Re: [PATCH] android/pts: RFCOMM PTS 5.3 update

[Szymon Janc <szymon.janc@tieto.com>]

Hi Sebastian,

On Thursday 09 of October 2014 17:15:44 Sebastian Chlad wrote:
> PTS tests results for RFCOMM on PTS 5.3.
> PICS' and PIXITs checked against PTS 5.3.
> ---
>  android/pics-rfcomm.txt  |  2 +-
>  android/pixit-rfcomm.txt |  2 +-
>  android/pts-rfcomm.txt   | 22 ++++++++--------------
>  3 files changed, 10 insertions(+), 16 deletions(-)
> 
> diff --git a/android/pics-rfcomm.txt b/android/pics-rfcomm.txt
> index 9dfb32e..c970363 100644
> --- a/android/pics-rfcomm.txt
> +++ b/android/pics-rfcomm.txt
> @@ -1,6 +1,6 @@
>  RFCOMM PICS for the PTS tool.
>  
> -PTS version: 5.2
> +PTS version: 5.3
>  
>  * - different than PTS defaults
>  # - not yet implemented/supported
> diff --git a/android/pixit-rfcomm.txt b/android/pixit-rfcomm.txt
> index 07810d2..187f3b4 100644
> --- a/android/pixit-rfcomm.txt
> +++ b/android/pixit-rfcomm.txt
> @@ -1,6 +1,6 @@
>  RFCOMM PIXIT for the PTS tool.
>  
> -PTS version: 5.2
> +PTS version: 5.3
>  
>  * - different than PTS defaults
>  & - should be set to IUT Bluetooth address
> diff --git a/android/pts-rfcomm.txt b/android/pts-rfcomm.txt
> index 9bfc7a2..d869ee0 100644
> --- a/android/pts-rfcomm.txt
> +++ b/android/pts-rfcomm.txt
> @@ -1,7 +1,7 @@
>  PTS test results for RFCOMM
>  
> -PTS version: 5.2
> -Tested: 17-July-2014
> +PTS version: 5.3
> +Tested: 08-October-2014
>  Android version: 4.4.4
>  
>  Results:
> @@ -17,29 +17,23 @@ Test Name		Result	Notes
>  TC_RFC_BV_01_C		PASS	rctest -n -P 1 <btaddr>
>  TC_RFC_BV_02_C		PASS	rctest -r -P 1
>  TC_RFC_BV_03_C		PASS	rctest -r -P 1
> -TC_RFC_BV_04_C		FAIL	PTS issue #12421
> -				PTS issue #12414
> -				NOTE: DISC on DLC is expected; IUT disconnects
> -					rfcomm session (close)
> +TC_RFC_BV_04_C		PASS	NOTE: use ets provided in PTS issue #12414
>  TC_RFC_BV_05_C		PASS	rctest -n -P 4 <btaddr>
>  				Note: test requires IUT to connect on the given
>  				channel. sdptool browse <btaddr> to check the
>  				channel.
>  TC_RFC_BV_06_C		PASS	rctest -r -P 1
>  TC_RFC_BV_07_C		PASS	rctest -r -P 1
> -TC_RFC_BV_08_C		INC	PTS issue #12397
> -				NOTE: Incorrect frame type sent in response to
> -					the DISC command
> +TC_RFC_BV_08_C		PASS	rctest -r -P 1
> +				Note: use ets provided in PTS issue #12397
>  TC_RFC_BV_11_C		PASS	rctest -r -P 1
> -TC_RFC_BV_13_C		FAIL	PTS issue #12397
> -				NOTE: IUT sent the correct frame type (UIH)
> -				but the parameters did not match the
> -				requirements
> +TC_RFC_BV_13_C		PASS	rctest -r -P 1
> +				Note: use ets provided in PTS issue #12397
>  TC_RFC_BV_14_C		N/A
>  TC_RFC_BV_15_C		PASS	rctest -r -P 1
>  TC_RFC_BV_17_C		PASS	rctest -d -P 1
>  TC_RFC_BV_19_C		PASS
>  TC_RFC_BV_21_C		INC	PTS issue #12421
>  TC_RFC_BV_22_C		INC	PTS issue #12421
> -TC_RFC_BV_25_C		INC	PTS issue #12421
> +TC_RFC_BV_25_C		INC	PTS issue #12621
>  -------------------------------------------------------------------------------
> 

Applied (after moving PTS issues into same line as affected test name). Thanks.

-- 
Best regards, 
Szymon Janc