_l2cap_rsp_pending() keeps a request while its Connection
Response is pending, so its callback is called with the final
response as well.
- bthost_set_conn_encrypt() enables/disables the encryption of a
BR/EDR connection.
Assisted-by: OpenCode:claude-fable-5.2
---
emulator/bthost.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++
emulator/bthost.h | 6 ++++
2 files changed, 81 insertions(+)
diff --git a/emulator/bthost.c b/emulator/bthost.c
index e65d29faa989..e5526aebf2ec 100644
--- a/emulator/bthost.c
+++ b/emulator/bthost.c
@@ -273,6 +273,11 @@ struct bthost {
uint8_t io_capability;
uint8_t auth_req;
bool reject_user_confirm;
+ bool hold_auth_request;
+ bool auth_request_held;
+ bool auth_request_pin;
+ bool l2cap_rsp_pending;
+ uint8_t auth_request_bdaddr[6];
void *smp_data;
bool conn_init;
bool le;
@@ -1543,6 +1548,13 @@ static void evt_pin_code_request(struct bthost *bthost, const void *data,
if (len < sizeof(*ev))
return;
+ if (bthost->hold_auth_request) {
+ memcpy(bthost->auth_request_bdaddr, ev->bdaddr, 6);
+ bthost->auth_request_held = true;
+ bthost->auth_request_pin = true;
+ return;
+ }
+
if (bthost->pin_len > 0) {
struct bt_hci_cmd_pin_code_request_reply cp;
@@ -1667,6 +1679,13 @@ static void evt_io_cap_request(struct bthost *bthost, const void *data,
if (!conn)
return;
+ if (bthost->hold_auth_request) {
+ memcpy(bthost->auth_request_bdaddr, ev->bdaddr, 6);
+ bthost->auth_request_held = true;
+ bthost->auth_request_pin = false;
+ return;
+ }
+
memcpy(cp.bdaddr, ev->bdaddr, 6);
cp.capability = bthost->io_capability;
cp.oob_data = 0x00;
@@ -2437,6 +2456,19 @@ static void handle_pending_l2reqs(struct bthost *bthost, struct btconn *conn,
continue;
}
+ /* Keep the request while the response is only pending */
+ if (bthost->l2cap_rsp_pending &&
+ code == BT_L2CAP_PDU_CONN_RSP &&
+ len >= sizeof(struct bt_l2cap_pdu_conn_rsp)) {
+ const struct bt_l2cap_pdu_conn_rsp *rsp = data;
+
+ if (le16_to_cpu(rsp->result) == 0x0001) {
+ req->cb(code, data, len, req->user_data);
+ curr = &req->next;
+ continue;
+ }
+ }
+
*curr = req->next;
req->cb(code, data, len, req->user_data);
free(req);
@@ -4276,6 +4308,49 @@ uint8_t bthost_get_auth_req(struct bthost *bthost)
return auth_req;
}
+void bthost_hold_auth_request(struct bthost *bthost, bool hold)
+{
+ bthost->hold_auth_request = hold;
+}
+
+void bthost_release_auth_request(struct bthost *bthost)
+{
+ bthost->hold_auth_request = false;
+
+ if (!bthost->auth_request_held)
+ return;
+
+ bthost->auth_request_held = false;
+
+ if (bthost->auth_request_pin) {
+ struct bt_hci_evt_pin_code_request ev;
+
+ memcpy(ev.bdaddr, bthost->auth_request_bdaddr, 6);
+ evt_pin_code_request(bthost, &ev, sizeof(ev));
+ } else {
+ struct bt_hci_evt_io_capability_request ev;
+
+ memcpy(ev.bdaddr, bthost->auth_request_bdaddr, 6);
+ evt_io_cap_request(bthost, &ev, sizeof(ev));
+ }
+}
+
+void bthost_set_l2cap_rsp_pending(struct bthost *bthost, bool enable)
+{
+ bthost->l2cap_rsp_pending = enable;
+}
+
+void bthost_set_conn_encrypt(struct bthost *bthost, uint16_t handle,
+ uint8_t encr_mode)
+{
+ struct bt_hci_cmd_set_conn_encrypt cp;
+
+ cp.handle = cpu_to_le16(handle);
+ cp.encr_mode = encr_mode;
+
+ send_command(bthost, BT_HCI_CMD_SET_CONN_ENCRYPT, &cp, sizeof(cp));
+}
+
void bthost_set_reject_user_confirm(struct bthost *bthost, bool reject)
{
bthost->reject_user_confirm = reject;
diff --git a/emulator/bthost.h b/emulator/bthost.h
index b3e18114638a..92aaf42305da 100644
--- a/emulator/bthost.h
+++ b/emulator/bthost.h
@@ -206,6 +206,12 @@ void bthost_set_io_capability(struct bthost *bthost, uint8_t io_capability);
uint8_t bthost_get_io_capability(struct bthost *bthost);
void bthost_set_auth_req(struct bthost *bthost, uint8_t auth_req);
uint8_t bthost_get_auth_req(struct bthost *bthost);
+void bthost_hold_auth_request(struct bthost *bthost, bool hold);
+void bthost_release_auth_request(struct bthost *bthost);
+void bthost_set_l2cap_rsp_pending(struct bthost *bthost, bool enable);
+void bthost_set_conn_encrypt(struct bthost *bthost, uint16_t handle,
+ uint8_t encr_mode);
+
void bthost_set_reject_user_confirm(struct bthost *bthost, bool reject);
bool bthost_get_reject_user_confirm(struct bthost *bthost);
--
2.56.0
next prev parent reply other threads:[~2026-11-19 22:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 22:15 [PATCH BlueZ v1 0/3] Add tests for security of deferred setup Luiz Augusto von Dentz
2026-11-19 22:15 ` Luiz Augusto von Dentz [this message]
2026-11-19 22:15 ` [PATCH BlueZ v1 2/3] l2cap-tester: " Luiz Augusto von Dentz
2026-11-19 22:15 ` [PATCH BlueZ v1 3/3] rfcomm-tester: Add tests for " Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119221520.1311381-2-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox