public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: Dirk Vanden Boer <dirk.vdb@gmail.com>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] At commands not available
Date: Sat, 16 Jul 2005 21:13:04 +0200	[thread overview]
Message-ID: <20b987f5050716121359298b52@mail.gmail.com> (raw)
In-Reply-To: <Pine.LNX.4.33.0507162023200.4834-100000@redbean.intranet.gw-instruments.de>

I believe DUN is channel 1, to be sure I tried every channel, nothing
seems to work

Dirk

On 7/16/05, Peter Wippich <pewi@gw-instruments.de> wrote:
>=20
> Try DUN. But maybe the CBC command is only available on the physical port=
.
>=20
> Ciao,
>=20
> Peter
>=20
>=20
> On Sat, 16 Jul 2005, Dirk Vanden Boer wrote:
>=20
> > Thanks for pointing me to that. I was connecting to channel 4 (heaset
> > service) which was wrong, I think I should be connecting to the serial
> > port service (channel 1). But the CBC command is still not available.
> > In fact the available commands listed with AT* are the same for
> > channel 1 and 4.
> >
> > Dirk
> >
> >
> > On 7/16/05, Peter Wippich <pewi@gw-instruments.de> wrote:
> > >
> > > Hi Dirk,
> > >
> > > which service you are connecting to ??? If you connect to the wrong
> > > service (channel) the phone may (shall !) only make available the AT
> > > commands belonging to this service.
> > >
> > > Ciao,
> > >
> > > Peter
> > >
> > >
> > > On Sat, 16 Jul 2005, Dirk Vanden Boer wrote:
> > >
> > > > On 7/16/05, Fred Schaettgen <bluez-devel@schaettgen.de> wrote:
> > > > > On Saturday, 16. July 2005 18:32, Dirk Vanden Boer wrote:
> > > > > > Hi,
> > > > > > I'm trying to send AT commands to my mobile phone using an rfco=
mm
> > > > > > connection. The connection seems to work because I can exectute=
 some
> > > > > > commands (like manufacturer name). But a whole bunch of command=
s are
> > > > > > not available (eg. battery charge: "AT+CBC\r" returns ERROR). I=
 can
> > > > > > run the AT* command which lists the available commands but a lo=
t of
> > > > > > common commands are not in the list. Could it be that there is
> > > > > > something wrong with my connection?
> > > > >
> > > > > Are you sure that this command should be supported at all? If you=
 are
> > > > > connecting to the handsfree service, then the phone probably does=
 not have to
> > > > > support it. At least I can't find +CBC in the handsfree spec. Pho=
nes are free
> > > > > to support additional commands though, or at least they do suppor=
t more in
> > > > > practice. It works with a Nokia 6230 for instance, without any sp=
ecial
> > > > > initialization.
> > > > >
> > > > > Fred
> > > >
> > > > The CBC command is listed in the developers guidelines document of =
the
> > > > ericsson t68 phone, so I guess it should be available.
> > > >
> > > > Dirk
> > > >
> > > >
> >
> >
> > -------------------------------------------------------
> > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> > from IBM. Find simple to follow Roadmaps, straightforward articles,
> > informative Webcasts and more! Get everything you need to get up to
> > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id=16492&op=CCk
> > _______________________________________________
> > Bluez-devel mailing list
> > Bluez-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-devel
> >
>=20
> |       Peter Wippich                   Voice: +49 30 46776411          |
> |       G&W Instruments GmbH            fax:   +49 30 46776419          |
> |       Gustav-Meyer-Allee 25, Geb. 12  Email: pewi@gw-instruments.de   |
> |       D-13355 Berlin  / Germany                                       |
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> from IBM. Find simple to follow Roadmaps, straightforward articles,
> informative Webcasts and more! Get everything you need to get up to
> speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id=16492&opclick
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2005-07-16 19:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-07-16 16:32 [Bluez-devel] At commands not available Dirk Vanden Boer
2005-07-16 17:17 ` Fred Schaettgen
2005-07-16 17:26   ` Dirk Vanden Boer
2005-07-16 17:35     ` Peter Wippich
2005-07-16 18:06       ` Dirk Vanden Boer
2005-07-16 18:24         ` Peter Wippich
2005-07-16 19:13           ` Dirk Vanden Boer [this message]
2005-07-19 15:06             ` Luca Pizzamiglio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20b987f5050716121359298b52@mail.gmail.com \
    --to=dirk.vdb@gmail.com \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox