From: Szymon Janc <szymon.janc@tieto.com>
To: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 1/2] android/handsfree: Add helper to check codec negotiation support
Date: Thu, 30 Oct 2014 11:45:49 +0100 [thread overview]
Message-ID: <2743363.kKbHWhdAb9@leonov> (raw)
In-Reply-To: <1414624053-24250-1-git-send-email-lukasz.rymanowski@tieto.com>
Hi Łukasz,
On Thursday 30 of October 2014 00:07:32 Lukasz Rymanowski wrote:
> This patch adds helper to test if codec negotiation is supported.
>
> This patch fixes also logic behind that. So far we assumed that codec
> negotiation is there if HFP HF does support it, even HFP AG does not
> support it. It cause a problem with e.g. SLC creation in scenario where
> HFP AG is not supporting codec negoctiation. In such a case we
> incorrectly reply with ERROR on AT+CIND? because we incorretly expected
> AT+BAC before that command. Issue found on UPF.
> ---
> android/handsfree.c | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/android/handsfree.c b/android/handsfree.c
> index 356dbe0..595919a 100644
> --- a/android/handsfree.c
> +++ b/android/handsfree.c
> @@ -938,6 +938,12 @@ done:
> hfp_gw_send_info(dev->gw, "+BCS: %u", type);
> }
>
> +static bool codec_negotiation_supported(struct hf_device *dev)
> +{
> + return (dev->features & HFP_HF_FEAT_CODEC) &&
> + (hfp_ag_features & HFP_AG_FEAT_CODEC);
> +}
> +
> static void connect_sco_cb(GIOChannel *chan, GError *err, gpointer
> user_data) {
> struct hf_device *dev = user_data;
> @@ -947,7 +953,7 @@ static void connect_sco_cb(GIOChannel *chan, GError
> *err, gpointer user_data)
>
> set_audio_state(dev, HAL_EV_HANDSFREE_AUDIO_STATE_DISCONNECTED);
>
> - if (!(dev->features & HFP_HF_FEAT_CODEC))
> + if (!codec_negotiation_supported(dev))
> return;
>
> /* If other failed, try connecting with CVSD */
> @@ -977,7 +983,7 @@ static bool connect_sco(struct hf_device *dev)
> if (dev->sco)
> return false;
>
> - if (!(dev->features & HFP_HF_FEAT_CODEC))
> + if (!codec_negotiation_supported(dev))
> voice_settings = 0;
> else if (dev->negotiated_codec != CODEC_ID_CVSD)
> voice_settings = BT_VOICE_TRANSPARENT;
> @@ -1012,7 +1018,7 @@ static void at_cmd_bcc(struct hfp_gw_result *result,
> enum hfp_gw_cmd_type type,
>
> switch (type) {
> case HFP_GW_CMD_TYPE_COMMAND:
> - if (!(dev->features & HFP_HF_FEAT_CODEC))
> + if (!codec_negotiation_supported(dev))
> break;
>
> if (hfp_gw_result_has_next(result))
> @@ -1204,7 +1210,7 @@ static void at_cmd_cind(struct hfp_gw_result *result,
> enum hfp_gw_cmd_type type, * If device supports Codec Negotiation, AT+BAC
> should be
> * received first
> */
> - if ((dev->features & HFP_HF_FEAT_CODEC) &&
> + if (codec_negotiation_supported(dev) &&
> !dev->codecs[CVSD_OFFSET].remote_supported)
> break;
>
> @@ -1336,7 +1342,7 @@ static void at_cmd_bac(struct hfp_gw_result *result,
> enum hfp_gw_cmd_type type,
>
> switch (type) {
> case HFP_GW_CMD_TYPE_SET:
> - if (!(dev->features & HFP_HF_FEAT_CODEC))
> + if (!codec_negotiation_supported(dev))
> goto failed;
>
> /* set codecs to defaults */
> @@ -1765,7 +1771,7 @@ static bool connect_audio(struct hf_device *dev)
> return false;
>
> /* we haven't negotiated codec, start selection */
> - if ((dev->features & HFP_HF_FEAT_CODEC) && !dev->negotiated_codec) {
> + if (codec_negotiation_supported(dev) && !dev->negotiated_codec) {
> select_codec(dev, 0);
> return true;
> }
This patch is now applied, thanks.
--
BR
Szymon Janc
prev parent reply other threads:[~2014-10-30 10:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-29 23:07 [PATCH 1/2] android/handsfree: Add helper to check codec negotiation support Lukasz Rymanowski
2014-10-29 23:07 ` [PATCH 2/2] android/handsfree: Be more strict on SLC creation Lukasz Rymanowski
2014-10-30 10:23 ` Szymon Janc
2014-10-30 15:39 ` Lukasz Rymanowski
2014-10-30 10:45 ` Szymon Janc [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2743363.kKbHWhdAb9@leonov \
--to=szymon.janc@tieto.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=lukasz.rymanowski@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).