From: "Dark Shadow" <shadowofdarkness@gmail.com>
To: "BlueZ users" <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Trouble loading firmware with bcm203x
Date: Sat, 16 Dec 2006 02:14:08 -0700 [thread overview]
Message-ID: <231dafb50612160114y6ee8b889ibbe71cd96dbd79b9@mail.gmail.com> (raw)
In-Reply-To: <1166262274.6557.1.camel@aeonflux.holtmann.net>
On 12/16/06, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi,
>
> > > I just bought a Bluetooth dongle that uses the Broadcom 4503 chipset
> > > and I am having trouble getting stable use out of it. I have got it to
> > > work twice before with the following steps
> > >
> > > plug it in
> > > modprobe bcm203x
> > > hciconfig up
> > > hciconfig reset (hours of googling to find out this is required)
> >
> > For my Broadcom BCM2045B2 chipset dongle loading the hci_usb module
> > with "reset=1" worked wonderfully.
>
> if you post the content of /proc/bus/usb/devices, I can make the reset
> option permanent for this dongle and you don't have to worry about it
> anymore.
>
> Regards
>
> Marcel
>
>
Here is the output. Note that the firmware is not loaded. When it does
load it adds a fourth entry in lsusb with 0a5c:2120 (Note the device
may be wrong since it is from memory) this one is the one that gets
ran by the hci_usb before the firmware is loaded the dongle +
mouse(included in package) work like any wireless usb mouse.
I also in my first message mixed up the chipset info it is a 2045 I
accidently wrote the device id
If I ever get the firmware loaded again I will get the devices output from then.
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-ck1shadow ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:13.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-ck1shadow ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:13.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 3/900 us ( 0%), #Int= 3, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-ck1shadow ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:13.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 32 Spd=12 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4500 Rev= 1.00
S: Manufacturer=Broadcom
S: Product=BCM2045B2
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=32 Port=01 Cnt=01 Dev#= 33 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4502 Rev= 1.00
S: Manufacturer=Broadcom Corp
S: Product=BCM2045B3 ROM
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=02 Prnt=32 Port=02 Cnt=02 Dev#= 34 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4503 Rev= 1.00
S: Manufacturer=Broadcom Corp
S: Product=BCM2045B3 ROM
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2006-12-16 9:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-16 6:11 [Bluez-users] Trouble loading firmware with bcm203x Dark Shadow
2006-12-16 7:57 ` Arthur
2006-12-16 8:15 ` Dark Shadow
2006-12-16 9:44 ` Marcel Holtmann
2006-12-16 8:50 ` Arthur
2006-12-16 9:14 ` Dark Shadow [this message]
2006-12-16 20:56 ` Dark Shadow
2006-12-17 12:20 ` Marcel Holtmann
2006-12-18 4:24 ` Dark Shadow
2006-12-18 7:34 ` Dark Shadow
2006-12-19 18:55 ` Dark Shadow
2006-12-27 6:01 ` Dark Shadow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=231dafb50612160114y6ee8b889ibbe71cd96dbd79b9@mail.gmail.com \
--to=shadowofdarkness@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox