From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ v4 00/18] Channel Sounding and RAP fixes
Date: Fri, 20 Nov 2026 11:54:50 -0500 [thread overview]
Message-ID: <20261120165510.1858959-1-luiz.dentz@gmail.com> (raw)
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This series fixes the Ranging Profile Requester and Reflector setup
and RAS server issues found while running the RAP and RAS PTS tests
(Channel Sounding with a Reflector, peer-created configurations,
Ranging Data subscriptions, per-connection Ranging Counters), plus a
GATT database CCC state leak and a use-after-free in bluetoothctl.
v4:
- profiles/ranging: filter Procedure Enable Complete by connection and
decode event handles before the lookup (also big-endian hosts).
- profiles/ranging: use the config ID chosen by the peer and clear the
role, pending Security Enable and procedure when it is removed.
- profiles/ranging: serialize restarts with a session generation and by
recognizing the report of a disable sent before the restart.
- profiles/ranging: honor the stopped session for Config Complete and
Procedure Enable Complete, and defer procedure setup until both
capability reads are in.
- profiles/ranging: stop a running Reflector procedure by removing the
configuration, decide Reflector sessions from the negotiated role,
ignore duration for Reflector and clean up on every way a session ends.
- shared/rap: wait for the RAS Features read before picking a mode, keep
an explicit Disabled mode, retry rejected CCCD writes and arm the
Real-time timeout when it is enabled mid-procedure.
- unit/test-rap: tests for the shared/rap changes.
v3:
- gatt-database: ignore device removal when the adapter has no GATT
database (non-LE controllers).
- profiles/ranging: end an armed Reflector session when the remote
procedure stops, so bluetoothctl and the daemon agree on the session.
- profiles/ranging: ignore Remote FAE completions of other links.
- profiles/ranging: also handle Encryption Change v2 and v3 events when
deferring CS Security Enable.
- profiles/ranging: keep the setup state of a configuration the peer
created before StartMeasurement() instead of resetting it to INIT.
v2:
- gatt-database: clear the cached state of both bearers of a dual-mode
device when it is removed.
- shared/rap: keep the Ranging Data Ready and Overwritten counters per
connection instead of resetting the adapter-wide state on detach.
- profiles/ranging: exclude armed Reflector sessions from the Active
property.
- profiles/ranging: ignore Remote Supported Capabilities of unmapped
handles, so one link cannot overwrite another's antenna limits.
- profiles/ranging: enter CS_STATE_INIT before the asynchronous
capability reads, so a peer-created configuration is not rewound.
- unit/test-rap: add tests for the Requester Ranging Data subscriptions,
the Real-time timeout and the per-connection counters.
Cheng Jiang (15):
gatt-database: Drop stale device state for removed bonds
shared/rap: Reset the readable Ranging Counters per connection
shared/rap: Subscribe on-demand data with the requested transport
shared/rap: Subscribe to Ranging Data when a measurement starts
client/cs: Fix use-after-free in stop_measurement_reply
shared/hci: Look up the connection handle on the right link
profiles/ranging: Let the Reflector run the CS setup phase
profiles/ranging: Let StartMeasurement() pick the Initiator for Both
profiles/ranging: Take the CS role from Config Complete
profiles/ranging: Act on a CS configuration created by the peer
profiles/ranging: Keep a peer-driven setup from being rewound
profiles/ranging: Defer CS Security Enable until the link is encrypted
profiles/ranging: Choose the CS antenna configuration from both ends
profiles/ranging: Do not start a procedure after StopMeasurement()
shared/rap: Start the Real-time timeout when the procedure starts
Luiz Augusto von Dentz (3):
profiles/ranging: Keep CS sessions apart from stale and unrelated
events
unit/test-rap: Add tests for Ranging Data subscription and counters
shared/rap: Defer Ranging Data mode selection until Features is read
client/cs.c | 40 +-
doc/org.bluez.ChannelSounding1.rst | 25 +-
lib/bluetooth/hci.h | 1 +
profiles/ranging/rap.c | 90 +++-
profiles/ranging/rap_hci.c | 721 +++++++++++++++++++++++------
src/device.c | 3 +
src/gatt-database.c | 34 ++
src/gatt-database.h | 2 +
src/shared/hci.c | 12 +-
src/shared/hci.h | 2 +-
src/shared/rap.c | 190 +++++++-
src/shared/rap.h | 11 +-
tools/hcitool.c | 3 -
unit/test-rap.c | 604 ++++++++++++++++++++++--
14 files changed, 1485 insertions(+), 253 deletions(-)
--
2.56.0
next reply other threads:[~2026-11-20 16:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 16:54 Luiz Augusto von Dentz [this message]
2026-11-20 16:54 ` [PATCH BlueZ v4 01/18] gatt-database: Drop stale device state for removed bonds Luiz Augusto von Dentz
2026-11-20 22:32 ` Channel Sounding and RAP fixes bluez.test.bot
2026-11-20 16:54 ` [PATCH BlueZ v4 02/18] shared/rap: Reset the readable Ranging Counters per connection Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 03/18] shared/rap: Subscribe on-demand data with the requested transport Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 04/18] shared/rap: Subscribe to Ranging Data when a measurement starts Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 05/18] client/cs: Fix use-after-free in stop_measurement_reply Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 06/18] shared/hci: Look up the connection handle on the right link Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 07/18] profiles/ranging: Let the Reflector run the CS setup phase Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 08/18] profiles/ranging: Let StartMeasurement() pick the Initiator for Both Luiz Augusto von Dentz
2026-11-20 16:54 ` [PATCH BlueZ v4 09/18] profiles/ranging: Take the CS role from Config Complete Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 10/18] profiles/ranging: Act on a CS configuration created by the peer Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 11/18] profiles/ranging: Keep a peer-driven setup from being rewound Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 12/18] profiles/ranging: Defer CS Security Enable until the link is encrypted Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 13/18] profiles/ranging: Choose the CS antenna configuration from both ends Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 14/18] profiles/ranging: Do not start a procedure after StopMeasurement() Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 15/18] profiles/ranging: Keep CS sessions apart from stale and unrelated events Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 16/18] shared/rap: Start the Real-time timeout when the procedure starts Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 17/18] unit/test-rap: Add tests for Ranging Data subscription and counters Luiz Augusto von Dentz
2026-11-20 16:55 ` [PATCH BlueZ v4 18/18] shared/rap: Defer Ranging Data mode selection until Features is read Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120165510.1858959-1-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox