From: Nigel Magnay <nigel.magnay@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] ipaq 1945
Date: Sun, 26 Sep 2004 13:44:50 +0100 [thread overview]
Message-ID: <320075ff0409260544471bf1f8@mail.gmail.com> (raw)
In-Reply-To: <1096187290.7719.20.camel@pegasus>
I get this when the iPAQ connects - this is before I assign an IP to
the bnep0 interface though
HCIDump - HCI packet analyzer ver 1.12
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
79 AF 80 3E 04 00 10 01 12 01
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
79 AF 80 3E 04 00 00
> HCI Event: Command Status (0x0f) plen 4
00 01 09 04
> HCI Event: Link Key Request (0x17) plen 6
79 AF 80 3E 04 00
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
79 AF 80 3E 04 00 C2 A3 81 7E E7 06 52 8D 9D 8F 91 5C FF 3A
90 8A
> HCI Event: Role Change (0x12) plen 8
00 79 AF 80 3E 04 00 00
> HCI Event: Command Complete (0x0e) plen 10
01 0B 04 00 79 AF 80 3E 04 00
> HCI Event: Connect Complete (0x03) plen 11
00 28 00 79 AF 80 3E 04 00 01 01
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
28 00 0F 00
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
79 AF 80 3E 04 00 01
> HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 28 00
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
28 00 18 CC
> HCI Event: Max Slots Change (0x1b) plen 3
28 00 05
> HCI Event: Command Status (0x0f) plen 4
00 01 0F 04
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
00 28 00 18 CC
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 20
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 8
MTU 512 FlushTO 65535
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0028 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 1]
SDP SS Req: tid 0x0 len 0x8
pat uuid-16 0x1116 (NAP)
max 0x14
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 1]
SDP SS Rsp: tid 0x0 len 0x9
tot 0x1 cur 0x1 hndl 0x804db38
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 23
L2CAP(d): cid 0x0040 len 19 [psm 1]
SDP SA Req: tid 0x1 len 0xe
hndl 0x804db38
max 0x1f0
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 106
L2CAP(d): cid 0x0040 len 102 [psm 1]
SDP SA Rsp: tid 0x1 len 0x61
cnt 0x5e
aid 0x0000 (SrvRecHndl)
uint 0x804db38
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1116 (NAP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0xf > <
uuid-16 0x000f (BNEP) uint 0x100 < uint 0x800 uint 0x806 > > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1116 (NAP) uint 0x100 > >
aid 0x0100 (SrvName)
str "Network Access Point"
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0041
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 20
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 8
MTU 1691 FlushTO 65535
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0028 flags 0x02 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 15]
BNEP: Control(0x01|0)
Setup Req(0x01) size 0x02 dst 0x1116(NAP) src 0x1115(PANU)
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 15]
BNEP: Control(0x01|0)
Setup Rsp(0x02) res 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 85
L2CAP(d): cid 0x0040 len 81 [psm 15]
BNEP: Compressed DestOnly(0x04|0)
dst 33:33:ff:80:af:79 [proto 0x86dd]
60 00 00 00 00 20 00 01 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 FF 02 00 00 00 00 00 00 00 00 00 01 FF 80 AF 79
3A 00 05 02 00 00 01 00 83 00 20 B0 00 00 00 00 FF 02 00 00
00 00 00 00 00 00 00 01 FF 80 AF 79
> ACL data: handle 0x0028 flags 0x02 dlen 61
L2CAP(d): cid 0x0040 len 57 [psm 15]
BNEP: Compressed DestOnly(0x04|0)
dst 33:33:00:00:00:02 [proto 0x86dd]
60 00 00 00 00 08 3A FF 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 FF 02 00 00 00 00 00 00 00 00 00 00 00 00 00 02
85 00 7B B8 00 00 00 00
> ACL data: handle 0x0028 flags 0x02 dlen 77
L2CAP(d): cid 0x0040 len 73 [psm 15]
BNEP: Compressed DestOnly(0x04|0)
dst 33:33:ff:80:af:79 [proto 0x86dd]
60 00 00 00 00 18 3A FF 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 FF 02 00 00 00 00 00 00 00 00 00 01 FF 80 AF 79
87 00 DD 2F 00 00 00 00 FE 80 00 00 00 00 00 00 02 04 3E FF
FE 80 AF 79
> ACL data: handle 0x0028 flags 0x02 dlen 69
L2CAP(d): cid 0x0040 len 65 [psm 15]
BNEP: Compressed DestOnly(0x04|0)
dst 33:33:00:00:00:02 [proto 0x86dd]
60 00 00 00 00 10 3A FF FE 80 00 00 00 00 00 00 02 04 3E FF
FE 80 AF 79 FF 02 00 00 00 00 00 00 00 00 00 00 00 00 00 02
85 00 9F 32 00 00 00 00 01 01 00 04 3E 80 AF 79
> ACL data: handle 0x0028 flags 0x02 dlen 85
L2CAP(d): cid 0x0040 len 81 [psm 15]
BNEP: Compressed DestOnly(0x04|0)
dst 33:33:ff:80:af:79 [proto 0x86dd]
60 00 00 00 00 20 00 01 FE 80 00 00 00 00 00 00 02 04 3E FF
FE 80 AF 79 FF 02 00 00 00 00 00 00 00 00 00 01 FF 80 AF 79
3A 00 05 02 00 00 01 00 83 00 33 31 00 00 00 00 FF 02 00 00
00 00 00 00 00 00 00 01 FF 80 AF 79
next prev parent reply other threads:[~2004-09-26 12:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-25 22:37 [Bluez-users] ipaq 1945 Nigel Magnay
2004-09-25 23:09 ` Marcel Holtmann
2004-09-26 8:12 ` Nigel Magnay
2004-09-26 8:28 ` Marcel Holtmann
2004-09-26 12:44 ` Nigel Magnay [this message]
2004-09-26 11:20 ` Wolfgang
2004-09-27 7:50 ` Nigel Magnay
2004-09-28 11:44 ` Marcel Holtmann
2004-09-28 12:25 ` Nigel Magnay
2004-09-28 12:28 ` Marcel Holtmann
2004-09-28 13:19 ` Peter Stephenson
2004-09-28 13:46 ` Nigel Magnay
2004-09-28 14:17 ` Marcel Holtmann
2004-10-01 1:25 ` [Bluez-users] " O Plameras
2004-10-01 7:55 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2004-09-28 11:28 [Bluez-users] " Jurgens du Toit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=320075ff0409260544471bf1f8@mail.gmail.com \
--to=nigel.magnay@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox