Re: [Bluez-devel] Motorola DC800

Brad Midgley
2008-09-23T22:32:48Z

Stephan

Sorry for the miscue. You should go to the bluez wiki and use the
instructions there for sending a2dp audio to a headset from your pc.
It's best if you're on a recent bluez.

http://wiki.bluez.org/wiki/HOWTO/AudioDevices

Brad

On Tue, Sep 23, 2008 at 3:27 PM, Stephan de Georgio <sd@stephan.co.uk> wrote:
> Brad,
>
> >afaik, this is still only possible using "a2recv" in the old btsco
> project.
>
> Is a2recv not for streaming audio from the DC800 to the PC? I'm trying
> to stream audio from the PC to the DC800. I can't seem to find any
> documentation on a2recv except the small snippet below from the
> bluetooth-alsa build page.
>
> >The A2DP sink code receives a stream from another device. Run it with:
> > hciconfig hci0 class 0x200404
> > sdptool add A2SNK
> > ./a2recv
>
> >It will try to bind to the bluetooth adapter and send audio out to
> /dev/dsp.
>
> I have installed the btsco package and tried running this and a2recv
> just hangs with no output. Is there something else I need to do before
> running a2recv?
>
> I've also tried the command
>
> mpg123 --au - file.mp3 | ./a2play bdaddr
>
> where bdaddr is the address of the DC800, but this give no audio output
> either.
>
> Any help would be very much appreciated.
>
> Regards,
> Stephan
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>

--
Brad