From: Szymon Janc <szymon.janc@tieto.com>
To: Mariusz Skamra <mariusz.skamra@tieto.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH] android/pts: Update A2DP test results
Date: Fri, 22 May 2015 15:04:21 +0200 [thread overview]
Message-ID: <2907080.iFFE4HL3s5@leonov> (raw)
In-Reply-To: <1432207750-10157-1-git-send-email-mariusz.skamra@tieto.com>
Hi Mariusz,
On Thursday 21 of May 2015 13:29:10 Mariusz Skamra wrote:
> PTS 6.1 and Android 5.1
> ---
> android/pics-a2dp.txt | 10 +++++-----
> android/pixit-a2dp.txt | 2 +-
> android/pts-a2dp.txt | 31 +++++++++++++++++++------------
> 3 files changed, 25 insertions(+), 18 deletions(-)
>
> diff --git a/android/pics-a2dp.txt b/android/pics-a2dp.txt
> index 1328e7e..2e87104 100644
> --- a/android/pics-a2dp.txt
> +++ b/android/pics-a2dp.txt
> @@ -1,6 +1,6 @@
> A2DP PICS for the PTS tool.
>
> -PTS version: 6.0
> +PTS version: 6.1
>
> * - different than PTS defaults
> # - not yet implemented/supported
> @@ -76,8 +76,8 @@ TSPC_A2DP_3_6 False SRC: MPEG-2,4 AAC encoder
(C.1)
> TSPC_A2DP_3_7 False SRC: ATRAC family decoder (C.1)
> TSPC_A2DP_3_8 False SRC: ATRAC family encoder (C.1)
> ---------------------------------------------------------------------------
> ---- -C.1: At least one of the implementations shall be supported if 12/2
> (Optional - codec) is supported, else excluded.
> +C.1: At least one of the implementations shall be supported if 3/2
> + is supported, else excluded.
> ---------------------------------------------------------------------------
> ----
>
>
> @@ -138,8 +138,8 @@ TSPC_A2DP_5_3 False SNK: MPEG-1,2 Audio (C.1)
> TSPC_A2DP_5_4 False SNK: MPEG-2,4 AAC (C.1)
> TSPC_A2DP_5_5 False SNK: ATRAC family (C.1)
> ---------------------------------------------------------------------------
> ---- -C.1: At least one codec shall be supported if Table 13/2 (Optional
> codec - decoder) is supported, otherwise excluded.
> +C.1: At least one codec shall be supported if Table 5/2 is supported,
> otherwise + excluded.
> ---------------------------------------------------------------------------
> ----
>
>
> diff --git a/android/pixit-a2dp.txt b/android/pixit-a2dp.txt
> index b6ef742..c7f9762 100644
> --- a/android/pixit-a2dp.txt
> +++ b/android/pixit-a2dp.txt
> @@ -1,6 +1,6 @@
> A2DP PIXIT for the PTS tool.
>
> -PTS version: 6.0
> +PTS version: 6.1
>
> * - different than PTS defaults
> & - should be set to IUT Bluetooth address
> diff --git a/android/pts-a2dp.txt b/android/pts-a2dp.txt
> index 500c631..79bd348 100644
> --- a/android/pts-a2dp.txt
> +++ b/android/pts-a2dp.txt
> @@ -1,8 +1,8 @@
> PTS test results for A2DP
>
> -PTS version: 6.0
> -Tested: 14-January-2015
> -Android version: 5.0
> +PTS version: 6.1
> +Tested 21-May-2015
> +Android version: 5.1
>
> Results:
> PASS test passed
> @@ -15,24 +15,29 @@ N/A test is disabled due to PICS setup
> Test Name Result Notes
> ---------------------------------------------------------------------------
> ---- TC_SRC_CC_BV_09_I PASS Start streaming
> -TC_SRC_CC_BV_10_I PASS
> -TC_SRC_REL_BV_01_I PASS Connect to PTS from IUT. When requested
> - disconnect from IUT
> -TC_SRC_REL_BV_02_I PASS
> -TC_SRC_SET_BV_01_I PASS Connect to PTS (open a2dp)
> +TC_SRC_CC_BV_10_I PASS Start streaming
> +TC_SRC_REL_BV_01_I PASS When requested disconnect from IUT
> +TC_SRC_REL_BV_02_I PASS Start streaming
> +TC_SRC_SET_BV_01_I PASS
> TC_SRC_SET_BV_02_I PASS
> TC_SRC_SET_BV_03_I PASS Start streaming
> TC_SRC_SET_BV_04_I PASS Start streaming
> -TC_SRC_SET_BV_05_I PASS IUT must be moved out of range
> - JIRA issue BA-314
> +TC_SRC_SET_BV_05_I PASS Start streaming
> + IUT must be moved out of range
> + Initiate connection
> TC_SRC_SET_BV_06_I PASS IUT must be moved out of range
> -TC_SRC_SUS_BV_01_I PASS Stop streaming
> -TC_SRC_SUS_BV_02_I PASS
> + PTS issue#13469
> + To pass set TSPX_no_avrcp to TRUE
> +TC_SRC_SUS_BV_01_I PASS Start streaming
> + Stop streaming
> + Start streaming
> +TC_SRC_SUS_BV_02_I PASS Start streaming
> TC_SRC_SDP_BV_01_I PASS
> TC_SRC_AS_BV_01_I PASS Requires checking if the output on the IUT is
> correct
> TC_SRC_AS_BV_02_I N/A
> TC_SRC_AS_BV_03_I N/A
> +TC_SRC_SYN_BV_02_I N/A
> ---------------------------------------------------------------------------
> ----
>
>
> @@ -60,4 +65,6 @@ TC_SNK_SUS_BV_01_I N/A
> TC_SNK_SUS_BV_02_I N/A
> TC_SNK_SDP_BV_02_I N/A
> TC_SNK_AS_BV_01_I N/A
> +TC_SNK_AS_BV_02_I N/A
> +TC_SNK_SYN_BV_01_I N/A
> ---------------------------------------------------------------------------
> ----
Applied, thanks.
--
BR
Szymon Janc
next prev parent reply other threads:[~2015-05-22 13:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-21 11:29 [PATCH] android/pts: Update A2DP test results Mariusz Skamra
2015-05-22 13:04 ` Szymon Janc [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-08-08 20:00 Lukasz Rymanowski
2014-08-11 7:17 ` Johan Hedberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2907080.iFFE4HL3s5@leonov \
--to=szymon.janc@tieto.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=mariusz.skamra@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox