linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Szymon Janc <szymon.janc@tieto.com>
To: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 1/2] android/pts: Update PAN PTS 6.1 results for android 5.1
Date: Wed, 13 May 2015 16:45:40 +0200	[thread overview]
Message-ID: <3161913.DBqB8O5h5c@leonov> (raw)
In-Reply-To: <1431357454-30227-1-git-send-email-grzegorz.kolodziejczyk@tieto.com>

Hi Grzegorz,

On Monday 11 of May 2015 17:17:33 Grzegorz Kolodziejczyk wrote:
> This patch updates test case list and results for PAN profile against
> android 5.1.
> ---
>  android/pics-pan.txt  |  2 +-
>  android/pixit-pan.txt |  2 +-
>  android/pts-pan.txt   | 49
> ++++++++++++++++++++++--------------------------- 3 files changed, 24
> insertions(+), 29 deletions(-)
> 
> diff --git a/android/pics-pan.txt b/android/pics-pan.txt
> index 73461f5..57863c0 100644
> --- a/android/pics-pan.txt
> +++ b/android/pics-pan.txt
> @@ -1,6 +1,6 @@
>  PAN PICS for the PTS tool.
> 
> -PTS version: 6.0
> +PTS version: 6.1
> 
>  * - different than PTS defaults
>  # - not yet implemented/supported
> diff --git a/android/pixit-pan.txt b/android/pixit-pan.txt
> index 6c00d27..713646e 100644
> --- a/android/pixit-pan.txt
> +++ b/android/pixit-pan.txt
> @@ -1,6 +1,6 @@
>  PAN PIXIT for the PTS tool.
> 
> -PTS version: 6.0
> +PTS version: 6.1
> 
>  * - different than PTS defaults
>  & - should be set to IUT or PTS Bluetooth/MAC address respectively
> diff --git a/android/pts-pan.txt b/android/pts-pan.txt
> index ba4afac..350b84e 100644
> --- a/android/pts-pan.txt
> +++ b/android/pts-pan.txt
> @@ -1,8 +1,8 @@
>  PTS test results for PAN
> 
> -PTS version: 6.0
> -Tested: 17-February-2015
> -Android version: 5.0
> +PTS version: 6.1
> +Tested: 11-May-2015
> +Android version: 5.1
> 
>  Results:
>  PASS	test passed
> @@ -11,7 +11,7 @@ INC	test is inconclusive
>  N/A	test is disabled due to PICS setup
> 
>  ---------------------------------------------------------------------------
> ----- -Test Name				Result	Notes
> +Test Name					Result	Notes
>  ---------------------------------------------------------------------------
> ----- TC_BNEP_BROADCAST_0_BV_01_C			N/A
>  TC_BNEP_BROADCAST_0_BV_02_C			N/A
> @@ -39,38 +39,33 @@ TC_BNEP_FILTER_BV_14_C_TESTER_2			N/A
>  TC_BNEP_FILTER_BV_15_C_TESTER_1			N/A
>  TC_BNEP_FILTER_BV_15_C_TESTER_2			N/A
>  TC_BRIDGE_TX_BV_01_I				PASS
> -TC_BRIDGE_RX_BV_02_I				PASS
> -						To initiate general ethernet
> -						use for e.g. ping.
> -TC_IPv4_AUTONET_BV_01_I				PASS
> -						To initiate general ethernet
> -						use for e.g. ping.
> +TC_BRIDGE_RX_BV_02_I				PASS	To initiate general
> +							ethernet use for e.g.
> +							ping.
> +TC_IPv4_AUTONET_BV_01_I				PASS	To initiate general
> +							ethernet use for e.g.
> +							ping.
>  TC_IPv6_AUTONET_BV_02_I				N/A
>  TC_IP_DHCP_BV_03_I				PASS
>  TC_IP_LLMNR_BV_01_I				N/A
>  TC_IP_LLMNR_BV_02_I				N/A
>  TC_IP_DNS_BV_01_I				N/A
> -TC_IP_APP_BV_03_I				ip neighbour add <PTS IP addr>
> -							lladdr <PTS HW addr>
> -							dev bt-pan
> -						ping -c 1 <PTS IP addr>
> -						Note: Add ARP record if bt-pan
> -							connection is
> -							established
> -TC_IP_APP_BV_05_I				ip neighbour add <PTS IP addr>
> -							lladdr <PTS HW addr>
> -							dev bt-pan
> -						Note: Add of ARP record should
> -							be done immediately
> -							after establish of
> -							bt-pan, because PTS
> -							treat other than ICMP
> -							frames as error.
> +TC_IP_APP_BV_03_I				N/A
> +TC_IP_APP_BV_05_I				INC	PTS issue #13436
> +							ip neighbour add
> +							<PTS IP addr> lladdr
> +							<PTS HW addr> dev bt-pan
> +							Note: ARP record should
> +							be add immediately after
> +							establish of bt-pan,
> +							because PTS treat other
> +							than ICMP frames as
> +							error.
>  TC_MISC_ROLE_BV_01_C				N/A
>  TC_MISC_ROLE_BV_02_C				N/A
>  TC_MISC_UUID_BV_01_C				PASS
>  TC_MISC_UUID_BV_02_C				PASS
>  TC_SDP_NAP_BV_01_C				PASS
>  TC_SDP_GN_BV_01_C				N/A
> -TC_SDP_PANU_BV_01_C				PASS
> +TC_SDP_PANU_BV_01_C				N/A
>  ---------------------------------------------------------------------------
> -----

Both patches applied, thanks.

-- 
BR
Szymon Janc

      parent reply	other threads:[~2015-05-13 14:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-11 15:17 [PATCH 1/2] android/pts: Update PAN PTS 6.1 results for android 5.1 Grzegorz Kolodziejczyk
2015-05-11 15:17 ` [PATCH 2/2] android/pts: Update BNEP " Grzegorz Kolodziejczyk
2015-05-13 14:45 ` Szymon Janc [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3161913.DBqB8O5h5c@leonov \
    --to=szymon.janc@tieto.com \
    --cc=grzegorz.kolodziejczyk@tieto.com \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).